An Automated Optical Strain Measurement System for Estimating Polymer Degradation under Fatigue Testing; Sensors; Vol. 22, iss. 16
| Parent link: | Sensors.— .— Basel: MDPI AG Vol. 22, iss. 16.— 2022.— Article number 6034, 20 p. |
|---|---|
| Andre forfattere: | Bogdanov A. A. Aleksey Alekseevich, Panin A. V. Alexey Viktorovich, Lyubutin P. S. Pavel Stepanovich, Eremin A. V. Alexandr Vyacheslavovich, Buslovich D. G. Dmitry Gennadjevich, Byakov A. V. Anton Viktorovich |
| Summary: | Title screen Background: this study deals with design of an automated laboratory facility based on a servo-hydraulic testing machine for estimating parameters of mechanical hysteresis loops by means of the digital image correlation (DIC) method. (2) Methods: the paper presents a description of the testing facility, describes the grounds for calculating the elastic modulus, the offset yield strength (OYS) and the parameters of the mechanical hysteresis loops by the DIC method. (3) Results: the developed hardware-software facility was tested by studying the fatigue process in neat polyimide (PI) under various amplitude tension-tension loadings. It was found that the damage accumulation was accompanied by the decrease in the loop areas, while failure occurred when it reduced by at least ~5 kJ/m3. (4) Conclusions: it was shown that lowering the loop area along with changing the secant modulus value makes it possible to estimate the level of the scattered damage accumulation (mainly at the stresses above the OYS level). It was revealed that fractography data, namely the pattern and sizes of the fatigue crack initiation and propagation zones, did not correlate well with the dependences of the parameters of the hysteresis loops Текстовый файл |
| Sprog: | engelsk |
| Udgivet: |
2022
|
| Fag: | |
| Online adgang: | https://doi.org/10.3390/s22166034 |
| Format: | Electronisk Book Chapter |
| KOHA link: | https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=685543 |
Lignende værker
Effect of Polymer Matrix on Inelastic Strain Development in PI- and PEI-Based Composites Reinforced with Short Carbon Fibers under Low-Cyclic Fatigue; Polymers; Vol. 15, iss. 5
Udgivet: (2023)
Udgivet: (2023)
Estimating Low- and High-Cyclic Fatigue of Polyimide-CF-PTFE Composite through Variation of Mechanical Hysteresis Loops; Materials; Vol. 15, iss. 13
Udgivet: (2022)
Udgivet: (2022)
Стенд для исследований усталостного разрушения комбинацией методов акустической эмиссии, картирования деформации на поверхности и тензометрии; Известия Томского политехнического университета [Известия ТПУ]; Т. 325, № 2 : Математика, физика и механика
Udgivet: (2014)
Udgivet: (2014)
Design of the magnetic hysteresis mathematical model based on Preisach theory; Electrical engineering; Vol. 101, iss. 1
af: Andreev M. V. Mikhail Vladimirovich
Udgivet: (2019)
af: Andreev M. V. Mikhail Vladimirovich
Udgivet: (2019)
Resistance of Heterogeneous Metal Compositions to Fracture under Dynamic and Cyclic Loads; Metals; Vol. 13, iss. 11
Udgivet: (2023)
Udgivet: (2023)
Applying Digital Image Correlation Technique for Studying the Growth of a Fatigue Crack in VT23 Titanium Alloy Welded Joints; Russian Journal of Nondestructive Testing; Vol. 55, iss. 5
Udgivet: (2019)
Udgivet: (2019)
Pydic: 2D-DIC Code Accuracy Evaluation for Strain Field Measurements; Electron Devices and Materials (EDM)
af: Abouellail A. F. A. Abdelmeguid Fathy Ahmed
Udgivet: (2024)
af: Abouellail A. F. A. Abdelmeguid Fathy Ahmed
Udgivet: (2024)
Digital image correlation (DIC): Decorrelation problem due to large strains; Перспективы развития фундаментальных наук; Т. 7 : IT-технологии и электроника
af: Abouellail A. F. A. Abdelmeguid Fathy Ahmed
Udgivet: (2024)
af: Abouellail A. F. A. Abdelmeguid Fathy Ahmed
Udgivet: (2024)
Optical Inspection of Surfaces under Large Strains Using Digital Image Correlation; Atmospheric and Oceanic Optics; Vol. 38, iss. 3
af: Abouellail A. F. A. Abdelmeguid Fathy Ahmed
Udgivet: (2025)
af: Abouellail A. F. A. Abdelmeguid Fathy Ahmed
Udgivet: (2025)
In Situ Studies of Strain Fields in Titanium Welds under Tensile Loads by Digital Image Correlation Method; Solid State Phenomena; Vol. 328
Udgivet: (2022)
Udgivet: (2022)
Experimental Evaluation of 2D-DIC Limitations for Hightemperature Surface Inspection: Speckle Degradation, Oxidation, and Out-of-Plane Motion; IEEE Instrumentation & Measurement Magazine; Vol. 29, iss. 2
af: Abouellail A. F. A. Abdelmeguid Fathy Ahmed
Udgivet: (2026)
af: Abouellail A. F. A. Abdelmeguid Fathy Ahmed
Udgivet: (2026)
Определение напряжений и остаточного ресурса по показаниям датчика деформаций интегрального типа переменной чувствительности; Известия Томского политехнического университета [Известия ТПУ]. Инжиниринг георесурсов; Т. 328, № 9
af: Сызранцев В. Н. Владимир Николаевич
Udgivet: (2017)
af: Сызранцев В. Н. Владимир Николаевич
Udgivet: (2017)
Algorithm of fatigue crack detection and determination of its tip position in optical images; Optoelectronics, Instrumentation and Data Processing; Vol. 53, iss. 3
Udgivet: (2017)
Udgivet: (2017)
Accuracy Enhancement in 2D Digital Image Correlation: A Comparative Study of Bi-Cubic, Cubic, and Spline Interpolation Methods; IEEE Instrumentation & Measurement Magazine; Vol. 29, iss. 2
af: Abouellail A. F. A. Abdelmeguid Fathy Ahmed
Udgivet: (2026)
af: Abouellail A. F. A. Abdelmeguid Fathy Ahmed
Udgivet: (2026)
Exploring Charged Defects in Ferroelectrics by the Switching Spectroscopy Piezoresponse Force Microscopy; Small Methods; Vol. 6, iss. 2
Udgivet: (2022)
Udgivet: (2022)
Combined action of crack closure and residual stress under periodic overloads: A fractographic analysis; International Journal of Fatigue; Vol. 82, pt. 3
Udgivet: (2016)
Udgivet: (2016)
Pydic: a free and open source code verification for strain field measurements; Перспективы развития фундаментальных наук; Т. 7 : IT-технологии и электроника
af: Abouellail A. F. A. Abdelmeguid Fathy Ahmed
Udgivet: (2023)
af: Abouellail A. F. A. Abdelmeguid Fathy Ahmed
Udgivet: (2023)
Use of reinforcing elements to improve fatigue strength of steel structures of mine hoisting machines (MHM); Metalurgija; Vol. 59, № 1
Udgivet: (2020)
Udgivet: (2020)
Fracture resistance of the deposited metal under dynamic and cyclic loading; Structural Integrity and Life; Vol. 24, № 2
Udgivet: (2024)
Udgivet: (2024)
Formation of magnetic properties of ferrites during radiation-thermal sintering; Eurasian Physical Technical Journal; Vol. 17, No. 2 (34)
Udgivet: (2020)
Udgivet: (2020)
Impact modelling and a posteriori non-destructive evaluation of homogeneous particleboards of sugarcane bagasse; Journal of Nondestructive Evaluation; Vol. 37, iss. 1
Udgivet: (2018)
Udgivet: (2018)
Synergy of crack closure, near-tip residual stress and crack-tip blunting in crack growth under periodic overloads – A fractographic study; International Journal of Fatigue; Vol. 93, pt. 1
Udgivet: (2016)
Udgivet: (2016)
Influence of Zr-1 wt.% Nb alloy structure state on its deformation and thermal behavior under quasi-static tension; Materials Letters; Vol. 285
Udgivet: (2021)
Udgivet: (2021)
Структурные аспекты циклической прочности сварного узла пароперегревателя; Известия Томского политехнического университета [Известия ТПУ]. Инжиниринг георесурсов; Т. 329, № 11
Udgivet: (2018)
Udgivet: (2018)
Research on the processes of deformation and failure in coarse- and ultrafine-grain states of Zr1–Nb alloys by digital image correlation and infrared thermography; Materials Science and Engineering: A; Vol. 784
Udgivet: (2020)
Udgivet: (2020)
Shack–Hartmann wavefront sensors based on 2D refractive lens arrays and super-resolution multi-contrast X-ray imaging; Journal of Synchrotron Radiation; Vol. 27, iss. 3
Udgivet: (2020)
Udgivet: (2020)
Speckle Pattern of the Surface Layer of Titanium Alloy GRADE 2 and Steel 3723HR Samples under Deformation; Materials Science Forum; Vol. 938 : Materials and Technologies in Mechanical Engineering
Udgivet: (2018)
Udgivet: (2018)
Investigation of the Deformation Dependence of Polymer Films on Various Physical Factors; Polymers; Vol. 17, iss. 21
af: Kupchishin A. I. Anatoly Ivanovich
Udgivet: (2025)
af: Kupchishin A. I. Anatoly Ivanovich
Udgivet: (2025)
Blood coagulation estimation using the method of laser-speckle correlation; Proceedings of SPIE; Vol. 11065 : Saratov Fall Meeting 2018: Optical and Nano-Technologies for Biology and Medicine
Udgivet: (2019)
Udgivet: (2019)
Mobile lidars. Influence of external mechanical actions on accuracy of lidar aiming; Bulletin of the Tomsk Polytechnic University; Vol. 311, № 2
Udgivet: (2007)
Udgivet: (2007)
Estimating the efficiency of two algorithms for segmentation of digital radiation images of test objects; Russian Journal of Nondestructive Testing; Vol. 53, iss. 2
Udgivet: (2017)
Udgivet: (2017)
Universal Approach to Integrating Reduced Graphene Oxide into Polymer Electronics; Polymers; Vol. 15, iss. 24
Udgivet: (2023)
Udgivet: (2023)
The assessment of crack formation processes in reinforced concrete under uniaxial compression by parameters of the electric response to mechanical impact; Progress In Electromagnetics Research Symposium - Spring (PIERS)
af: Fursa T. V. Tatyana Viktorovna
Udgivet: (2017)
af: Fursa T. V. Tatyana Viktorovna
Udgivet: (2017)
Investigation of "smart sensor's" behavior during cyclic test of carbon fiber reinforce polymer; Mechanical Engineering, Automation and Control Systems (MEACS)
Udgivet: (2014)
Udgivet: (2014)
u-nanoparticles based sensors for voltammetric determination of glutathione; Current Analytical Chemistry; Vol. 12
Udgivet: (2016)
Udgivet: (2016)
Контроль структурного состояния ферромагнитного материала по кривой перемагничивания; Ресурсоэффективные системы в управлении и контроле: взгляд в будущее (т. 2)
af: Верпета М. Я. Михаил Ярославович
Udgivet: (2018)
af: Верпета М. Я. Михаил Ярославович
Udgivet: (2018)
Role of Testing Conditions in Formation of Tribological Layers at Line Contacts of Antifriction CF-Reinforced PI- and PEI-Based Composites; Molecules; Vol. 27, iss. 19
Udgivet: (2022)
Udgivet: (2022)
Modeling and Model Verification of the Stress-Strain State of Reinforced Polymer Concrete; Materials; Vol. 16, iss. 9
Udgivet: (2023)
Udgivet: (2023)
Advanced Design Concepts for Shape-Memory Polymers in Biomedical Applications and Soft Robotics; Polymers; Vol. 18, iss. 2
af: Fetisova A. A. Anastasiya Alekseevna
Udgivet: (2026)
af: Fetisova A. A. Anastasiya Alekseevna
Udgivet: (2026)
The effect of crater creation on the fatigue strength and corrosion resistance of steels and titanium alloys irradiated by high-power pulsed ion beams; Surface and Coatings Technology; Vol. 158-159
af: Shulov V. A.
Udgivet: (2002)
af: Shulov V. A.
Udgivet: (2002)
Lignende værker
-
Effect of Polymer Matrix on Inelastic Strain Development in PI- and PEI-Based Composites Reinforced with Short Carbon Fibers under Low-Cyclic Fatigue; Polymers; Vol. 15, iss. 5
Udgivet: (2023) -
Estimating Low- and High-Cyclic Fatigue of Polyimide-CF-PTFE Composite through Variation of Mechanical Hysteresis Loops; Materials; Vol. 15, iss. 13
Udgivet: (2022) -
Стенд для исследований усталостного разрушения комбинацией методов акустической эмиссии, картирования деформации на поверхности и тензометрии; Известия Томского политехнического университета [Известия ТПУ]; Т. 325, № 2 : Математика, физика и механика
Udgivet: (2014) -
Design of the magnetic hysteresis mathematical model based on Preisach theory; Electrical engineering; Vol. 101, iss. 1
af: Andreev M. V. Mikhail Vladimirovich
Udgivet: (2019) -
Resistance of Heterogeneous Metal Compositions to Fracture under Dynamic and Cyclic Loads; Metals; Vol. 13, iss. 11
Udgivet: (2023)