The role of MgF2 in the development of spark plasma sintered transparent MgAl2O4 ceramics

The role of MgF2 in the development of spark plasma sintered transparent MgAl2O4 ceramics

Bibliografiska uppgifter
Parent link:	Ceramics International.— .— Amsterdam: Elsevier Science Publishing Company Inc. Vol. 52, iss. 6.— 2026.— P. 7339-7347
Övriga upphovsmän:	Paygin V. D. Vladimir Denisovich, Huang Fuli, Deulina D. E. Darjya Evgenjevna, Stepanov S. A. Sergey Aleksandrovich, Dvilis E. S. Edgar Sergeevich, Valiev D. T. Damir Talgatovich, Khasanov O. L. Oleg Leonidovich, Shevchenko I. N. Ivan Nikolaevich
Sammanfattning:	Title screen In this work, transparent magnesium aluminate spinel (MgAl2O4) ceramics with the introduction of magnesium fluoride (MgF2) nanopowder in a concentration of 0–1.0 wt %, fabricated by the Spark Plasma Sintering (SPS) method were studied. The influence of MgF2 additive concentrations on the shrinkage dynamics during SPS process, microstructure, optical and mechanical properties of MgAl2O4 ceramics was investigated. It was found that the optimal concentration of MgF2 additive is 0.1 wt%., which allows obtaining MgAl2O4 ceramics with an acceptable combination of the physical properties (Tλ = 600 = 74.6 %, Tλ = 4500 = 79.3 %, Hv =16.4 ± 0.4 GPa, К1s = 3.4 ± 0.05 MPa m1/2) Текстовый файл AM_Agreement
Språk:	engelska
Publicerad:	2026
Ämnen:	электронный ресурс труды учёных ТПУ Magnesium aluminate spinel (MgAl2O4) Magnesium fluoride (MgF2) Spark plasma sintering Sintering additive Microstructure Optical properties Mechanical properties
Länkar:	https://doi.org/10.1016/j.ceramint.2025.12.475
Materialtyp:	Elektronisk Bokavsnitt
KOHA link:	https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=685171

Liknande verk

LiF influence on spark plasma sintering and structure of transparent MgAl2O4 ceramics
Publicerad: (2025)

The Effect of Thermal Annealing on Mechanical and Optical Properties of MgAl2O4 Ceramics Fabricated by Spark Plasma Sintering
Publicerad: (2024)

Optical and luminescent properties of MgAl2O4 ceramics doped with high level of Eu3+ ions concentrations
Publicerad: (2023)

Transparent Ceramics Fabricated via Spark Plasma Sintering–Magnesium Aluminate Spinel with Increased Aspect Ratio
Publicerad: (2024)

Influence of Temperature on the Luminescence Properties of MgAl2O4:Dy3+ Ceramics Synthesized by Spark Plasma Sintering
Publicerad: (2019)

The particle size effect of CeO2 on the structure and properties of MgAl2O4 spinel ceramics
Publicerad: (2025)

Sintering and characterization of novel multilayered MgAl2O4/YAG, MgAl2O4/YSZ and YAG/YSZ ceramic-ceramic architectures for photonic applications
Publicerad: (2023)

Влияние фторида магния на светопропускание прозрачной керамики из алюмомагниевой шпинели
Publicerad: (2024)

Fabrication and properties of novel multilayered Y3Al5O12/MgAl2O4 ceramics doped with rare-earth ions
Publicerad: (2024)

Effect of Tb4O7 content on the optical and mechanical properties of transparent ceramics based on MgAl2O4
Publicerad: (2019)

Manufacturing of Transparent MgAl2O4 Ceramics by Spark Plasma Sintering Combined with Collector Pressing Method
Publicerad: (2025)

Structural and Luminescent Peculiarities of Spark PlasmaSintered Transparent MgAl2O4 Spinel Ceramics Doped withCerium Ions
Publicerad: (2022)

Импульсная катодолюминесценция примесных центров в керамике на основе шпинели MgAl2O4
Publicerad: (2018)

Structural and Spectroscopic Characterization of Tb3+-Doped MgAl2O4 Spinel Ceramics Fabricated by Spark Plasma Sintering Technique
Publicerad: (2020)

Synthesis and optical properties of Tb3+ or Dy3+-doped MgAl2O4 transparent ceramics
Publicerad: (2019)

Transparent Magnesium Aluminate Spinel Ceramics Reinforced by Alumina Nanofibers
Publicerad: (2024)

Применение комплексного критерия для оценки качества армированной прозрачной керамики MgAl2O4
av: Шевченко И. Н. Иван Николаевич
Publicerad: (2025)

Cr3+-doped MgAl2O4 spinel ceramics fabricated by arc plasma melting method
Publicerad: (2025)

Technological aspects of Mn-doped MgAl2O4 luminescent spinel ceramics fabricated by arc plasma synthesis method
Publicerad: (2025)

Application of collector pressing method to manufacture various optically transparent oxide ceramics using SPS technique
Publicerad: (2022)

Multilayered converters based on ZrO2-Y2O3/MgAl2O4 ceramics doped with Eu/Ce fabricated by SPS technique
Publicerad: (2025)

Refractory ceramics based on magnesium–aluminate spinel and periclase of the Satka deposit
Publicerad: (2024)

Luminescence of the tungsten-activated MgF2 ceramics synthesized under the electron beam
Publicerad: (2018)

Влияние малых концентраций CeO2 на свойства прозрачной керамики на основе MgAl2O4
Publicerad: (2018)

Fabrication of zirconia ceramics by sintering in a magnetic field
Publicerad: (2021)

Effect of Severe Plastic Deformation by Extrusion on Microstructure and Physical and Mechanical Properties of Mg–Y–Nd and Mg–Ca Alloys
Publicerad: (2022)

Ti3SiC2 MAX-Phase-Based Composites Produced by Vacuum and Spark Plasma Sintering
Publicerad: (2025)

Effect of Spark Plasma Sintering Temperature on the Properties of Transparent YSZ Ceramics
Publicerad: (2019)

Severe Plastic Deformation of Mg–Zn–Zr–Ce Alloys: Advancing Corrosion Resistance and Mechanical Strength for Medical Applications
Publicerad: (2023)

Preceramic paper-derived Ti3Al(Si)C2-based composites obtained by spark plasma sintering
Publicerad: (2021)

The influence of ZrO2 additive on sintering and microstructure of lithium and lithium-titanium-zinc ferrites
Publicerad: (2018)

MgF2-Based Luminescing Ceramics
Publicerad: (2019)

Influence of Severe Plastic Deformation by Extrusion on Microstructure, Deformation and Thermal Behavior under Tension of Magnesium Alloy Mg-2.9Y-1.3Nd
Publicerad: (2023)

Effect of technological parameters on optical and mechanical properties of Spark Plasma Sintered transparent YSZ ceramics
Publicerad: (2021)

Синтез и свойства порошков алюмомагниевой шнипели полученных разными методами
av: Лю Синьюй
Publicerad: (2024)

Preceramic paper derived Ti3AlC2 – TiC – Al2O3 composites obtained via spark plasma sintering
Publicerad: (2026)

Enhancing luminescent performance in spark plasma sintered YSZ/YAG multilayer ceramics through ultrasound processing
Publicerad: (2025)

Spark Plasma Sintering of Paper-Derived Ti3AlC2-Based Composites: Influence of Sintering Temperature
Publicerad: (2021)

Synthesis of MAX-Phase Ti3SiC2 by Combined Powder Metallurgy Technique
Publicerad: (2024)

Preceramic Paper-Derived SiCf/SiCp Composites Obtained by Spark Plasma Sintering: Processing, Microstructure and Mechanical Properties
Publicerad: (2020)