In Situ Synchrotron Study of the Phase Transformations in Ti-5.7Al-1.6V-3Mo Titanium Alloy at High Temperature

Podrobná bibliografie
Parent link:Journal of Materials Engineering and Performance.— .— New York: Springer Nature
Vol. 33, iss. 19.— 2024.— P. 10535-10545
Hlavní autor: Perevalova O. B. Olga Borisovna
Další autoři: Panin A. V. Alexey Viktorovich, Syrtanov M. S. Maksim Sergeevich
Shrnutí:Title screen
The microstructure, phase composition and elemental composition in the α- and β-phases of the two-phase wrought Ti-5.7Al-1.6V-3Mo titanium alloy at room temperature were studied by transmission electron microscopy and X-ray energy-dispersive spectroscopy. The temperature ranges of phase transformations in the alloy during heating from 298 to 1523 K were studied by differential scanning calorimetry (DSC). Two endothermic peaks were observed on the DSC curve at the temperatures of 1078 K and 1207 K, and one exothermic peak was observed at a temperature of 1123 K. The endothermic peak on the DSC curve at a temperature of 1078 K is due to the formation of α″-martensite, at a temperature of 1207 K is caused by α → β phase transformation. The exothermic peak at a temperature of 1123 K, presumably, corresponds to the polymorphic transformation of brookite → rutile in TiO2 oxide. High-temperature synchrotron studies were carried out from room temperature to 1373 K. It was found that the increase in lattice parameters during heating is nonlinear. Possible mechanisms of the nonlinear change in the lattice parameters at temperatures above 1200 K are discussed. At T > 1000 K α″-martensite was formed by β → α″ phase transformation. An increase in the volume fraction of α″-phase with increase in temperature was accompanied by a decrease in the volume fraction of β-phase. An increase in microstrain of the α-phase lattice and a decrease in microstrain of the β-phase lattice were observed upon heating
Текстовый файл
AM_Agreement
Jazyk:angličtina
Vydáno: 2024
Témata:
On-line přístup:https://doi.org/10.1007/s11665-023-08675-x
Médium: Elektronický zdroj Kapitola
KOHA link:https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=682008

MARC

LEADER 00000naa0a2200000 4500
001 682008
005 20250930120705.0
090 |a 682008 
100 |a 20250930d2024 k||y0rusy50 ba 
101 0 |a eng 
102 |a US 
135 |a drcn ---uucaa 
181 0 |a i   |b  e  
182 0 |a b 
183 0 |a cr  |2 RDAcarrier 
200 1 |a In Situ Synchrotron Study of the Phase Transformations in Ti-5.7Al-1.6V-3Mo Titanium Alloy at High Temperature  |f O. B. Perevalova, A. V. Panin, M. S. Syrtanov 
203 |a Текст  |b визуальный  |c электронный 
283 |a online_resource  |2 RDAcarrier 
300 |a Title screen 
320 |a References: 46 tit 
330 |a The microstructure, phase composition and elemental composition in the α- and β-phases of the two-phase wrought Ti-5.7Al-1.6V-3Mo titanium alloy at room temperature were studied by transmission electron microscopy and X-ray energy-dispersive spectroscopy. The temperature ranges of phase transformations in the alloy during heating from 298 to 1523 K were studied by differential scanning calorimetry (DSC). Two endothermic peaks were observed on the DSC curve at the temperatures of 1078 K and 1207 K, and one exothermic peak was observed at a temperature of 1123 K. The endothermic peak on the DSC curve at a temperature of 1078 K is due to the formation of α″-martensite, at a temperature of 1207 K is caused by α → β phase transformation. The exothermic peak at a temperature of 1123 K, presumably, corresponds to the polymorphic transformation of brookite → rutile in TiO2 oxide. High-temperature synchrotron studies were carried out from room temperature to 1373 K. It was found that the increase in lattice parameters during heating is nonlinear. Possible mechanisms of the nonlinear change in the lattice parameters at temperatures above 1200 K are discussed. At T > 1000 K α″-martensite was formed by β → α″ phase transformation. An increase in the volume fraction of α″-phase with increase in temperature was accompanied by a decrease in the volume fraction of β-phase. An increase in microstrain of the α-phase lattice and a decrease in microstrain of the β-phase lattice were observed upon heating 
336 |a Текстовый файл 
371 0 |a AM_Agreement 
461 1 |t Journal of Materials Engineering and Performance  |c New York  |n Springer Nature 
463 1 |t Vol. 33, iss. 19  |v P. 10535-10545  |d 2024 
610 1 |a crystal lattice parameters of the α- and β-phases 
610 1 |a Cu Kα X-ray diffraction 
610 1 |a high-temperature synchrotron X-ray diffraction 
610 1 |a phase composition 
610 1 |a phase transformation 
610 1 |a Ti-5.7Al-1.6V-3Mo alloy 
610 1 |a электронный ресурс 
610 1 |a труды учёных ТПУ 
700 1 |a Perevalova  |b O. B.  |g Olga Borisovna 
701 1 |a Panin  |b A. V.  |c physicist  |c Professor of Tomsk Polytechnic University, doctor of physical and mathematical Sciences  |f 1971-  |g Alexey Viktorovich  |9 17992 
701 1 |a Syrtanov  |b M. S.  |c physicist  |c Associate Professor, Researcher of Tomsk Polytechnic University, Candidate of Technical Sciences  |f 1990-  |g Maksim Sergeevich  |9 18114 
801 0 |a RU  |b 63413507  |c 20250930  |g RCR 
856 4 0 |u https://doi.org/10.1007/s11665-023-08675-x  |z https://doi.org/10.1007/s11665-023-08675-x 
942 |c CF