Laser initiaion of PETN-based composites with nano-sized absorbing additives of carbon and aluminum under conditions of various volume compression

Bibliographic Details
Parent link:Вестник Карагандинского университета. Физика.— .— Караганда: КарГУ
№ 4 (116).— 2024.— С. 133-142
Other Authors: Tsipilev V. P. Vladimir Papilovich, Oleshko V. I. Vladimir Ivanovich, Yakovlev A. N. Aleksey Nikolaevich, Ovchinnikov V. A. Vladislav Alekseevich, Zykov I. Yu. Iliya Yurievich, Forat E. V. Egor Viktorovich, Saidazimov (Saydazimov) I. A. Ibrokhimkhon Ayupkhonovich, Grechkina T. V. Tatiana Valerievna
Summary:Title screen
The energy thresholds and the kinetics of explosive decomposition of pentaerythritol tetranitrate (PETN) and its composites induced by the laser pulse (λ0 = 1064 nm; τи = 12 ns) in dependence on the concentration of absorbing additives and different volume compression within the range from 40 to 600 MPa are experimen- tally studied. The sensitivity of pure PETN and its composites increases along with the volume compression value. For low pressures (less than 200 MPa) with the increase of additives concentration the sensitivity of mixtures to laser pulse exposure increases and for higher pressures (more than 300 MPa) — it decreases. Such behavior is explained from the perspective of both diffuse light scattering and the thermal micro-spot model of initiating the transparent explosive components (the “hot spot” model), according to which the reac- tive capacity of hot spots is determined by their heat reserve, their concentration and the scale of gas dynamic unloading in the neighboring to hot spots pores and through the sample surface pressed by the input window (the area of low pressures), as well as by the heat conducting unloading of hot spots in the explosive compo- nents matrix and the covering glass (the area of high pressures)
Экспериментально исследованы энергетические пороги и кинетические характеристики взрывного разложения тэна и композитов на его основе при лазерном импульсном воздействии (λ0 = 1064 нм; τи = 12 нс) в зависимости от концентрации поглощающих добавок при различных давлениях объемного сжатия порошков (давлениях прижатия прозрачного входного окна) в диапазоне от 40 до 600 МПа. Показано, что для чистого тэна и композитов на его основе с ростом давления объемного сжатия чувствительность, в целом, увеличивается, но не монотонно. При этом в области малых давлений (менее 200 МПа) с возрастанием концентрации добавок чувствительность смесевых составов к лазерному импульсному воздействию увеличивается, а в области больших (более 300 МПа) — уменьшается. Та- кое поведение объясняется авторами с позиций как диффузного светорассеяния, так и с позиций тепловой микроочаговой модели инициирования прозрачных ВВ (модель «горячих точек» (ГТ)), согласно которой реакционная способность «горячих точек» определяется запасом тепла в их объеме, их концентрацией, газодинамической разгрузкой в близлежащие к ГТ поры и через прижатую входным окном поверхность образца (область малых давлений), а также теплопроводностной разгрузкой ГТ в матрицу ВВ и покровное стекло (область высоких давлений)
Текстовый файл
Published: 2024
Subjects:
Online Access:https://doi.org/10.31489/2024PH4/133-142
Format: Electronic Book Chapter
KOHA link:https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=679407