The effect of metal surface roughness on the characteristics of sessile droplet evaporation: Experimental data and numerical simulation; Physics of Fluids; Vol. 37, iss. 6
| Parent link: | Physics of Fluids.— .— New York: AIP Publishing Vol. 37, iss. 6.— 2025.— Article number 062106, 24 p. |
|---|---|
| Diğer Yazarlar: | , , , , |
| Özet: | Title screen The integral characteristics of heating and evaporation of water droplets placed on different steel plates were studied. Seven samples of steel plates with different roughness (root mean square height from 0.05 to 0.38 μm) and wettability (from 71.6° to 89.1°) were produced by processing with an abrasive material with an average grain size ranging from 1 to 160 μm and studied. The droplet volume and surface temperature were constant and equal to 10 μl and 100 °C, respectively. The geometric characteristics of the evaporating droplet were determined using the shadow images of the droplets. Three droplet evaporation modes were distinguished: spreading, fixing of the three-phase contact line, and mixed. Based on the experimental results, a hypothesis was formulated, that the conditions for the transition between the modes during evaporation were affected by the wettability properties of the surface and its roughness in a narrow range of values. Also, the functional relationships between sliding velocity and surface morphology were identified and considered in simulation via empirical coefficients. They had become fundamental for a mathematical model of conjugate heat and mass transfer of a water droplet on a surface, which differs from the known ones by taking into account the roughness and wettability of the surface with contact angles varying in wide ranges (from hydrophilic to hydrophobic). Using this model, numerical research on heating and evaporation of water droplets on abrasively processed steel surfaces was performed. The effect of variation of initial water volumes (from 0.001 to 10 μl) and the temperature of the rough surface (from 20 to 100 °C) was investigated. The dependences were obtained, which describe the functional relationships between input and output parameters for predictive assessments of heat transfer characteristics of similar processes Текстовый файл AM_Agreement |
| Dil: | İngilizce |
| Baskı/Yayın Bilgisi: |
2025
|
| Konular: | |
| Online Erişim: | https://doi.org/10.1063/5.0263369 |
| Materyal Türü: | Elektronik Kitap Bölümü |
| KOHA link: | https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=681309 |
MARC
| LEADER | 00000naa0a2200000 4500 | ||
|---|---|---|---|
| 001 | 681309 | ||
| 005 | 20250821110705.0 | ||
| 090 | |a 681309 | ||
| 100 | |a 20250821d2025 k||y0rusy50 ba | ||
| 101 | 0 | |a eng | |
| 102 | |a US | ||
| 135 | |a drcn ---uucaa | ||
| 181 | 0 | |a i |b e | |
| 182 | 0 | |a b | |
| 183 | 0 | |a cr |2 RDAcarrier | |
| 200 | 1 | |a The effect of metal surface roughness on the characteristics of sessile droplet evaporation: Experimental data and numerical simulation |f Dmitrii V. Antonov, Anastasia G. Islamova, Alexander Nigay [et al.] | |
| 203 | |a Текст |b визуальный |c электронный | ||
| 283 | |a online_resource |2 RDAcarrier | ||
| 300 | |a Title screen | ||
| 320 | |a References: 50 tit | ||
| 330 | |a The integral characteristics of heating and evaporation of water droplets placed on different steel plates were studied. Seven samples of steel plates with different roughness (root mean square height from 0.05 to 0.38 μm) and wettability (from 71.6° to 89.1°) were produced by processing with an abrasive material with an average grain size ranging from 1 to 160 μm and studied. The droplet volume and surface temperature were constant and equal to 10 μl and 100 °C, respectively. The geometric characteristics of the evaporating droplet were determined using the shadow images of the droplets. Three droplet evaporation modes were distinguished: spreading, fixing of the three-phase contact line, and mixed. Based on the experimental results, a hypothesis was formulated, that the conditions for the transition between the modes during evaporation were affected by the wettability properties of the surface and its roughness in a narrow range of values. Also, the functional relationships between sliding velocity and surface morphology were identified and considered in simulation via empirical coefficients. They had become fundamental for a mathematical model of conjugate heat and mass transfer of a water droplet on a surface, which differs from the known ones by taking into account the roughness and wettability of the surface with contact angles varying in wide ranges (from hydrophilic to hydrophobic). Using this model, numerical research on heating and evaporation of water droplets on abrasively processed steel surfaces was performed. The effect of variation of initial water volumes (from 0.001 to 10 μl) and the temperature of the rough surface (from 20 to 100 °C) was investigated. The dependences were obtained, which describe the functional relationships between input and output parameters for predictive assessments of heat transfer characteristics of similar processes | ||
| 336 | |a Текстовый файл | ||
| 371 | 0 | |a AM_Agreement | |
| 461 | 1 | |t Physics of Fluids |c New York |n AIP Publishing | |
| 463 | 1 | |t Vol. 37, iss. 6 |v Article number 062106, 24 p. |d 2025 | |
| 610 | 1 | |a электронный ресурс | |
| 610 | 1 | |a труды учёных ТПУ | |
| 701 | 1 | |a Antonov |b D. V. |c specialist in the field of heat and power engineering |c Associate Professor, Research Engineer at Tomsk Polytechnic University, Candidate of Physical and Mathematical Sciences |f 1996- |g Dmitry Vladimirovich |9 22322 | |
| 701 | 1 | |a Islamova |b A. G. |c specialist in the field of thermal engineering |c Engineer of Tomsk Polytechnic University |f 1993- |g Anastasiya Gomilievna |9 20239 | |
| 701 | 1 | |a Nigay |b A. G. |c specialist in the field of informatics and computer technology |c engineer of Tomsk Polytechnic University |f 1992- |g Aleksandr Gerasimovich |9 20167 | |
| 701 | 1 | |a Slusarskiy (Slyusarsky) |b K. V. |g Konstantin Vitalievich |f 1990- |c specialist in the field of power engineering |c Associate Professor of Tomsk Polytechnic University, Candidate of Physical and Mathematical Sciences |9 18803 | |
| 701 | 1 | |a Strizhak |b P. A. |c Specialist in the field of heat power energy |c Doctor of Physical and Mathematical Sciences (DSc), Professor of Tomsk Polytechnic University (TPU) |f 1985- |g Pavel Alexandrovich |9 15117 | |
| 801 | 0 | |a RU |b 63413507 |c 20250821 | |
| 850 | |a 63413507 | ||
| 856 | 4 | |u https://doi.org/10.1063/5.0263369 |z https://doi.org/10.1063/5.0263369 | |
| 942 | |c CF | ||