Effects of transient thermal shock loadings on the structure of zirconia ceramics; IOP Conference Series: Materials Science and Engineering; Vol. 156 : Materials and Technologies of New Generations in Modern Materials Science

Effects of transient thermal shock loadings on the structure of zirconia ceramics; IOP Conference Series: Materials Science and Engineering; Vol. 156 : Materials and Technologies of New Generations in Modern Materials Science

Bibliographic Details
Parent link:	IOP Conference Series: Materials Science and Engineering Vol. 156 : Materials and Technologies of New Generations in Modern Materials Science.— 2016.— [012029, 5 p.]
Main Author:	Derkach E. A.
Corporate Author:	Национальный исследовательский Томский политехнический университет (ТПУ) Институт физики высоких технологий (ИФВТ) Кафедра материаловедения в машиностроении (ММС)
Other Authors:	Buyakova S. P. Svetlana Petrovna, Kulkov S. N. Sergey Nikolaevich
Summary:	Title screen In this paper the influence of thermal shock loadings on the phase composition and microstructure of ZrO[2](Y[2]O[3]) and ZrO[2](MgO) ceramics was studied. It was found that thermal shock strains were no effect on phase composition of ZrO[2](Y[2]O[3]) ceramics. Reducing the concentration of high-temperature tetragonal t-ZrO[2] and cubic c-ZrO[2] modifications and rising the content of low-temperature monoclinic m-ZrO[2] crystal system with increasing the number of thermal shock strains were observed. The values of region coherent X-ray scattering of ZrO[2](Y[2]O[3]) ceramics didn't changed, while the crystallite size of ZrO[2](MgO) ceramics decreased. The formation of block structure in all studied ceramics was observed, the sizes of the blocks formed in the ZrO[2](Y[2]O[3]) and ZrO[2](MgO) ceramics were slightly different. The formation of the blocks in ZrO[2](Y[2]O[3]) ceramics occurred on the grain boundaries, while the crystallites in ZrO[2](MgO) ceramics were crushed due to phase transformation.
Language:	English
Published:	2016
Subjects:	электронный ресурс труды учёных ТПУ тепловые нагрузки ударные нагрузки циркониевая керамика микроструктуры фазовые превращения фазовые составы рентгеновское рассеяние
Online Access:	http://dx.doi.org/10.1088/1757-899X/156/1/012029 http://earchive.tpu.ru/handle/11683/36539
Format:	Electronic Book Chapter
KOHA link:	https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=651462

Similar Items

Tribological Properties and Microstructure of Gradient Nanocomposite Coatings on the Basis of Ti-Al-Cr-B-N; Advanced Materials Research; Vol. 1085 : Prospects of Fundamental Sciences Development (PFSD-2014)
Published: (2015)

Integrated microelectromechanical gyroscope under shock loads; IOP Conference Series: Materials Science and Engineering; Vol. 289 : Modern Technologies for Non-Destructive Testing
by: Nesterenko T. G. Tamara Georgievna
Published: (2018)

Fabrication of Paper-Derived Ti3SiC2-Based Materials by Spark Plasma Sintering; Advanced Engineering Materials; Vol. 22, iss. 6
Published: (2020)

Sintering of zirconia ceramics using microwave and spark heating techniques; IOP Conference Series: Materials Science and Engineering; Vol. 110 : Radiation-Thermal Effects and Processes in Inorganic Materials (RTEP2015)
Published: (2016)

Deformation and fracture of a layered VT6-based material under shock loading; AIP Conference Proceedings; Vol. 1623 : International Conference on Physical Mesomechanics of Multilevel Systems 2014, Tomsk, Russia, 3–5 September 2014
Published: (2014)

Effect of High Intensity Pulsed Ion Beam of Carbon on Subsurface Layers of Zirconia Ceramics; Advanced Materials Research; Vol. 1085 : Prospects of Fundamental Sciences Development (PFSD-2014)
Published: (2015)

Влияние микроструктуры и фазового состава на механические свойства композита ZrO[2]-MgO с бимодальной поровой структурой; Перспективы развития фундаментальных наук; Т. 1 : Физика
by: Буяков А. С. Алесь Сергеевич
Published: (2018)

Research of the Destruction of Ice Under Shock and Explosive Loads: chap.; Vol. 141 : Multiscale Solid Mechanics
by: Orlov M. Yu. Maksim Yurjevich
Published: (2021)

Influence of Technological Factors on Structure and Properties of Alumina-Zirconia Ceramics; Advanced Materials Research; Vol. 1040 : High Technology: Research and Applications 2014 (HTRA 2014)
Published: (2014)

Deformation characteristics of the near-surface layers of zirconia ceramics implanted with aluminum ions; IOP Conference Series: Materials Science and Engineering; Vol. 93: Modern Technique and Technologies (MTT'2015)
Published: (2015)

Two-Step Sintering of Zirconia Ceramics by Intense High-Energy Electron Beam; Materials Science Forum; Vol. 970 : Modern Problems in Materials Processing, Manufacturing, Testing and Quality Assurance II
Published: (2019)

Influence of temperature and glass composition on aluminum nitride contact angle; IOP Conference Series: Materials Science and Engineering; Vol. 156 : Materials and Technologies of New Generations in Modern Materials Science
by: Tarnovskiy R.
Published: (2016)

Investigation of the Strain Inhomogeneity of ZrO[2]-(Y[2]O[3]) during Brazilian Test; AIP Conference Proceedings; Vol. 2167 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2019 (AMHS'19)
Published: (2019)

Zen law and features of liquidus-solidus curves in binary state diagrams based on elements VIIIA and IB of the periodic table; IOP Conference Series: Materials Science and Engineering; Vol. 156 : Materials and Technologies of New Generations in Modern Materials Science
Published: (2016)

Stresses in the material with multilayered coating under impulse thermal loading; IOP Conference Series: Materials Science and Engineering; Vol. 124 : Mechanical Engineering, Automation and Control Systems (MEACS2015)
by: Shanin S. A. Sergei Aleksandrovich
Published: (2016)

Influence of Ion Treatment Modes on the Physical and Mechanical Properties of Zirconia Ceramics; Inorganic Materials: Applied Research; Vol. 12, iss. 2
by: Gyngazov (Ghyngazov) S. A. Sergey Anatolievich
Published: (2021)

Shock Waves in Condensed Matter: International Conference, Saint-Petersburg, 1-6 September 2002
Published: (St. Petersburg, 2002)

Effect of grinding and subsequent thermal annealing on phase composition of subsurface layers of zirconia ceramics; Ceramics International; Vol. 44, iss. 2
by: Frangulyan (Franguljyan) Т. S. Tamara Semenovna
Published: (2018)

Mechanical state assessment using lamb wave technique in static tensile tests; IOP Conference Series: Materials Science and Engineering; Vol. 156 : Materials and Technologies of New Generations in Modern Materials Science
Published: (2016)

Изучение фазового состава алюмокобальтмолибденового окисного катализатора гидроочистки; Нефтепереработка и нефтехимия; № 5
Published: (1977)

Фазовые превращения в многослойных покрытиях на основе Zr-Y-O; Перспективные материалы с иерархической структурой для новых технологий и надежных конструкций
Published: (2015)

Modification of Structural Phase State and Mechanical Properties of Poly-Grained Titanium Alloy Implanted by Aluminum Ions; IOP Conference Series: Materials Science and Engineering; Vol. 112 : Fundamental Aspects of Rare-earth Elements Mining and Separation and Modern Materials Engineering (REES-2015)
Published: (2016)

Formation of Pore Structure in Zirconia-Alumina Ceramics; Journal of Silicate Based and Composite Materials; Vol. 70, No. 1
Published: (2018)

Mechanical Properties of Zirconium Ceramics with Hierarchical Porous Structure; IOP Conference Series: Materials Science and Engineering; Vol. 140 : Interdisciplinary Problems in Additive Technologies
by: Kulkov S. N. Sergey Nikolaevich
Published: (2016)

Developing porous ceramics on the base of zirconia oxide with thin and permeable pores by crystallization of organic additive method; IOP Conference Series: Materials Science and Engineering; Vol. 156 : Materials and Technologies of New Generations in Modern Materials Science
by: Kamyshnaya K. S. Kseniya Sergeevna
Published: (2016)

Deformation and Damage Accumulation in a Ceramic Composite under Dynamic Loading; IOP Conference Series: Materials Science and Engineering; Vol. 112 : Fundamental Aspects of Rare-earth Elements Mining and Separation and Modern Materials Engineering (REES-2015)
Published: (2016)

Influence of ion-beam treatment on structure and defor-mation resistance of 12Cr1MoV steel under static, cyclic and dynamic loading; IOP Conference Series: Materials Science and Engineering; Vol. 93: Modern Technique and Technologies (MTT'2015)
Published: (2015)

Dissemination of Weak Waves in Granular Materials Under Short-Term Impulse Loads; IOP Conference Series: Materials Science and Engineering; Vol. 127 : Urgent Problems of Modern Mechanical Engineering
Published: (2016)

Электронно-микроскопическое исследование фазовых превращений в наноструктурных покрытиях на основе Zr-Y-O; Перспективы развития фундаментальных наук; Т. 1 : Физика
by: Бардова А. Е.
Published: (2016)

Research of the condensed beam stop dynamics under loading with a high-power ion beam of power density >= 10{10}W/cm{2}; Физико-технические проблемы в науке, промышленности и медицине
by: Daneykin (Daneikin) Yu. V. Yuri Viktorovich
Published: (2016)

Non-Invasive Tissue Injury Monitoring Using Bioimpedance Spectroscopy; Advanced Materials Research : Radiation and nuclear techniques in material science; Vol. 1084 : Physical-Technical Problems of Nuclear Science, Energy Generation, and Power Industry (PTPAI -2014)
Published: (2015)

Effect of additives on sintering of zirconia ceramics; Journal of Thermal Analysis and Calorimetry; Vol. 134, iss. 1
by: Gyngazov (Ghyngazov) S. A. Sergey Anatolievich
Published: (2018)

Nanostructuring and Physical Properties of Metal-Ceramic Composites With a Different Content the Ceramic Components; IOP Conference Series: Materials Science and Engineering; Vol. 125 : Materials Treatment: Current Problems and Solutions
Published: (2016)

Effect of the structural and phase state on the deformation behavior and mechanical properties of the ultrafine-grained titanium alloy (Ti-Al-V-Мо) at temperatures in the range of 293-973 K; Materials Science and Engineering: A; Vol. 800
Published: (2021)

Структура и свойства псевдосплавов Al-ZrW[2]O[8]; Современные технологии и материалы новых поколений
by: Шадрин В. С.
Published: (2017)

Influence of High-Intensity Zr Ion-Beam Treatment on Deformation and Fracture of 12Cr1MoV Steel under Static, Cyclic and Dynamic Loadings; Key Engineering Materials; Vol. 712 : Advanced Materials for Technical and Medical Purpose (AMTMP 2016)
Published: (2016)

The role of notch tip shape and radius on deformation mechanisms of 12Cr1MoV steel under impact loading. Part 2. Influence of strain localization on fracture and numeric simulations; Fatigue and Fracture of Engineering Materials and Structures; Vol. 40, iss. 11
Published: (2017)

Description and development of the means of a model experiment for load balancing in distributed computing systems; IOP Conference Series: Materials Science and Engineering; Vol. 135 : Issues of Physics and Technology in Science, Industry and Medicine
Published: (2016)

Non-Destructive Testing of Honeycomb CFRP Panel by Means of Shearography; AIP Conference Proceedings; Vol. 2051 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2018 (AMHS’18)
by: Burkov M. V. Mikhail Vladimirovich
Published: (2018)

The Load Capability Dependence on Characteristics of Driven Disks in a Lockup Assembly of an Overload Hydrodynamic Coupling; IOP Conference Series: Materials Science and Engineering; Vol. 127 : Urgent Problems of Modern Mechanical Engineering
by: Khoreshok A. A. Aleksey Alekseevich
Published: (2016)