Influence of Manufacturing Pressure on Properties of Sawdust–Lignite Pellets; Coke and Chemistry; Vol. 68, iss. 4

Influence of Manufacturing Pressure on Properties of Sawdust–Lignite Pellets; Coke and Chemistry; Vol. 68, iss. 4

Bibliographic Details
Parent link:	Coke and Chemistry=Кокс и химия.— .— New York: Springer Science+Business Media LLC Vol. 68, iss. 4.— 2025.— P. 374-381
Main Author:	Dorokhov V. V. Vadim Valerjevich
Other Authors:	Nyashina G. S. Galina Sergeevna, Shvedov D. K. Denis Konstantinovich
Summary:	Title screen The influence of the manufacturing pressure and the composition of pellets based on sawdust and assorted wastes and low-grade fuels on their density and mechanical characteristics (impact strength, hardness, resistance to vibrational loads) is studied experimentally. The specific additives employed are lignite, straw, and cardboard; in each case, 30 wt % of this component is added. With increase in manufacturing pressure and the use of those additives, the sample density may be increased from 2 to 8%. The pellet composition has a greater influence than the manufacturing pressure on the pellets’ characteristics. Adding cardboard increases the impact strength by 0.3–2.6%. Likewise, at fixed manufacturing pressure, the hardness increases by a factor of 1.5–2.9 on adding cardboard or lignite. The best resistance to vibrational loads is observed for sawdust pellets with no additive. The experiments show that 400 MPa is the optimal manufacturing pressure in terms of density, impact strength, hardness, and resistance to vibrational loads. The experimental results may be used in developing technologies for the production and combustion of pelletized fuels consisting of biomass and industrial waste Текстовый файл AM_Agreement
Language:	English
Published:	2025
Subjects:	pellets biomass industrial waste lignite properties performance manufacturing pressure электронный ресурс труды учёных ТПУ
Online Access:	https://doi.org/10.3103/S1068364X25600538 Статья на русском языке
Format:	Electronic Book Chapter
KOHA link:	https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=685875

Similar Items

Combustion and mechanical properties of pellets from biomass and industrial waste; Renewable Energy; Vol. 228
Published: (2024)

Physical characteristics and combustion behavior of pellets from sawdust and refuse-derived fuel; Fuel; Vol. 377
Published: (2024)

Influence of Binders on the Properties of Pellets Based on Wood Waste; Coke and Chemistry; Vol. 67, iss. 2
Published: (2024)

Wood pellets with waste: energy, environmental and mechanical aspects; Renewable Energy; Vol. 250
Published: (2025)

Effects of the type and proportion of a binder on the quality and combustion of fuel pellets; Biomass and Bioenergy; Vol. 199
Published: (2025)

Impact of oil additives on the physical and combustion characteristics of pellets from biomass and cardboard; Biomass and Bioenergy; Vol. 213
Published: (2026)

Thermal Analysis of the Combustion of Lignite–Biomass Mixtures; Coke and Chemistry; Vol. 66, iss. 4
by: Zhuykov A. V. Andrey Vladimirovich
Published: (2023)

Combustion stages of waste-derived blends burned as pellets, layers, and droplets of slurry; Energy; Vol. 251
Published: (2022)

Additives to Coal-Based Fuel Pellets for the Intensification of Combustion and Reduction in Anthropogenic Gas Emissions; Applied Sciences; Vol. 10, iss. 19
Published: (2020)

Influence of the Heating Rate on the Activation of Coal and Lignite Oxidation by Copper Nitrate; Coke and Chemistry; Vol. 63, iss. 8
Published: (2020)

Influence of Cu(NO3)2 Activator and Gas Composition on the Thermal Decomposition of Coal and Lignite; Coke and Chemistry; Vol. 63, iss. 3
Published: (2020)

Microwave Pyrolysis of Biomass in Steam; Coke and Chemistry; Vol. 65, iss. 10
by: Kurgankina M. A. Margarita Aleksandrovna
Published: (2022)

Combustion and emission behavior of different waste fuel blends in a laboratory furnace; Fuel; Vol. 285
Published: (2021)

Ignition and Emission Characteristics of Waste Tires Pyrolysis Char Co-Combustion with Peat and Sawdust; Energies; Vol. 16, iss. 10
Published: (2023)

Ash Composition in the Combustion of Promising Slurry Fuels; Coke and Chemistry; Vol. 63, iss. 3
Published: (2020)

Customs aspects of increase of competitiveness of the Russian Federation; Journal of Economics and Social Sciences; № 5
by: Apolonskaya K. V.
Published: (2014)

Allothermal gasification of peat and lignite by a focused light flow; Applied Sciences; Vol. 10, iss. 8
Published: (2020)

Manufacture of desired end products by means of fine treatment of coal tar resin; Bulletin of the Tomsk Polytechnic University; Vol. 310, № 2
Published: (2007)

Characteristics of spraying and ignition of coal-water fuels based on lignite and liquid pyrolysis products of wood waste; Energy; Vol. 257
by: Gvozdyakov D. V. Dmitry Vasilievich
Published: (2022)

Laminated Object Manufacturing of in-situ synthesized MAX-phase composites; Ceramics International; Vol. 43, iss. 12
Published: (2017)

Benefits of Slurry Fuels Based on Industrial Wastes; Coke and Chemistry; Vol. 62, iss. 9
Published: (2019)

Research of alternative feedstock application ways for pyrolysis; Recent Achievements and Prospects of Innovations and Technologies; Iss. 3 : Proceedings of the XIII All-Russian Research-to-Practice Conference of Students, Postgraduates and Young Scientists, Kerch, April 22, 2024
by: Alina A. V. Anna Vladimirovna
Published: (2024)

Comparative Investment Analysis of Industries Development in Russia and Germany; Education Reform and Modern Management (ERMM2015)
Published: (2015)

Influence of anisotropy properties and structural inhomogeneity on elasticity and fracture of titanium alloys produced by electron-beam melting; International Journal of Advanced Manufacturing Technology; Vol. 135
Published: (2025)

Conditions and characteristics of mixed fuel granules ignition based on coal and finely dispersed wood; Energy; Vol. 194
Published: (2020)

Microstructural Transformation and Enhanced Strength of Wire-Feed Electron-Beam Additive Manufactured Ti–6Al–4V Alloy Induced by High-Pressure Torsion; Advanced Engineering Materials; Vol. 26, iss. 4
Published: (2024)

Thermal analyses of uniformly heated fuel pin cell, inverted cell, and dual surface cooled cell geometries using comsol multi-physics; Научная инициатива иностранных студентов и аспирантов
by: Odii Ch. J. Christopher Joseph
Published: (2025)

Проблема использования отходов лакокрасочных материалов и их утилизация; Известия Томского политехнического университета [Известия ТПУ]. Инжиниринг георесурсов; Т. 331, № 9
Published: (2020)

Ignition and Combustion of Mixed Fuels Based on Coal and Wood under Different Conditions of Thermal Influence; Solid Fuel Chemistry; Vol. 58, iss. 1
Published: (2024)

Energy and environmental characteristics of coal and biocomponents co-combustion; Energy; Vol. 340
Published: (2025)

Applied aspects of nitrogen fixation by superfine powders (SFP) combustion in air phenomenon using; Modern Techniques and Technology (MTT' 2000)
Published: (2000)

Justification of the Energy Use of Cedar Husk Waste as an Environmentally Friendly Additive for Co-Combustion with Coal; Energies; Vol. 14, iss. 21
Published: (2021)

Thermal Analysis of the Combustion Processes of Brown Coal, Pine Sawdust, Cardboard, and Their Mixtures; Solid Fuel Chemistry; Vol. 56, iss. 4
by: Zhuykov A. V. Andrey Vladimirovich
Published: (2022)

Теплотехнические характеристики углей месторождения Шивэ-Овоо Монголии как энергетического топлива; Известия Томского политехнического университета [Известия ТПУ]; Т. 324, № 4 : Техника и технологии в энергетике
Published: (2014)

Intensification of the Oxidation of Lignite and Coal by an Activating Additive of Fe(NO3)2; Solid Fuel Chemistry; Vol. 53, iss. 5
Published: (2019)

Effective incineration of fuel-waste slurries from several related industries; Environmental Research; Vol. 176
Published: (2019)

Structural and Electromagnetic Properties of Lithium Ferrite Manufactured by Extrusion Printing; Russian Physics Journal; Vol. 67, iss. 7
Published: (2024)

Bio-graphene activated carbon of sago waste as a potential catalyst for crude coconut oil combustion: An experimental and quantum mechanics based study; Results in Chemistry; Vol. 15
by: H. Y. Hendry
Published: (2025)

Ignition, Combustion, and Mechanical Properties of Briquettes from Coal Slime and Oil Waste, Biomass, Peat and Starch; Waste and Biomass Valorization; Vol. 14, iss. 2
Published: (2023)

Labor Indicators and Manufacturing Companies Ownership Patterns in Russia and its Regions: Results of Quantitative Analysis; Oeconomia Copernicana; Vol. 9, No. 2
Published: (2018)