Structural and electromagnetic properties of 3D printed and electron beam sintered lithium ferrite ceramic
| Parent link: | Ceramics International.— .— Amsterdam: Elsevier Science Publishing Company Inc. Vol. 50, iss. 24, Pt A.— 2024.— P. 52632-52639 |
|---|---|
| مؤلف مشترك: | National Research Tomsk Polytechnic University (570) |
| مؤلفون آخرون: | Lysenko E. N. Elena Nikolaevna, Nikolaev E. V. Evgeny Vladimirovich, Vlasov V. A. Vitaliy Anatolievich, Svirkov Aleksandr Sergeevich A. S., Surzhikov A. P. Anatoly Petrovich, Artishchev S. A. Sergey Aleksandrovich |
| الملخص: | Title screen In this work, the structures and electromagnetic properties of lithium ferrite ceramics manufactured by the additive method, based on the extrusion deposition of ferrite samples with a binder and their subsequent heating with high-energy electron beam, were studied. Preliminary synthesis of ferrite powder was carried out by a solid-phase method using iron oxide and lithium carbonate. To prepare ferrite paste, a binder based on ethylcellulose and terpineol was used. The printed samples were sintered by heating with 1.4 MeV electron beam using an ELV-6 accelerator. Using X-ray phase analysis, it was established that the sintered ceramic consists mainly of an ordered α−Li0.5Fe2.5O4 phase and a certain amount of disordered β−Li0.5Fe2.5O4 phase. Ferrite ceramics are characterized by a relative density of 72.6–92.1 %, specific saturation magnetization of 63–65 emu/g, Curie temperature of 628–630 °C, electrical resistivity of 108–106 Ω cm, depending on the thickness of the printed sample (200 and 400 μm) and sintering temperature (1100 and 1200°С) Текстовый файл AM_Agreement |
| منشور في: |
2024
|
| الموضوعات: | |
| الوصول للمادة أونلاين: | https://doi.org/10.1016/j.ceramint.2024.10.114 |
| التنسيق: | الكتروني فصل الكتاب |
| KOHA link: | https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=676876 |
مواد مشابهة
Structural and Electromagnetic Properties of Lithium Ferrite Manufactured by Extrusion Printing
منشور في: (2024)
منشور في: (2024)
Effect of Gd content on microstructure and electromagnetic properties of lithium ferrite-based composite
منشور في: (2025)
منشور في: (2025)
Investigation of interactions in the mechanically activated a-Fe2O3/Li2CO3 reagents by thermal analysis
منشور في: (2023)
منشور في: (2023)
Influence of mechanical activation of initial reagents on synthesis of lithium ferrite
منشور في: (2012)
منشور في: (2012)
Электронно-пучковое спекание литиевой ферритовой керамики, изготовленной методом 3D печати
منشور في: (2024)
منشور في: (2024)
The influence of ZrO2 additive on sintering and microstructure of lithium and lithium-titanium-zinc ferrites
منشور في: (2018)
منشور في: (2018)
The Influence of Mechanical Processing of Initial Reagents on Structural and Electrical Properties of LiFeO2 Ceramics
منشور في: (2025)
منشور في: (2025)
Dilatometric analysis of sintering lithium-titanium-zinc ferrite with ZrO2 additive
منشور في: (2021)
منشور في: (2021)
Thermomagnetometric analysis of lithium ferrites
حسب: Astafyev A. L. Alexander Leonidovich
منشور في: (2019)
حسب: Astafyev A. L. Alexander Leonidovich
منشور في: (2019)
Effect of Mechanical Activation on the Reactivity of Reagents in the Preparation of Lithium Ferrites
حسب: Lysenko E. N. Elena Nikolaevna
منشور في: (2022)
حسب: Lysenko E. N. Elena Nikolaevna
منشور في: (2022)
Investigation of the Composition and Electromagnetic Properties of Lithium Ferrite LiFe5O8 Ceramics Synthesized from Ultradisperse Iron Oxide
منشور في: (2015)
منشور في: (2015)
Electromigration in lithium-titanium ferrite ceramics sintered in radiation-thermal mode
منشور في: (2021)
منشور في: (2021)
Thermal analysis of sintering Li–Ti–Zn ferrite from mechanically activated powders
منشور في: (2023)
منشور في: (2023)
Phase transformations in ferrites during radiation-thermal sintering
منشور في: (2020)
منشور في: (2020)
Analysis of the applicability of physical models to describe densification of lithium ferrite compacts during sintering in the field of intense electron beam
منشور في: (2020)
منشور في: (2020)
Temperature dependences of the initial permeability of lithium-titanium ferrites produced by solid-state sintering in thermal and radiation-thermal modes
منشور في: (2022)
منشور في: (2022)
LiF influence on spark plasma sintering and structure of transparent MgAl2O4 ceramics
منشور في: (2025)
منشور في: (2025)
Electrical and magnetic properties of ZrO2-doped lithium-titanium-zinc ferrite ceramics
منشور في: (2019)
منشور في: (2019)
Study of the initial magnetic permeability of LiTiZnMn ferrites obtained by liquid-phase sintering under radiation-thermal and thermal conditions
حسب: Surzhikov A. P. Anatoly Petrovich
منشور في: (2022)
حسب: Surzhikov A. P. Anatoly Petrovich
منشور في: (2022)
XRD Analysis of Ferrite Ceramics with Different Heat Treatment
منشور في: (2019)
منشور في: (2019)
Structure and properties of Li ferrite synthesized from Fe2O3–Li2CO3–Sm2O3 powders
منشور في: (2025)
منشور في: (2025)
Interaction of lithium-titanium ceramics with air during sintering
منشور في: (2007)
منشور في: (2007)
3D printing of polymer matrix composites for space: A review andpromises
حسب: Yurkina V. A. Varvara Alexandrovna
منشور في: (2019)
حسب: Yurkina V. A. Varvara Alexandrovna
منشور في: (2019)
Sintering and characterization of novel multilayered MgAl2O4/YAG, MgAl2O4/YSZ and YAG/YSZ ceramic-ceramic architectures for
photonic applications
منشور في: (2023)
منشور في: (2023)
Influence of solid-phase ferritization method on phase composition of lithium-zinc ferrites with various concentration of zinc
منشور في: (2012)
منشور في: (2012)
Solid-state synthesis of lithium-zinc ferrites by a high-energy electron beam heating
منشور في: (2012)
منشور في: (2012)
Analysis of the phase composition and homogeneity of ferrite lithium-substituted powders by the thermomagnetometry method
منشور في: (2013)
منشور في: (2013)
Fabrication and properties of novel multilayered Y3Al5O12/MgAl2O4 ceramics doped with rare-earth ions
منشور في: (2024)
منشور في: (2024)
Effect of ZrO2 Additive on the Morphology of Lithium Ferrite
حسب: Nikolaeva S. A. Svetlana Andreevna
منشور في: (2019)
حسب: Nikolaeva S. A. Svetlana Andreevna
منشور في: (2019)
Structural and magnetic properties of lithium-substituted ferrite ceramics sintered by continuous electron beam heating
منشور في: (2020)
منشور في: (2020)
Effect of Bismuth Oxide on the Structure, Electrical Resistance, and Magnetization of Lithium Zinc Ferrite
منشور في: (2024)
منشور في: (2024)
The influence of reagents ball milling on the lithium ferrite formation
منشور في: (2019)
منشور في: (2019)
Effect of sintering regimes on the microstructure and magnetic properties of LiTiZn ferrite ceramics
منشور في: (2018)
منشور في: (2018)
Fabrication of zirconia ceramics by sintering in a magnetic field
منشور في: (2021)
منشور في: (2021)
Исследование реологических свойств металло-керамических и керамических композитов на основе MAX-фазы Ti3SiC2
حسب: Копытов Г. С.
منشور في: (2025)
حسب: Копытов Г. С.
منشور في: (2025)
Investigation of electrical properties homogeneity of Li-Ti-Zn ferrite ceramics
منشور في: (2020)
منشور في: (2020)
Optimization of Energy Balance and Powertrain for Electric Mining Dump Trucks in Coal Mine Reclamation Operations
منشور في: (2025)
منشور في: (2025)
Rheological Characteristics of Highly Concentrated Silica Glass Suspensions for 3D Printing of Refractories
منشور في: (2024)
منشور في: (2024)
Formation of Microstructure of Lithium-Titanium Ferrite during its Synthesis in a 2.4 MeV Electron Beam
منشور في: (2020)
منشور في: (2020)
Study of the Radio-Wave Absorbing Properties of a Lithium-Zinc Ferrite Based Composite
منشور في: (2014)
منشور في: (2014)
مواد مشابهة
-
Structural and Electromagnetic Properties of Lithium Ferrite Manufactured by Extrusion Printing
منشور في: (2024) -
Effect of Gd content on microstructure and electromagnetic properties of lithium ferrite-based composite
منشور في: (2025) -
Investigation of interactions in the mechanically activated a-Fe2O3/Li2CO3 reagents by thermal analysis
منشور في: (2023) -
Influence of mechanical activation of initial reagents on synthesis of lithium ferrite
منشور في: (2012) -
Электронно-пучковое спекание литиевой ферритовой керамики, изготовленной методом 3D печати
منشور في: (2024)