Borosilicate Enamel of Increased Chemical Resistance for Steel Pipes; Glass and Ceramics; Vol. 82, iss. 3-4

Borosilicate Enamel of Increased Chemical Resistance for Steel Pipes; Glass and Ceramics; Vol. 82, iss. 3-4

Библиографические подробности
Источник:	Glass and Ceramics=Стекло и керамика.— .— New York: Springer Science+Business Media LLC. Vol. 82, iss. 3-4.— 2025.— P. 160-164
Другие авторы:	Borovoy V. Yu. Vitaly Yurjevich, Kazmina O. V. Olga Viktorovna, Shekhovtsov V. V. Valentin Valerjevich, Skirdin K. V. Kirill Vyacheslavovich
Примечания:	Title screen This paper presents the results of developing a direct-on enamel frit that exhibits increased chemical resistance against acid and alkali environments, intended for protection of steel pipelines. Zinc oxide was introduced into the frit composition, which improved the resistance of the material due to the higher energy of the metal ion–oxygen chemical bond compared to alkali metal ions. At the same time, the addition of ZnO in the amount of 10 wt.% reduces the flow temperature of the frit. The developed frit composition meets the standard requirements in terms of spreading capacity (45 mm) and thermal coefficient of linear expansion (112 × 10 –7K–1 ). The introduction of zinc oxide in industrial borosilicate enamel in the amount of 5 wt.% leads to an increase in its chemical resistance against acids and alkalis by 4 and 8 times, respectively, compared to conventional industrial frit Текстовый файл AM_Agreement
Язык:	английский
Опубликовано:	2025
Предметы:	frit enamel acid resistance alkali resistance spreading capacity thermal coefficient of linear expansion электронный ресурс труды учёных ТПУ
Online-ссылка:	https://doi.org/10.1007/s10717-025-00765-7 Статья на русском языке
Формат:	Электронный ресурс Статья
Запись в KOHA:	https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=684661

Схожие документы

Induction Synthesis of Frit for Enamel Coating of Steel Pipes; Glass and Ceramics; Vol. 80
по: Borovoy V. Yu. Vitaly Yurjevich
Опубликовано: (2023)

White vitreous enamel for ferrous metals with preliminary thermal activation of frit; Ceramics International; Vol. 47, iss. 20
по: Kazmina O. V. Olga Viktorovna
Опубликовано: (2021)

Рациональное использование сырьевых материалов для получения силикатной эмали с заданными свойствами; Ресурсосберегающие технологии в контроле, управлении качеством и безопасности
по: Боровой В. Ю. Виталий Юрьевич
Опубликовано: (2022)

Antibacterial Properties of Borosilicate Enamel with Nanosized Zinc Oxide Particles; Glass and Ceramics; Vol. 80, iss. 3-4
по: Borovoy V. Yu. Vitaly Yurjevich
Опубликовано: (2023)

Laboratory Substantiation of Thermoelectric Method for Monitoring Contact Resistance; Russian Journal of Nondestructive Testing; Vol. 58, iss. 12
Опубликовано: (2022)

High-strength gypsum binder with improved water-resistance coefficient derived from industrial wastes; Waste Management & Research; Vol. 43, iss. 2
Опубликовано: (2024)

Research of acidity of the surface of powders and properties of thin films of Та2О5 - La2O3 system, obtained by sol-gel method; Bulletin of the Tomsk Polytechnic University; Vol. 309, № 4
Опубликовано: (2006)

Increase in Fast Response Time of the Resistance-to-Voltage Converter When Monitoring the Cable Products’ Insulation Resistance; Sensors; Vol. 21, iss. 2
Опубликовано: (2021)

Resource-efficient methods for predicting and selecting heat-resistant alloys; Resource-Efficient Technologies; No 2
Опубликовано: (2019)

Влияние деформационно-термической обработки (a+b)-сплавов титана ВТ6 и ВТ22 на их коррозионную стойкость; Известия Томского политехнического университета [Известия ТПУ]. Инжиниринг георесурсов; Т. 334, № 4
Опубликовано: (2023)

Development and Study of the Properties of Impact-Resistant Ceramic Nanocomposite Coatings for Silicon; Glass and Ceramics; Vol. 77, iss. 3-4
Опубликовано: (2020)

Assessing Electrode Characteristics in Continuous Resistance Spot Welding of BH 340 Steel Based on Dynamic Resistance; Journal of Manufacturing and Materials Processing; Vol. 7, iss. 6
Опубликовано: (2023)

Регулирование воспроизводимости параметров полимерных резисторов при повышенных температурах; Известия Томского политехнического университета [Известия ТПУ]. Инжиниринг георесурсов; Т. 331, № 10
по: Минакова Н. Н. Наталья Николаевна
Опубликовано: (2020)

Определение водонасыщенности песчаника в нефтегазонасыщенных низкоомных коллекторах при присутствии поверхностной электропроводимости; Известия Томского политехнического университета [Известия ТПУ]. Инжиниринг георесурсов; Т. 336, № 2
по: Мельник И. А. Игорь Анатольевич
Опубликовано: (2025)

Modification of the Structure of Low-Carbon Pipe Steel by Helical Rolling, and the Increase in Its Strength and Cold Resistance; Physics of Metals and Metallography; Vol. 119, iss. 1
Опубликовано: (2018)

Dynamic resistance signal–based wear monitoring of resistance spot welding electrodes; International Journal of Advanced Manufacturing Technology; Vol. 133
Опубликовано: (2024)

Износостойкость металлических образцов, построенных электродуговой наплавкой; Прогрессивные технологии и экономика в машиностроении
по: Судариков Е. В.
Опубликовано: (2023)

Evaluation of the reliability of resistance spot welding control via on-line monitoring of dynamic resistance; Journal of Intelligent Manufacturing; Vol. XX, iss. XX
Опубликовано: (2022)

Influence of Nitrogen on Corrosion Resistance of Thin Ti–O–N Films Deposited by Reactive Magnetron Sputtering; Inorganic Materials: Applied Research; Vol. 12, iss. 4
по: Boytsova E. L. Elena Lvovna
Опубликовано: (2021)

Prediction and stabilization of initial resistance between electrodes for small-scale resistance spot welding; Welding in the World; Vol. 63, iss. 2
по: Akbolatov E. Z. Eldos Zhannuruly
Опубликовано: (2019)

Контроль пропитки - эффективный фактор повышения надежности электродвигателей горнодобывающей, строительной и других отраслей промышленности; Известия Томского политехнического университета [Известия ТПУ]. Инжиниринг георесурсов; Т. 330, № 1
по: Смирнов Г. В. Геннадий Васильевич
Опубликовано: (2019)

Mechanical and tribotechnical properties of polymer-polymeric composites based on “UHMWPE-PTFE” blends; Mechanical Engineering, Automation and Control Systems (MEACS)
Опубликовано: (2014)

Thermal Sensitivity of a Microoptoelectromechanical Evanescent-Coupling-Based Accelerometer; Sensors; Vol. 25, iss. 20
Опубликовано: (2025)

Low resistivity measurement of chromium coatings on zirconium alloys E110 for the production of accident-resistant core components of nuclear reactors; Russian Physics Journal; Vol. 68, iss. 3
по: Salman A. M. Abdelrakhman Mokhamed Abbas Ali
Опубликовано: (2025)

Increasing flow resistance of high-pressure polyethylene modified by ultrafine powders; Bulletin of the Tomsk Polytechnic University; Vol. 310, № 1
Опубликовано: (2007)

Halogenating and nitrating activity of reagents based on sodium nitrate and alkali metal halides in acetic acid; Russian Journal of Organic Chemistry; Vol. 40, iss. 7
Опубликовано: (2004)

Correlation between Properties of Oxide Compounds Formed on Contact Surfaces of Cutting Tools and Cutting Tool Wear Resistance; Materials Science Forum; Vol. 927 : Materials and Processing Technology II
по: Nesterenko V. P. Vladimir Petrovich
Опубликовано: (2018)

Усовершенствованная математическая модель участка магистрального трубопровода с лупингом; Известия Томского политехнического университета [Известия ТПУ]. Инжиниринг георесурсов; Т. 333, № 2
Опубликовано: (2022)

Influence of High Energy Impact on the Structural-Phase State and Tribological Properties of the Surface Layer of Metal-Ceramic Composite Materials; Journal of Surface Investigation. X-ray, Synchrotron and Neutron Techniques; Vol. 12, iss. 3
Опубликовано: (2018)

High Chromium Steel Modification by the Intense Discrete Electron Beam: Structure and Properties; Key Engineering Materials; Vol. 781 : Radiation-Thermal Effects and Processes in Inorganic Materials
Опубликовано: (2018)

Study of the Effect of Low-Frequency Interference on Resistance-to-Voltage Converter in Cable Insulation Testing; Materials Science Forum; Vol. 970 : Modern Problems in Materials Processing, Manufacturing, Testing and Quality Assurance II
по: Ermoshin N. I. Nikolay Ivanovich
Опубликовано: (2019)

Влияние минерализации пластовых вод на физико-химические и фильтрационные характеристики полимерных растворов и гелей для повышения нефтеотдачи пластов; Известия Томского политехнического университета [Известия ТПУ]. Инжиниринг георесурсов; Т. 330, № 3
Опубликовано: (2019)

Optimization of the Process of Producing Porcelain Stoneware from Mineral Raw Materials and Microsilica as a Secondary Raw Material; Ceramics; Vol. 8, iss. 4
Опубликовано: (2025)

A study on microstructure and service property of Ni3Al base alloy irradiated by intense pulsed ion beams; Surface and Coatings Technology; Vol. 158-159
Опубликовано: (2002)

The effect of crater creation on the fatigue strength and corrosion resistance of steels and titanium alloys irradiated by high-power pulsed ion beams; Surface and Coatings Technology; Vol. 158-159
по: Shulov V. A.
Опубликовано: (2002)

Сопротивление породы при бурении мелкорезцовым алмазным инструментом; Известия Томского политехнического университета [Известия ТПУ]. Инжиниринг георесурсов; Т. 332, № 6
по: Нескоромных В. В. Вячеслав Васильевич
Опубликовано: (2021)

Resistance evaluation of electrical insulating polymer materials used in flexible cables to operational impact; Вестник Карагандинского университета. Серия Физика; Vol. 108, № 4
по: Leonov A. P. Andrey Petrovich
Опубликовано: (2022)

Estimation of Thermal Resistance Field in Layered Materials by Analytical Asymptotic Method; Applied Sciences; Vol. 10, iss. 7
Опубликовано: (2020)

Microstructures, Phase Compositions and Mechanical Properties of Small-Scale Permalloy–Mild Steel Dissimilar Joints Made by Resistance Spot Welding with Advanced Power Sources; Journal of Materials Engineering and Performance; Vol. 35, iss. 26
Опубликовано: (2026)

Dry Reforming of Methane over Ni/WC Catalysts: Effect of Ni Content and CH4:CO2 Ratio; Materials; Vol. 18, iss. 17
Опубликовано: (2025)