Magnetron Sputtering Deposition of Intermetallic Coatings Using Tin and Niobium Plasma; Russian Physics Journal; Vol. 65, iss. 11
| Parent link: | Russian Physics Journal Vol. 65, iss. 11.— 2023.— [P. 2004-2009] |
|---|---|
| Autor corporatiu: | , |
| Altres autors: | , , , , |
| Sumari: | Title screen The paper studies the formation mechanisms of niobium (Nb) – tin (Sn) coatings during the magnetron sputtering deposition. The coatings are obtained both by layer-by-layer and simultaneous sputtering of Nb and Sn targets. The optimum operation mode is determined for the magnetron to provide the tin surface concentration of 19?26 at.%. The elemental composition and microstructure of the obtained coatings are studied in this paper. The structure and phase composition are investigated after 800°C annealing in a high-vacuum furnace. Research results indicate to the formation of the intermetallic compound triniobium tin. From the viewpoint of expected superconducting properties, the best results are obtained by a simultaneous use of two plasma sources. Режим доступа: по договору с организацией-держателем ресурса |
| Idioma: | anglès |
| Publicat: |
2023
|
| Matèries: | |
| Accés en línia: | https://doi.org/10.1007/s11182-023-02862-y |
| Format: | MixedMaterials Electrònic Capítol de llibre |
| KOHA link: | https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=669317 |
Ítems similars
Superconductive Nb3Sn Coatings Synthesized for Charged-Particle Accelerators Using Magnetron Sputtering; Russian Physics Journal; Vol. 65, iss. 11
Publicat: (2023)
Publicat: (2023)
A comparative study on high-temperature air oxidation of Cr-coated E110 zirconium alloy deposited by magnetron sputtering and electroplating; Surface and Coatings Technology; Vol. 433
Publicat: (2022)
Publicat: (2022)
RF magnetron-sputtered coatings deposited from biphasic calcium phosphate targets for biomedical implant applications; Bioactive Materials; Vol. 2, iss. 3
Publicat: (2017)
Publicat: (2017)
Effects of annealing in vacuum on the microstructure of silicon-containing calcium phosphate films deposited on a ZrNb alloy by radio-frequency magnetron sputtering; Vacuum; Vol. 212
Publicat: (2023)
Publicat: (2023)
Glancing Angle Deposition of Zn-Doped Calcium Phosphate Coatings by RF Magnetron Sputtering; Coatings; Vol. 9, iss. 4
Publicat: (2019)
Publicat: (2019)
The role of thermal processes and target evaporation in formation of self-sputtering mode for copper magnetron sputtering; Vacuum; Vol. 152
Publicat: (2018)
Publicat: (2018)
Deposition of Superconducting Nb3Sn Coatings Using Multiple Magnetron Sputtering Techniques; Metals; Vol. 13 - iss. 10
Publicat: (2023)
Publicat: (2023)
Metal Coatings Deposition Using Hot Target Magnetrons; Surface Modification of Materials by Ion Beams (SMMIB-2019)
Publicat: (2019)
Publicat: (2019)
Physical principles of radio-frequency magnetron sputter deposition of calcium-phosphate-based coating with tailored properties; Surface and Coatings Technology; Vol. 413
Publicat: (2021)
Publicat: (2021)
Hot target magnetron sputtering enhanced by RF-ICP source for CrNx coatings deposition; Vacuum; Vol. 191
Publicat: (2021)
Publicat: (2021)
Magnetron deposition of chromium nitride coatings using a hot chromium target: Influence of magnetron power on the deposition rate and elemental composition; Surface and Coatings Technology; Vol. 433
Publicat: (2022)
Publicat: (2022)
Porous CaP Coatings Formed by Combination of Plasma Electrolytic Oxidation and RF-Magnetron Sputtering; Coatings; Vol. 10, iss. 11
Publicat: (2020)
Publicat: (2020)
The preparation of calcium phosphate coatings on titanium and nickel-titanium by rf-magnetron-sputtered deposition: Composition, structure and micromechanical properties; Surface and Coatings Technology; Vol. 202, iss. 16
Publicat: (2008)
Publicat: (2008)
Tailoring the Surface Morphology and the Crystallinity State of Cu- and Zn-Substituted Hydroxyapatites on Ti and Mg-Based Alloys; Materials; Vol. 13, iss. 19
Publicat: (2020)
Publicat: (2020)
Nickel and Chromium Deposition by Hot Target Magnetron Sputtering; Surface Modification of Materials by Ion Beams (SMMIB-2019)
Publicat: (2019)
Publicat: (2019)
Controlling the Properties of Metal Films Deposited Using Magnetron Sputtering Systems with Evaporative Targets; Surface Modification of Materials by Ion Beams (SMMIB-2019)
Publicat: (2019)
Publicat: (2019)
Chromium coatings deposited by cooled and hot target magnetron sputtering for accident tolerant nuclear fuel claddings; Surface and Coatings Technology; Vol. 389
Publicat: (2020)
Publicat: (2020)
Magnetron Deposition of Cr Coatings with RF-ICP Assistance; Coatings; Vol. 12, iss. 10
Publicat: (2022)
Publicat: (2022)
Influence of coating parameters on oxidation behavior of Cr-coated zirconium alloy for accident tolerant fuel claddings; Corrosion Science; Vol. 203
Publicat: (2022)
Publicat: (2022)
Application of high-frequency magnetron sputtering to deposit thin calcium-phosphate biocompatible coatings on a titanium surface; Journal of Surface Investigation. X-ray, Synchrotron and Neutron Techniques; Vol. 1, iss. 6
Publicat: (2007)
Publicat: (2007)
Magnetron Deposition of Oxide Films in the Metallic Mode Enhanced by Radio-Frequency Inductively Coupled Plasma Source; Journal of Surface Investigation. X-ray, Synchrotron and Neutron Techniques; Vol. 17, iss. 5
per: Sidelev D. V. Dmitry Vladimirovich
Publicat: (2023)
per: Sidelev D. V. Dmitry Vladimirovich
Publicat: (2023)
Polyether Ether Ketone Coated with Ultra-Thin Films of Titanium Oxide and Zirconium Oxide Fabricated by DC Magnetron Sputtering for Biomedical Application; Materials; Vol. 15, iss. 22
Publicat: (2022)
Publicat: (2022)
Chromium films deposition by hot target high power pulsed magnetron sputtering: Deposition conditions and film properties; Surface and Coatings Technology; Vol. 375
Publicat: (2019)
Publicat: (2019)
Oxidation and Mechanical Behavior of Cr-Coated Laser Beam Welds Made from E110 Zirconium Alloy; Coatings; Vol. 12, iss. 11
Publicat: (2022)
Publicat: (2022)
Influence of the substrate bias on the stoichiometry and structure of RF-magnetron sputter-deposited silver-containing calcium phosphate coatings; Materialwissenschaft und Werkstofftechnik; Vol. 44, iss. 2-3
Publicat: (2013)
Publicat: (2013)
Effect of high-temperature annealing parameters on the structure and properties of YAG:Ce phosphor coatings deposited via mid-frequency magnetron sputtering; Optical Materials; Vol. 174
Publicat: (2026)
Publicat: (2026)
Effect of nitrogen content on structural and mechanical properties of AlTiZrTaHf(-N) high entropy films deposited by reactive magnetron sputtering; Surface and Coatings Technology; Vol. 432
Publicat: (2022)
Publicat: (2022)
Ab initio calculations and a scratch test study of RF-magnetron sputter deposited hydroxyapatite and silicon-containing hydroxyapatite coatings; Surfaces and Interfaces; Vol. 21
Publicat: (2020)
Publicat: (2020)
Magnetron deposition of copper oxide coatings in a metallic mode enhanced by RF-ICP source: A role of substrate biasing; Vacuum; Vol. 211
per: Sidelev D. V. Dmitry Vladimirovich
Publicat: (2023)
per: Sidelev D. V. Dmitry Vladimirovich
Publicat: (2023)
Surface modification of PLLA scaffolds via reactive magnetron sputtering in mixtures of nitrogen with noble gases for higher cell adhesion and proliferation; Colloids and Surfaces A: Physicochemical and Engineering Aspects; Vol. 649
Publicat: (2022)
Publicat: (2022)
Protective Cr Coatings with ZrO2/Cr Multilayers for Zirconium Fuel Claddings; Coatings; Vol. 12, iss. 10
Publicat: (2022)
Publicat: (2022)
Surface Modification of Electrospun Bioresorbable and Biostable Scaffolds by Pulsed DC Magnetron Sputtering of Titanium for Gingival Tissue Regeneration; Polymers; Vol. 14, iss. 22
Publicat: (2022)
Publicat: (2022)
Deposition temperature effect on sputtered hydroxyapatite coatings prepared on AZ31B alloy substrate; Ceramics International; Vol. 48, iss. 8
Publicat: (2022)
Publicat: (2022)
Thin calcium-phosphate coatings produced by RF Magnetron sputtering and prospects for their use in biomedical engineering; Biomedical Engineering; Vol. 42, iss. 3
Publicat: (2008)
Publicat: (2008)
Thermal stability and oxidation resistance of ZrSiN nanocomposite and ZrN/SiNx multilayered coatings: A comparative study; Surface and Coatings Technology; Vol. 332
Publicat: (2017)
Publicat: (2017)
RF-magnetron sputter deposited hydroxyapatite-based composite & multilayer coatings: A systematic review from mechanical, corrosion, and biological points of view; Ceramics International; Vol. 47, iss. 3
Publicat: (2021)
Publicat: (2021)
Biocompatible nanostructured coatings based on calcium phosphates prepared by means of rf-magnetron sputtering deposition; The 7th International Forum on Strategic Technology (IFOST-2012), September 18-21, 2012, Tomsk
Publicat: (2012)
Publicat: (2012)
Технология формирования мишени для ВЧ магнетронного распыления из биметаллических частиц CU-W; Инновационные технологии в машиностроении
per: Просолов К. А.
Publicat: (2022)
per: Просолов К. А.
Publicat: (2022)
Effect of Intermediate Ion Cleaning of the Titanium Target on the Structure of Bioresorbable PLLA Scaffolds under Coating Deposition by DC Reactive Magnetron Sputtering; Inorganic Materials: Applied Research; Vol. 11, iss. 3
Publicat: (2020)
Publicat: (2020)
The properties of Cu films deposited by high rate magnetron sputtering from a liquid target; Vacuum; Vol. 169
Publicat: (2019)
Publicat: (2019)