Investigation of the Operational Durability of High Pressure Metal Hoses Made of Austenitic Steels; Solid State Phenomena; Vol. 328

Investigation of the Operational Durability of High Pressure Metal Hoses Made of Austenitic Steels; Solid State Phenomena; Vol. 328

Detaylı Bibliyografya
Parent link:	Solid State Phenomena.— .— Bäch: Trans Tech Publications Ltd. Vol. 328.— 2022.— P. 1-8
Diğer Yazarlar:	Ivanov V. P. Vitaly Petrovich, Lavrova E. V. Elena Vladimirovna, Ilyashchenko D. P. Dmitry Pavlovich, Morgey F. V. Fedor Viktorovich, Solidor N. N. Nataljya Nikolaevna
Özet:	Title screen The reasons for the decrease in the operational resistance of high-pressure metal hoses made of austenitic steels are considered. The main cause of damage to metal high-pressure hoses was revealed, namely, the low performance of the metal protective braiding under the influence of an unfavorable environment. It has been established in the work that in the initial state the wire made of AISI 201 steel has a high strength (σ0.2 = 1370 MPa and σT = 1650 MPa) and has relatively low plastic characteristics (δ = 15 % и ψ = 40 %), since up to 40–60% deformation martensite is present in its structure. The resistance of steels of the austenitic class AISI 201 and AISI 316 to intergranular corrosion has been investigated. The effect of heat treatment on the mechanical and plastic properties of wire samples of ø made of AISI 201 steel has been investigated. Optimal heat treatment modes have been determined that increase the durability of the braid in an unfavorable environment and, consequently, the operational durability of metal hoses in general Текстовый файл AM_Agreement
Dil:	İngilizce
Baskı/Yayın Bilgisi:	2022
Konular:	Austenitic Steel, Bending Corrosion Resistance Deformation Martensite Heat Treatment High Pressure Metal Hose Intergranular Corrosion Tensile Test Wire Braiding электронный ресурс труды учёных ТПУ
Online Erişim:	https://doi.org/10.4028/p-3i1gz0
Materyal Türü:	Elektronik Kitap Bölümü
KOHA link:	https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=683664

Benzer Materyaller

Low-Temperature Deformation and Fracture of Cr-Mn-N Stainless Steel: Tensile and Impact Bending Tests; Metals; Vol. 13, iss. 1
Baskı/Yayın Bilgisi: (2023)

Influence of metal structural heterogeneity on corrosion of steam boiler pipes; Bulletin of the Tomsk Polytechnic University; Vol. 311, № 4 : Power engineering
Baskı/Yayın Bilgisi: (2007)

Проблемы коррозии и физико-механические модели разрушения конструкционных материалов для энергомашиностроения; Известия Томского политехнического университета [Известия ТПУ]. Инжиниринг георесурсов; Т. 330, № 11
Baskı/Yayın Bilgisi: (2019)

Модификация аустенитно-мартенситной стали ВНС-5 ионно-пучковыми и химическими методами. Анализ электрохимических свойств; Перспективы развития фундаментальных наук; Т. 2 : Химия
Yazar:: Хабибова Е. Д.
Baskı/Yayın Bilgisi: (2024)

Effect of heat treatment on the corrosion inhibition performance of ZnO nanoparticles for high-carbon steel; Journal of the Indian Chemical Society; Vol. 103, iss. 8
Yazar:: Chzhun Linzhu
Baskı/Yayın Bilgisi: (2026)

Milling Parameters and Quality of Machined Surface of Wire Arc Additive Manufactured AISI 321 Steel; Materials; Vol. 19, iss. 3
Baskı/Yayın Bilgisi: (2026)

Effect of helical rolling on the bainitic microstructure and impact toughness of the low-carbon microalloyed steel; Materials Science and Engineering: A; Vol. 816
Baskı/Yayın Bilgisi: (2021)

Influence of hydrogen on mechanical properties of [012]-crystals of austenitic steel Fe-18Cr-14Ni-2Mo; Bulletin of the Tomsk Polytechnic University; Vol. 310, № 1
Baskı/Yayın Bilgisi: (2007)

The Role of Steel Surface Topography in the Performance of Nanostructured Corrosion Inhibitors; Transactions of the Indian Institute of Metals; Vol. 78, iss. 11
Yazar:: Dubinina O. V. Oksana Valerievna
Baskı/Yayın Bilgisi: (2025)

Investigation of the interaction of liquid tin-lithium alloy with austenitic stainless steel at high temperatures; Fusion Engineering and Design; Vol. 191
Baskı/Yayın Bilgisi: (2023)

Heat-Induced Strength Behavior of “Steel - Wood” Composite Modified by Flame Retardant; Solid State Phenomena; Vol. 328
Yazar:: Torosyan V. F. Vera Fedorovna
Baskı/Yayın Bilgisi: (2022)

Effect of Severe Plastic Deformation by Extrusion on Microstructure and Physical and Mechanical Properties of Mg–Y–Nd and Mg–Ca Alloys; Technical Physics; Vol. 67, iss. 12
Baskı/Yayın Bilgisi: (2022)

Inhibitive Effect of a Hybrid Zinc Oxide-Pectin Composite on the Corrosion of Carbon Steel; Journal of Bio- and Tribo-Corrosion; Vol. 12
Yazar:: Li Haonan
Baskı/Yayın Bilgisi: (2026)

Surface treatment techniques and control methods for enhancing corrosion resistance and very thin films management in fast nuclear reactors; Results in Surfaces and Interfaces; Vol. 18
Yazar:: Salman A. M. Abdelrakhman Mokhamed Abbas Ali
Baskı/Yayın Bilgisi: (2025)

Severe Plastic Deformation of Mg–Zn–Zr–Ce Alloys: Advancing Corrosion Resistance and Mechanical Strength for Medical Applications; Metals; Vol. 13, iss. 11
Baskı/Yayın Bilgisi: (2023)

Модификация свойств конструкционной стали катодным пятном дуги низкого давления; Физика и химия обработки материалов; № 5
Baskı/Yayın Bilgisi: (2010)

Uranium Processing and Properties
Baskı/Yayın Bilgisi: (2013)

Влияние деформационно-термической обработки (a+b)-сплавов титана ВТ6 и ВТ22 на их коррозионную стойкость; Известия Томского политехнического университета [Известия ТПУ]. Инжиниринг георесурсов; Т. 334, № 4
Baskı/Yayın Bilgisi: (2023)

The Effect of Welding Mode Parameters on the Operational Properties of Flexible Compensating Elements Made of Austenitic Stainless Steels; Metals; Vol. 13, iss. 2
Baskı/Yayın Bilgisi: (2023)

Supercritical-Pressure Light Water Cooled Reactors
Baskı/Yayın Bilgisi: (2014)

Thermal Stability of Structure and Properties of the Surface Layer of Instrumental Steel Alloyed with Zirconium and Silicon Atoms under the Action of Compression Plasma Flows; Inorganic Materials: Applied Research; Vol. 9, iss. 5
Baskı/Yayın Bilgisi: (2018)

Techniques for Protecting Overhead Lines in Winter Conditions Dimensioning, Icephobic Surfaces, De-Icing Strategies /
Yazar:: Farzaneh, Masoud, ve diğerleri
Baskı/Yayın Bilgisi: (2022)

Strain Hardening and Fracture Behavior during Tension of Directionally Solidified High-Nitrogen Austenitic Steel; AIP Conference Proceedings; Vol. 1909 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2017 (AMHS’17)
Baskı/Yayın Bilgisi: (2017)

Microhardness Homogeneity and Microstructure of High-Nitrogen Austenitic Steel Processed by High-Pressure Torsion; AIP Conference Proceedings; Vol. 1909 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2017 (AMHS’17)
Baskı/Yayın Bilgisi: (2017)

Studies of kinetic plasticity effect in high-speed steels under Martensite transformation; Solid State Phenomena; Vol. 303
Yazar:: Demenkova L. G. Larisa Gennadievna
Baskı/Yayın Bilgisi: (2020)

Application of the Electrochemical Permeation Method for Hydrogen Diffusion Coefficient Determination in Pipeline Steel 10G2; Coatings; Vol. 11, iss. 10
Baskı/Yayın Bilgisi: (2021)

Structure and Deformation Properties of Austenitic Stainless Steel; Physics of Metals and Metallography; Vol. 121, iss. 1
Baskı/Yayın Bilgisi: (2020)

Экспериментальное исследование структурной стабильности стенок котельных труб; Известия Томского политехнического университета [Известия ТПУ]. Инжиниринг георесурсов; Т. 327, № 1
Baskı/Yayın Bilgisi: (2016)

Microstructural Aspects of Corrosion; Journal of Surface Investigation. X-ray, Synchrotron and Neutron Techniques; Vol. 14, iss. 6
Baskı/Yayın Bilgisi: (2020)

Investigation of the Influence of Hydroimpulsive Mechanism Design Parameters on the Formed Impulse; Advanced Materials Research; Vol. 1040 : High Technology: Research and Applications 2014 (HTRA 2014)
Yazar:: Tsigankova M. V. Maria Viktorovna
Baskı/Yayın Bilgisi: (2014)

Evolution of microstructure and mechanical properties of Ti-Nb-Zr and Ti-Nb-Zr-Ta-Sn alloys in severe plastic deformation; Materials Letters; Vol. 382
Baskı/Yayın Bilgisi: (2025)

Роль структурных факторов в повышении коррозионной стойкости трубной стали при циклической термообработке; Известия Томского политехнического университета [Известия ТПУ]; Т. 326, № 5
Yazar:: Помазова А. В. Анна Викторовна
Baskı/Yayın Bilgisi: (2015)

Sustainable corrosion protection of ferrous alloys via synergistic nano-bio hybrids: zinc oxide nanoparticles and sea buckthorn oil; Journal of the Indian Chemical Society; Vol. 103, iss. 7
Yazar:: Min Yang
Baskı/Yayın Bilgisi: (2026)

Микроструктура и механические свойства спеченных образцов жаропрочной 12%-й хромистой ферритно-мартенситной стали; Перспективы развития фундаментальных наук; Т. 1 : Физика
Yazar:: Тимошов И. С.
Baskı/Yayın Bilgisi: (2025)

In-vitro investigation of magnetron-sputtered coatings based on silicon-substituted hydroxyapatite; Journal of Surface Investigation. X-ray, Synchrotron and Neutron Techniques; Vol. 5, iss. 6
Baskı/Yayın Bilgisi: (2011)

Calculation of Uniform Corrosion Current Density of Iron in Hydrochloric Acid Solutions based on the Principle of Maximum Entropy Production Rate Applied to Literature Data; Protection of Metals and Physical Chemistry of Surfaces; Vol. 54, iss. 4
Baskı/Yayın Bilgisi: (2018)

Ion Plasma Passivation of X10CrNiTi18-9 Stainless Steel Samples; AIP Conference Proceedings; Vol. 1783 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016
Baskı/Yayın Bilgisi: (2016)

Surface properties modification of magnesium alloys by low energy high current pulsed electron beam; Surface and Coatings Technology; Vol. 420
Baskı/Yayın Bilgisi: (2021)

Influence of ultrafine-grained structure of Ti-42Nb-7Zr alloy on energy dissipation and storage under quasi-static tension; Materials Letters; Vol. 375
Baskı/Yayın Bilgisi: (2024)

Исследование устройств гашения колебаний технических систем; Информационные технологии (IT) в контроле, управлении качеством и безопасности
Baskı/Yayın Bilgisi: (2019)