Modeling the critical conditions for puffing and microexplosion of unstable emulsified fuel droplets; Physics of Fluids; Vol. 38, iss. 8

Bibliografske podrobnosti
Parent link:Physics of Fluids.— .— New York: AIP Publishing
Vol. 38, iss. 8.— 2026.— Article number 083301, 22 p.
Glavni avtor: Antonov D. V. Dmitry Vladimirovich
Korporativna značnica: Национальный исследовательский Томский политехнический университет Исследовательская школа физики высокоэнергетических процессов
Drugi avtorji: Strizhak P. A. Pavel Alexandrovich
Izvleček:Title screen
Intense heating of emulsified fuel droplets injected into combustion chambers of aviation engines leads to their puffing and microexplosions. In this study, we develop a new heat and mass transfer model, accounting for phase separation in emulsified fuel droplets and the formation of a core–film structure, to predict critical puffing/microexplosion conditions. The dynamics of phase separation in emulsion droplets containing various surfactants is investigated using a transient phase-field model. The problem considers coupled heating, evaporation, and phase separation of an emulsified fuel droplet in a gas–air environment. Numerical simulations are performed in software COMSOL Multiphysics using the heat transfer in solids and fluids, laminar flow, deformed geometry, and phase field modules, supplemented by user-defined functions. The behavior of unstable emulsion droplets is compared with that of two-liquid droplets up to critical puffing/microexplosion conditions. Parametric calculations cover droplet sizes from 0.01 to 1 mm, ambient gas temperatures from 500 to 1100 K, dispersed phase (water) concentrations up to 10 vol. %, and mean dispersed-phase sizes ranging from 1 to 100 μm. The results show that phase separation accounts for no more than 50% of the total puffing/microexplosion delay time. Additionally, the rate of temperature rise in emulsion droplets is found to be much lower than in immiscible two-liquid droplets. The influence of phase separation dynamics on critical droplet breakup conditions is analyzed for a wide range of initial and threshold parameters
AM_Agreement
Jezik:angleščina
Izdano: 2026
Teme:
Online dostop:https://doi.org/10.1063/5.0336839
Format: Elektronski Book Chapter
KOHA link:https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=688971
Opis
Izvleček:Title screen
Intense heating of emulsified fuel droplets injected into combustion chambers of aviation engines leads to their puffing and microexplosions. In this study, we develop a new heat and mass transfer model, accounting for phase separation in emulsified fuel droplets and the formation of a core–film structure, to predict critical puffing/microexplosion conditions. The dynamics of phase separation in emulsion droplets containing various surfactants is investigated using a transient phase-field model. The problem considers coupled heating, evaporation, and phase separation of an emulsified fuel droplet in a gas–air environment. Numerical simulations are performed in software COMSOL Multiphysics using the heat transfer in solids and fluids, laminar flow, deformed geometry, and phase field modules, supplemented by user-defined functions. The behavior of unstable emulsion droplets is compared with that of two-liquid droplets up to critical puffing/microexplosion conditions. Parametric calculations cover droplet sizes from 0.01 to 1 mm, ambient gas temperatures from 500 to 1100 K, dispersed phase (water) concentrations up to 10 vol. %, and mean dispersed-phase sizes ranging from 1 to 100 μm. The results show that phase separation accounts for no more than 50% of the total puffing/microexplosion delay time. Additionally, the rate of temperature rise in emulsion droplets is found to be much lower than in immiscible two-liquid droplets. The influence of phase separation dynamics on critical droplet breakup conditions is analyzed for a wide range of initial and threshold parameters
AM_Agreement
DOI:10.1063/5.0336839