Effect of Gd content on microstructure and electromagnetic properties of lithium ferrite-based composite; Journal of Alloys and Compounds; Vol. 1045

Bibliografische gegevens
Parent link:Journal of Alloys and Compounds.— .— Amsterdam: Elsevier Science Publishing Company Inc.
Vol. 1045.— 2025.— Article number 184804 12 p.
Andere auteurs: Elkina Yuliya Sergeevna Yu. S., Lysenko E. N. Elena Nikolaevna, Vlasov V. A. Vitaliy Anatolievich, Surzhikov A. P. Anatoly Petrovich
Samenvatting:The structure and electromagnetic properties of composite ferrite obtained by the solid-phase method from Fe2O3/Li2CO3/Gd2O3 in different weight ratios were investigated by X-ray phase analysis, thermogravimetry, differential scanning calorimetry, scanning electron microscopy and energy-dispersive spectroscopy, as well as by measuring the initial magnetic permeability, hysteresis loop parameters, Curie temperature, DC electrical resistance and dielectric characteristics in the frequency range up to 106 Hz. It was established that during the synthesis of ferrite at 900°C for 4 h, a two-phase composite was formed, consisting of a main phase based on lithium ferrite (Li0.5Fe2.5O4) with a spinel structure and a secondary phase (GdFeO3) with a perovskite-like structure. The structural transformation of the orthorhombic GdFeO3 into the cubic Gd3Fe5O12 phase occurred during high-temperature sintering at 1100 °C and 1150 °C. Increasing the sintering temperature to 1150 °C made it possible to increase the density and reduce the porosity of the composite, especially at low concentrations of REE. It was found that the magnetic composite of Li0.5Fe2.5O4(93.4 wt%)−Gd3Fe5O12(6.6 wt%) composition has good characteristics, including a Curie temperature of 629 °C, magnetic permeability of 40.7, saturation magnetization of 53 emu/g, coercivity of 11 Oe. Moreover, the secondary phase located along the boundaries of ferrite grains had a significant impact on the electrical properties of the composite, increasing the specific electrical resistance from 80 to 106 Ohm·cm for the above-mentioned composition. This ensured lower dielectric losses of ferrite across the entire frequency range
Текстовый файл
AM_Agreement
Taal:Engels
Gepubliceerd in: 2025
Onderwerpen:
Online toegang:https://doi.org/10.1016/j.jallcom.2025.184804
Formaat: Elektronisch Hoofdstuk
KOHA link:https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=683493

MARC

LEADER 00000naa0a2200000 4500
001 683493
005 20251127112319.0
090 |a 683493 
100 |a 20251127d2025 k||y0rusy50 ca 
101 1 |a eng 
102 |a NL 
135 |a drcn ---uucaa 
181 0 |a i   |b  e  
182 0 |a b 
183 0 |a cr  |2 RDAcarrier 
200 1 |a Effect of Gd content on microstructure and electromagnetic properties of lithium ferrite-based composite  |f Yu. S. Elkina, E. N. Lysenko, V. A. Vlasov, A. P. Surzhikov 
203 |a Текст  |b визуальный  |c электронный 
283 |a online_resource  |2 RDAcarrier 
320 |a References: 58 tit 
330 |a The structure and electromagnetic properties of composite ferrite obtained by the solid-phase method from Fe2O3/Li2CO3/Gd2O3 in different weight ratios were investigated by X-ray phase analysis, thermogravimetry, differential scanning calorimetry, scanning electron microscopy and energy-dispersive spectroscopy, as well as by measuring the initial magnetic permeability, hysteresis loop parameters, Curie temperature, DC electrical resistance and dielectric characteristics in the frequency range up to 106 Hz. It was established that during the synthesis of ferrite at 900°C for 4 h, a two-phase composite was formed, consisting of a main phase based on lithium ferrite (Li0.5Fe2.5O4) with a spinel structure and a secondary phase (GdFeO3) with a perovskite-like structure. The structural transformation of the orthorhombic GdFeO3 into the cubic Gd3Fe5O12 phase occurred during high-temperature sintering at 1100 °C and 1150 °C. Increasing the sintering temperature to 1150 °C made it possible to increase the density and reduce the porosity of the composite, especially at low concentrations of REE. It was found that the magnetic composite of Li0.5Fe2.5O4(93.4 wt%)−Gd3Fe5O12(6.6 wt%) composition has good characteristics, including a Curie temperature of 629 °C, magnetic permeability of 40.7, saturation magnetization of 53 emu/g, coercivity of 11 Oe. Moreover, the secondary phase located along the boundaries of ferrite grains had a significant impact on the electrical properties of the composite, increasing the specific electrical resistance from 80 to 106 Ohm·cm for the above-mentioned composition. This ensured lower dielectric losses of ferrite across the entire frequency range 
336 |a Текстовый файл 
371 0 |a AM_Agreement 
461 1 |t Journal of Alloys and Compounds  |c Amsterdam  |n Elsevier Science Publishing Company Inc. 
463 1 |t Vol. 1045  |v Article number 184804 12 p.  |d 2025 
610 1 |a Lithium ferrite 
610 1 |a Li0.5Fe2.5O4 
610 1 |a Rare earth 
610 1 |a Gd3Fe5O12 
610 1 |a Electrical properties 
610 1 |a Magnetic properties 
610 1 |a труды учёных ТПУ 
610 1 |a электронный ресурс 
701 1 |a Elkina  |g Yuliya Sergeevna  |b Yu. S.  |f 1997-  |c chemical engineer  |c Research engineer of Tomsk Polytechnic University  |9 88790 
701 1 |a Lysenko  |b E. N.  |c Specialist in the field of electrical engineering  |c Professor of Tomsk Polytechnic University, Doctor of technical sciences  |f 1972-  |g Elena Nikolaevna  |9 16097 
701 1 |a Vlasov  |b V. A.  |c Physicist  |c Senior researcher of Tomsk Polytechnic University, Candidate of physical and mathematical sciences  |f 1975-  |g Vitaliy Anatolievich  |9 15577 
701 1 |a Surzhikov  |b A. P.  |c physicist  |c Professor of Tomsk Polytechnic University, doctor of physical and mathematical sciences (DSc)  |f 1951-  |g Anatoly Petrovich  |9 14617 
801 0 |a RU  |b 63413507  |c 20251127 
850 |a 63413507 
856 4 |u https://doi.org/10.1016/j.jallcom.2025.184804  |z https://doi.org/10.1016/j.jallcom.2025.184804 
942 |c CF