Исследование влияния внешних факторов на полимерные материалы оболочек гибких кабелей, применяемых в системах питания транспортного и горного электротехнического оборудования

Bibliographic Details
Parent link:Науковедение: интернет-журнал.— , 2009-
Т. 9, № 2.— 2017.— [9 с.]
Main Author: Леонов А. П. Андрей Петрович
Corporate Author: Национальный исследовательский Томский политехнический университет
Other Authors: Матери Т. М. Татьяна Михайловна
Summary:Заглавие с экрана
В работе проведена оценка стойкости изоляционных материалов, применяемых при производстве гибких кабелей (фторопласт, поливинилхлоридный пластикат, этиленпропиленовая резина) к действию комплекса факторов, характерных для режимов эксплуатации транспортного и горного электрооборудования: механические нагрузки, пониженные температуры, агрессивная среда низкомолекулярных углеводородов. Актуальность работы определяется необходимостью повышения и обеспечения надежности систем электроснабжения транспортного и горного электротехнического оборудования, а также расширения соответствующей номенклатуры кабельных изделий. Отмечено: основным элементом конструкции гибких кабелей, определяющим его надежность и безаварийное функционирование, является оболочка. В качестве критерия стойкости оболочки к эксплуатационным факторам принято изменение предела прочности на разрыв и относительного удлинения, а также стойкость к монтажному изгибу. Показано, что воздействие пониженных температур практически не влияет на изменение физико-механических характеристик исследованных материалов. Изменение предела прочности образцов из фторопласта составило 4,9%, поливинилхлоридного пластиката (ПВХ) около 2,0%, этиленпропиленовой резины 5,8%.
The resistance to the effect of combined factors typical for transport and mining electrical equipment operational mode: mechanical stresses, low temperatures, and aggressive hydrocarbon liquid media on insulating materials using for the flexible cables production (PTFE, PVC compound, ethylene propylene rubber) is evaluated in this paper. The relevance of the work is determined by the need to improve the reliability of transport and mining equipment electrical power system, and to expand the range of required cable products. It was observed that reliable and failurefree operation mainly depend on flexible cable sheath. The estimation of the tensile strength and relative elongation changing, as well as resistance to mounting bending is adopted as criterion. It is shown that low temperature exposure does not affect the change of physical and mechanical characteristics of studied materials. The samples tensile strength changing equal to 4,9% for PTFE, about 2,0% for PVC compound (PVC), and 5,8% for EPDM is observed. The samples relative elongation after being stored at low temperatures changes slightly and does not exceed 15%: for EPDM it is equal to 9%, for PVC compound - 14,9%, for PTFE - 1,6%. Experimental results show that PTFE is the most resistant to the diesel fuel and transformer oil effect. It allows to select these materials as promising for further testing and application in flexible cables operating at low temperatures. It is shown that PTFE is proved to be a stable material to the diesel fuel and transformer oil effect. The physical and mechanical properties changing haven’t exceeded 10%. PTFE high resistance to the effect of hydrocarbon liquids is due to high value of the "carbon-fluorine" binding energy, the dissolving features of contacting materials with regard to their polarity.
Published: 2017
Series:Технические науки 05.02.00 машиностроение и машиноведение
Subjects:
Online Access:http://naukovedenie.ru/PDF/19TVN217.pdf
Format: Electronic Book Chapter
KOHA link:https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=655127