Структура и свойства композитных покрытий на основе оксинитрида титана и фосфата кальция; Перспективы развития фундаментальных наук; Т. 1 : Физика
Documenti analoghi
On the Application of Oxynitride Thin Films in Biomedicine; Journal of Surface Investigation: X-ray, Synchrotron and Neutron Techniques; Vol. 18, iss. 1 supplement
Pubblicazione: (2024)
Pubblicazione: (2024)
Influence of the substrate bias on the stoichiometry and structure of RF-magnetron sputter-deposited silver-containing calcium phosphate coatings; Materialwissenschaft und Werkstofftechnik; Vol. 44, iss. 2-3
Pubblicazione: (2013)
Pubblicazione: (2013)
Effect of argon and nitrogen mixing ratios on the properties of the coatings deposited via reactive magnetron sputtering of a hydroxyapatite target; Applied Surface Science; Vol. 726
Pubblicazione: (2026)
Pubblicazione: (2026)
Tailoring the Surface Morphology and the Crystallinity State of Cu- and Zn-Substituted Hydroxyapatites on Ti and Mg-Based Alloys; Materials; Vol. 13, iss. 19
Pubblicazione: (2020)
Pubblicazione: (2020)
Thin calcium-phosphate coatings produced by RF Magnetron sputtering and prospects for their use in biomedical engineering; Biomedical Engineering; Vol. 42, iss. 3
Pubblicazione: (2008)
Pubblicazione: (2008)
Porous CaP Coatings Formed by Combination of Plasma Electrolytic Oxidation and RF-Magnetron Sputtering; Coatings; Vol. 10, iss. 11
Pubblicazione: (2020)
Pubblicazione: (2020)
Physical principles of radio-frequency magnetron sputter deposition of calcium-phosphate-based coating with tailored properties; Surface and Coatings Technology; Vol. 413
Pubblicazione: (2021)
Pubblicazione: (2021)
Composite Biphase Coatings Formed by Hybrid Technology for Biomedical Applications; Energy Fluxes and Radiation Effects (EFRE-2020 online)
Pubblicazione: (2020)
Pubblicazione: (2020)
Biological Effect of the Surface Modification of the Fibrous Poly(L-lactic acid) Scaffolds by Radio Frequency Magnetron Sputtering of Different Calcium-Phosphate Targets; BioNanoScience; Vol. 7, iss. 1
Pubblicazione: (2017)
Pubblicazione: (2017)
The preparation of calcium phosphate coatings on titanium and nickel-titanium by rf-magnetron-sputtered deposition: Composition, structure and micromechanical properties; Surface and Coatings Technology; Vol. 202, iss. 16
Pubblicazione: (2008)
Pubblicazione: (2008)
Adhesive and Mechanical Properties of Biocompatible Oxynitride Coatings; Inorganic Materials: Applied Research; Vol. 13, iss. 1
di: Boytsova E. L. Elena Lvovna
Pubblicazione: (2022)
di: Boytsova E. L. Elena Lvovna
Pubblicazione: (2022)
Surface evaluation of titanium oxynitride coatings used for developing layered cardiovascular stents; Materials Science and Engineering: C; Vol. 99
Pubblicazione: (2019)
Pubblicazione: (2019)
Modeling and Experimental Study of Hysteresis during the Reactive Sputter Deposition of Titanium Oxides and Nitrides Using a Pulsed DC Magnetron; Materials Science Forum; Vol. 1065
Pubblicazione: (2022)
Pubblicazione: (2022)
Адгезионные и механические свойства биосовместимых оксинитридных покрытий; Материаловедение; № 6
di: Бойцова Е. Л. Елена Львовна
Pubblicazione: (2021)
di: Бойцова Е. Л. Елена Львовна
Pubblicazione: (2021)
Лазерная наплавка металлокерамических покрытий TiB2-Ni с использованием вакуумной металлизации; Перспективы развития фундаментальных наук; Т. 1 : Физика
di: Баянова Е. О.
Pubblicazione: (2025)
di: Баянова Е. О.
Pubblicazione: (2025)
Interaction of Al2O3 thin films deposited on nanocrystalline titanium with hydrogen; Thin Solid Films; Vol. 591, pt. В : Selected papers from 16th International Conference on Thin Films, October 13-16, 2014, Dubrovnik, Croatia
Pubblicazione: (2014)
Pubblicazione: (2014)
Influence of deposition conditions on the composition, texture and microstructure of RF-magnetron sputter-deposited hydroxyapatite thin films; Thin Solid Films; Vol. 591, pt. В : Selected papers from 16th International Conference on Thin Films, October 13-16, 2014, Dubrovnik, Croatia
Pubblicazione: (2015)
Pubblicazione: (2015)
Hydrogen sorption by Ni-coated titanium alloy VT1-0; International Journal of Hydrogen Energy; Vol. 42, iss. 22
Pubblicazione: (2017)
Pubblicazione: (2017)
Application of high-frequency magnetron sputtering to deposit thin calcium-phosphate biocompatible coatings on a titanium surface; Journal of Surface Investigation. X-ray, Synchrotron and Neutron Techniques; Vol. 1, iss. 6
Pubblicazione: (2007)
Pubblicazione: (2007)
Structure and Photocatalytic Activity of Biocompatible Coatings Based on Titanium; Inorganic Materials: Applied Research; Vol. 14, iss. 4
di: Boytsova E. L. Elena Lvovna
Pubblicazione: (2023)
di: Boytsova E. L. Elena Lvovna
Pubblicazione: (2023)
Influence of Nitrogen on Corrosion Resistance of Thin Ti–O–N Films Deposited by Reactive Magnetron Sputtering; Inorganic Materials: Applied Research; Vol. 12, iss. 4
di: Boytsova E. L. Elena Lvovna
Pubblicazione: (2021)
di: Boytsova E. L. Elena Lvovna
Pubblicazione: (2021)
Radio frequency magnetron sputtering of Sr- and Mg-substituted ?-tricalcium phosphate: Analysis of the physicochemical properties and deposition rate of coatings; Applied Surface Science; Vol. 509
Pubblicazione: (2020)
Pubblicazione: (2020)
RF magnetron-sputtered coatings deposited from biphasic calcium phosphate targets for biomedical implant applications; Bioactive Materials; Vol. 2, iss. 3
Pubblicazione: (2017)
Pubblicazione: (2017)
Analysis of the wettability transition and the phase transition of nitrogen-doped titanium dioxide films: introduction of a graphical model; Ceramics International; Vol. 51, iss. 28, pt. C
Pubblicazione: (2025)
Pubblicazione: (2025)
Electrical Conductivity and Optical Properties of Nanoscale Titanium Films on Sapphire for Localized Plasmon Resonance-Based Sensors; Coatings; Vol. 10, iss. 12
Pubblicazione: (2020)
Pubblicazione: (2020)
Relationship of the Structure and the Effective Diffusion Properties of Porous Zinc- and Copper-Containing Calcium Phosphate Coatings; Inorganic Materials: Applied Research; Vol. 9, iss. 3
Pubblicazione: (2018)
Pubblicazione: (2018)
Electrospun Poly-L-Lactic Acid Scaffolds Surface-Modified via Reactive Magnetron Sputtering Using Different Mixing Ratios of Nitrogen and Xenon; Polymers; Vol. 15, iss. 13
Pubblicazione: (2023)
Pubblicazione: (2023)
Morphofunctional changes of Jurkat T lymphoblasts upon short-term contact with a relief calcium phosphate surface; Cell and Tissue Biology; Vol. 11, iss. 1
Pubblicazione: (2017)
Pubblicazione: (2017)
Titanium Carbide Coating for Hafnium Hydride Neutron Control Rods: In Situ X-ray Diffraction Study; Coatings; Vol. 13, iss. 12
Pubblicazione: (2023)
Pubblicazione: (2023)
The release of nickel from nickel-titanium (NiTi) is strongly reduced by a sub-micrometer thin layer of calcium phosphate deposited by rf-magnetron sputtering; Journal of Materials Science: Materials in Medicine; Vol. 21, iss. 4
Pubblicazione: (2010)
Pubblicazione: (2010)
Структурные, механические и адгезионные исследования покрытий на основе гидроксиапатита с легирующими элементами; Перспективы развития фундаментальных наук; Т. 1 : Физика
di: Анорин В. Е. Виталий Евгеньевич
Pubblicazione: (2025)
di: Анорин В. Е. Виталий Евгеньевич
Pubblicazione: (2025)
Preparation of a silicate-containing hydroxyapatite-based coating by magnetron sputtering: structure and osteoblast-like MG63 cells in vitro study: Structure and osteoblast-like MG63 cells in vitro study; RSC Advances; № 28
Pubblicazione: (2013)
Pubblicazione: (2013)
Formation and structural features of nitrogen-doped titanium dioxide thin films grown by reactive magnetron sputtering; Applied Surface Science; Vol. 534
Pubblicazione: (2020)
Pubblicazione: (2020)
Influence of the Substrate Material on the Formation and Properties of Micro-Arc Coatings with Particles of β-Tricalcium Phosphate; Russian Physics Journal; Vol. 65, iss. 6
Pubblicazione: (2022)
Pubblicazione: (2022)
The role of thermal processes and target evaporation in formation of self-sputtering mode for copper magnetron sputtering; Vacuum; Vol. 152
Pubblicazione: (2018)
Pubblicazione: (2018)
Polyether Ether Ketone Coated with Ultra-Thin Films of Titanium Oxide and Zirconium Oxide Fabricated by DC Magnetron Sputtering for Biomedical Application; Materials; Vol. 15, iss. 22
Pubblicazione: (2022)
Pubblicazione: (2022)
Zn- or Cu-containing CaP-based coatings formed by micro-arc oxidation on titanium and Ti-40Nb Alloy: Part I-Microstructure, composition and properties; Materials; Vol. 13, iss. 18
Pubblicazione: (2020)
Pubblicazione: (2020)
Сравнительный анализ особенностей формирования состава плазмы при магнетронном распылении карбида кремния с использованием охлаждаемой и горячей мишеней; Перспективы развития фундаментальных наук; Т. 1 : Физика
di: Фишер М. Э.
Pubblicazione: (2025)
di: Фишер М. Э.
Pubblicazione: (2025)
Миграционная способность мультипотентных мезенхимальных стромальных клеток при культивировании срельефным кальций-фосфатным покрытием; Проблемы криобиологии и криомедицины; Т. 28, № 1
Pubblicazione: (2018)
Pubblicazione: (2018)
In-Situ XRD Study at Linear Heating in Vacuum of Nanoscale Multilayer Zr/Nb Coatings; Energy Fluxes and Radiation Effects (EFRE-2024)
di: Lomygin A. D. Anton Dmitrievich
Pubblicazione: (2024)
di: Lomygin A. D. Anton Dmitrievich
Pubblicazione: (2024)
Documenti analoghi
-
On the Application of Oxynitride Thin Films in Biomedicine; Journal of Surface Investigation: X-ray, Synchrotron and Neutron Techniques; Vol. 18, iss. 1 supplement
Pubblicazione: (2024) -
Influence of the substrate bias on the stoichiometry and structure of RF-magnetron sputter-deposited silver-containing calcium phosphate coatings; Materialwissenschaft und Werkstofftechnik; Vol. 44, iss. 2-3
Pubblicazione: (2013) -
Effect of argon and nitrogen mixing ratios on the properties of the coatings deposited via reactive magnetron sputtering of a hydroxyapatite target; Applied Surface Science; Vol. 726
Pubblicazione: (2026) -
Tailoring the Surface Morphology and the Crystallinity State of Cu- and Zn-Substituted Hydroxyapatites on Ti and Mg-Based Alloys; Materials; Vol. 13, iss. 19
Pubblicazione: (2020) -
Thin calcium-phosphate coatings produced by RF Magnetron sputtering and prospects for their use in biomedical engineering; Biomedical Engineering; Vol. 42, iss. 3
Pubblicazione: (2008)