Microstructure and Mechanical Properties of Ti–Al–Ta–N Coatings Alloyed with Si
| Parent link: | Russian Physics Journal Vol. 65, iss. 10.— 2023.— [P. 1762-1767] |
|---|---|
| Other Authors: | , , , , |
| Summary: | Title screen The structure and mechanical properties of magnetron-sputtered Ti–Al–Ta–N and Ti–Al–Ta–Si–N coatings were studied using x-ray diffraction, scanning electron microscopy, transmission electron microscopy, and nanoindentation. The chemical compositions of the coatings were Ti0.41Al0.49Ta0.10N and Ti0.36Al0.44Ta0.10Si0.10N. The x-ray diffraction investigation has revealed that both coatings had the B1-type FCC crystal structure. The microscopic studies showed that alloying of the Ti–Al–Ta–N coating with Si resulted in modification of their microstructure from pronounced columnar structure to predominantly fine-grain structure. The incorporation of Si was found to substantially enhance the hardness of the Ti–Al–Ta–Si– N coating compared with the Ti–Al–Ta–N one with simultaneous improvement of toughness. |
| Published: |
2023
|
| Subjects: | |
| Online Access: | https://doi.org/10.1007/s11182-023-02828-0 |
| Format: | Electronic Book Chapter |
| KOHA link: | https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=669330 |