Микроструктура и микромеханизмы разрушения сплава системы Ni-Cr-Al, полученного методом электронно-лучевого аддитивного производства; Перспективы развития фундаментальных наук; Т. 1 : Физика

Микроструктура и микромеханизмы разрушения сплава системы Ni-Cr-Al, полученного методом электронно-лучевого аддитивного производства; Перспективы развития фундаментальных наук; Т. 1 : Физика

Manylion Llyfryddiaeth
Parent link:	Перспективы развития фундаментальных наук=Prospects of Fundamental Sciences Development: сборник научных трудов XХII Международной конференции студентов, аспирантов и молодых ученых, г. Томск, 22-25 апреля 2025/ Национальный исследовательский Томский политехнический университет ; под ред. И. А. Курзиной [и др.].— .— Томск: Изд-во ТПУ Т. 1 : Физика.— 2025.— С. 167-169
Prif Awdur:	Лысунец М. А.
Awduron Eraill:	Загибалова Е. А. (научный руководитель), Астапов Д. О., Астафурова Е. Г. Елена Геннадьевна
Crynodeb:	Заглавие с экрана Using electron-beam additive manufacturing, a sample of Ni-Cr-Al alloy was obtained. Microstructure, microhardness and fracture micromechanisms of the alloy under uniaxial tension were studied. It was established that high fraction of the brittle intermetallic phases is responsible for low plasticity and brittle fracture of the material at temperatures below 873 K. The material and method can be applied for synthesis of intermetallic coatings Текстовый файл
Iaith:	Rwseg
Cyhoeddwyd:	2025
Pynciau:	труды учёных ТПУ электронный ресурс electron beam additive manufacturing intermetallic alloys microstructure microhardness dendritic structure
Mynediad Ar-lein:	http://earchive.tpu.ru/handle/11683/132836
Fformat:	Electronig Pennod Llyfr
KOHA link:	https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=682406

Eitemau Tebyg

Comparative Analysis of Weld Microstructure in Ti-6Al-4V Samples Produced by Rolling and Wire-Feed Electron Beam Additive Manufacturing; Physical Mesomechanics; Vol. 26, iss. 6
Cyhoeddwyd: (2023)

Microstructural Transformation and Enhanced Strength of Wire-Feed Electron-Beam Additive Manufactured Ti–6Al–4V Alloy Induced by High-Pressure Torsion; Advanced Engineering Materials; Vol. 26, iss. 4
Cyhoeddwyd: (2024)

Beam Current Effect on Microstructure and Properties of Electron-Beam-Melted Ti-6Al-4V Alloy; Journal of Materials Engineering and Performance; Vol. 28, iss. 10
Cyhoeddwyd: (2019)

Electron Beam Impact on Microstructure and Microhardness of Ti–6Al–4V Titanium Alloy Produced by Wire Electron-Beam Additive Manufacturing Technology and Selective Laser Alloying at Simulation of Electronic-Beam Welding; Physics of Metals and Metallography; Vol. 125, iss. 7
Cyhoeddwyd: (2024)

Process window for electron beam melting of Ti–42Nb wt.%; Journal of Materials Research and Technology; Vol. 25
Cyhoeddwyd: (2023)

Effect of Ultrasonic Impact Treatment on Microstructure and Fatigue Life of 3D Printed Ti–6Al–4V Titanium Alloy; Physics of Metals and Metallography; Vol. 124, iss. 10
Cyhoeddwyd: (2023)

Energy input effects on the microstructure and mechanical behavior of Ti–Nb alloy additivelymanufactured by electron beam melting; Materials Science and Engineering: A; Vol. 938
Cyhoeddwyd: (2025)

The High-Temperature In Situ Synchrotron Study of the Structural-Phase Transformations in 3D-Printed Ti–6Al–4V and Ti–5Al–3Mo–V Titanium Alloys; Physics of Metals and Metallography; Vol. 125, iss. 9
Cyhoeddwyd: (2024)

Microstructure and Compressive Behavior of Ti-6Al-4V Alloy Built by Electron Beam Free-Form Fabrication; Journal of Materials Engineering and Performance; Vol. 29, iss. 11
Cyhoeddwyd: (2020)

Increasing the Fatigue Durability of an 3D-Printed Ti-6Al-4V Alloy Electron-Beam Welded Joint by Ultrasonic Electropulsing Shock Treatment; Physics of Metals and Metallography; Vol. 123, iss. 12
Cyhoeddwyd: (2022)

Hydrogen effect on Ti-6.5Al-3.5Mo-1.5Zr-0.3Si parts produced by electron beam melting; International Journal of Hydrogen Energy; Vol. 44, iss. 55
Cyhoeddwyd: (2019)

Microstructure and Phase Composition of 3D Printed Titanium Metal Matrix Composites Based on Ti-Al-V-Fe System and Reinforced with TiC Particles; Russian Physics Journal; Vol. 67, iss. 9
Cyhoeddwyd: (2024)

Особенности формирования сварного шва при имитации электронно-лучевой сварки толстостенных образцов ВТ6, полученных электронно-лучевой аддитивной; Перспективы развития фундаментальных наук; Т. 1 : Физика
gan: Яхин А. Альберт
Cyhoeddwyd: (2025)

Electron Beam Assisted Deposition of Ni-Al Coatings onto Steel Substrate; International Journal of Self-Propagating High-Temperature Synthesis; Vol. 28, iss. 4
Cyhoeddwyd: (2019)

Модификация микроструктуры в процессе ультразвуковой ударной электроискровой обработки сварных швов образцов ВТ6, полученных прокаткой и электронно-лучевой аддитивной технологией; Перспективы развития фундаментальных наук; Т. 1 : Физика
gan: Яхин А. Альберт
Cyhoeddwyd: (2025)

Transformations of the Microstructure and Phase Compositions of Titanium Alloys during Ultrasonic Impact Treatment Part III: Combination with Electrospark Alloying Applied to Additively Manufactured Ti-6Al-4V Titanium Alloy; Metals; Vol. 13, iss. 5
Cyhoeddwyd: (2023)

Hydrogen-Induced Phase Transformation and Microstructure Evolution for Ti-6Al-4V Parts Produced by Electron Beam Melting; Metals; Vol. 8, iss. 5
Cyhoeddwyd: (2018)

Разработка оборудования и технологии электронно-лучевого сплавления; Прогрессивные технологии и экономика в машиностроении
gan: Ханьa Ц.
Cyhoeddwyd: (2022)

Continuous Electron Beam Post-Treatment of EBF3-Fabricated Ti-6Al-4V Parts; Metals; Vol. 9, iss. 6
Cyhoeddwyd: (2019)

In situ synthesis of a binary Ti–10at% Nb alloy by electron beam melting using a mixture of elemental niobium and titanium powders; Journal of Materials Processing Technology; Vol. 282
Cyhoeddwyd: (2020)

Surface Modification of the EBM Ti-6Al-4V Alloy by Pulsed Ion Beam; Metals; Vol. 11, iss. 3
Cyhoeddwyd: (2021)

New Ti–35Nb–7Zr–5Ta Alloy Manufacturing by Electron Beam Melting for Medical Application Followed by High Current Pulsed Electron Beam Treatment; Metals; Vol. 11, iss. 7
Cyhoeddwyd: (2021)

Structure and properties of welding joints of 1370 aluminum alloy obtained by electron-beam welding; Russian Physics Journal; Vol. 68, iss. 2
gan: Solov’ev V. V. Vasily Vladimirovich
Cyhoeddwyd: (2025)

Microstructure and scratch behavior of TiB/Ti-6Al-4V composites fabricated by wire-feed electron beam additive manufacturing; Materials Letters; Vol. 405
Cyhoeddwyd: (2026)

In-situ X-ray diffraction study of hydrogen-induced phase transformation in wire-feed electron-beam additive manufactured Ti-6Al-4V alloy; Journal of Alloys and Compounds; Vol. 1045
Cyhoeddwyd: (2025)

The Effect of Heat Treatment on the Microstructure and Phase Composition of Wrought and 3D-Printed Ti–5Al–3Mo–1V Titanium Alloy Samples; Journal of Surface Investigation: X-ray, Synchrotron and Neutron Techniques; Vol. 17, Suppl. 1
Cyhoeddwyd: (2023)

From raw elements to 3D samples: An economical route for Co-Cr-Mo alloy fabrication; Journal of Alloys and Compounds; Vol. 978
Cyhoeddwyd: (2024)

Influence of manufacturing parameters on microstructure and hydrogen sorption behavior of electron beam melted titanium Ti-6Al-4V alloy; Materials; Vol. 11, iss. 5
Cyhoeddwyd: (2018)

Deformation Behavior of Wrought and EBAM Ti-6Al-4V under Scratch Testing; Metals; Vol. 11, iss. 11
Cyhoeddwyd: (2021)

Developing New Materials for Electron Beam Melting: Experiences and Challenges; Materials Science Forum; Vol. 941 : THERMEC 2018
Cyhoeddwyd: (2018)

The influence of chemical etching on porous structure and mechanical properties of the Ti6AL4V Functionally Graded Porous Scaffolds fabricated by EBM; Materials Chemistry and Physics; Vol. 275
Cyhoeddwyd: (2022)

Влияние легирующих добавок в алюминиевом сплаве на микроструктуру, механические свойства и технологичность при селективном лазерном плавлении; Инновационные технологии в машиностроении
Cyhoeddwyd: (2022)

In situ study of phase transformations in electron beam additive manufactured Ti-6Al-4 V titanium alloy by high temperature synchrotron X-ray diffraction and TEM; Journal of Alloys and Compounds; Vol. 917
gan: Perevalova O. B. Olga Borisovna
Cyhoeddwyd: (2022)

The Structure and Properties of Microcrystalline and Submicrocrystalline Titanium Alloy VT1-0 in the Area of the Electron Beam Welding Seam; Russian Physics Journal; Vol. 60, iss. 6
Cyhoeddwyd: (2017)

Effects of Water Cooling on the Microstructure of Electron Beam Additive-Manufactured Ti-6Al-4V; Metals; Vol. 11, iss. 11
Cyhoeddwyd: (2021)

Микроструктура и механические свойства спеченных образцов жаропрочной 12%-й хромистой ферритно-мартенситной стали; Перспективы развития фундаментальных наук; Т. 1 : Физика
gan: Тимошов И. С.
Cyhoeddwyd: (2025)

Scale levels of quasi-static and dynamic fracture behavior of Ti-6Al-4V parts built by various additive manufacturing methods; Theoretical and Applied Fracture Mechanics; Vol. 110
Cyhoeddwyd: (2020)

Effect of Heat Input on the Microstructure and Phase Composition of Additively Manufactured Ti–6Al–4V Alloy; Journal of Surface Investigation. X-ray, Synchrotron and Neutron Techniques; Vol. 18, iss. 6
gan: Kamelina K. D. Kristina Dmitrievna
Cyhoeddwyd: (2024)

Influence of anisotropy properties and structural inhomogeneity on elasticity and fracture of titanium alloys produced by electron-beam melting; International Journal of Advanced Manufacturing Technology; Vol. 135
Cyhoeddwyd: (2025)

Selective Laser Melting of Magnesium; Key Engineering Materials; Vol. 839 : Materials Science, Mechanical Engineering and Energy: Problems and Prospects for Development, MSMEE 2019
Cyhoeddwyd: (2020)