Enhancing Microhardness and Corrosion Resistance of Anodic Oxides Grown on Hypoeutectic Al–Si Alloys Pretreated by Low-Energy High-Current Electron Beams; Journal of Surface Investigation. X-ray, Synchrotron and Neutron Techniques; Vol. 18, iss. 5

Enhancing Microhardness and Corrosion Resistance of Anodic Oxides Grown on Hypoeutectic Al–Si Alloys Pretreated by Low-Energy High-Current Electron Beams; Journal of Surface Investigation. X-ray, Synchrotron and Neutron Techniques; Vol. 18, iss. 5

Podrobná bibliografie
Parent link:	Journal of Surface Investigation. X-ray, Synchrotron and Neutron Techniques.— .— New York: Springer Science+Business Media LLC Vol. 18, iss. 5.— 2024.— P. 1135-1145
Další autoři:	Huspek A. L. Lucchini, Akdogan B., Akhmadeev Yu. Kh. Yury Khalyafovich, Petrikova E. A. Elizaveta Alekseevna, Ivanov Yu. F. Yury Fedorovich, Moskvin P. V. Pavel Vladimirovich, Koval N. N. Nikolay Nikolaevich, Bestetti M. Massimiliano
Shrnutí:	Title screen Anodic oxidation is widely employed in industry to impart high mechanical properties and improve the corrosion resistance of Al–Si alloys. However, compared to pure Al, the high content of Si prevents the growth of a uniform anodic layer, leading to the formation of cracks and porosities within the oxide. In the present work, low-energy high-current electron beam is used as pretreatment of a hypoeutectic Al–Si alloy to enhance the properties of the anodic oxide. Electron beam modified samples showed a fine and homogenous dispersion of Si in the α-matrix, together with a content reduction of Si in the treated layer. Hard anodic oxides grown on electron beam pre-treated alloys exhibited a higher microhardness, increased by 65%, and a lower corrosion current density, decreased by 94%. Cross-sectional SEM morphology and EDX elemental maps showed less defective anodic oxides, in contrast with oxide formed on as-cast hypoeutectic Al–Si alloys Текстовый файл AM_Agreement
Jazyk:	angličtina
Vydáno:	2024
Témata:	hypoeutectic Al–Si alloy high-current low-energy electron beam surface modification hard anodic oxidation corrosion resistance microhardness электронный ресурс труды учёных ТПУ
On-line přístup:	https://doi.org/10.1134/S1027451024700940
Médium:	Elektronický zdroj Kapitola
KOHA link:	https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=681289

Podobné jednotky

Study of Melting Methods by Electric Resistance Welding of Rails; Metals; Vol. 12, iss. 12
Vydáno: (2022)

SiC- and Ag-SiC-Doped Hydroxyapatite Coatings Grown Using Magnetron Sputtering on Ti Alloy for Biomedical Application; Coatings; Vol. 12, iss. 2
Vydáno: (2022)

Surface characterization and biological assessment of corrosion-resistant a-C:H:SiOx PACVD coating for Ti-6Al-4V alloy; Materials Science and Engineering: C; Vol. 123
Vydáno: (2021)

The structure - phase state and microhardness of the surface layer of the VT1-0 titanium alloys treated by copper ions; Vacuum; Vol. 149
Vydáno: (2018)

Aluminum coating performance enhancement: novel coating and characterization techniques; Перспективы развития фундаментальных наук; Т. 1 : Физика
Autor: Salman A. M.
Vydáno: (2024)

Comprehensive Characterization of Titania Nanotubes Fabricated on Ti–Nb Alloys: Surface Topography, Structure, Physicomechanical Behavior, and a Cell Culture Assay; ACS Biomaterials Science and Engineering; Vol. 6, iss. 3
Vydáno: (2020)

Evaluation of surface modification techniques on the ability of apatite formation and corrosion behavior in synthetic body fluid: An in vitro study; Surfaces and Interfaces; Vol. 22
Vydáno: (2021)

Thermal stability and oxidation resistance of ZrSiN nanocomposite and ZrN/SiNx multilayered coatings: A comparative study; Surface and Coatings Technology; Vol. 332
Vydáno: (2017)

Исследования высокотемпературной коррозии SiC-покрытия на графите; Известия Томского политехнического университета [Известия ТПУ]. Инжиниринг георесурсов; Т. 330, № 6
Vydáno: (2019)

Surface treatment techniques and control methods for enhancing corrosion resistance and very thin films management in fast nuclear reactors; Results in Surfaces and Interfaces; Vol. 18
Autor: Salman A. M. Abdelrakhman Mokhamed Abbas Ali
Vydáno: (2025)

Solid oxide fuel cell anode surface modification by magnetron sputtering of NiO/YSZ thin film; Energy Fluxes and Radiation Effects (EFRE-2016)
Vydáno: (2016)

A Review of Magnesium Alloys In Vivo Antibacterial Properties: Challenges, Solutions, and Perspectives in Implant-Associated Orthopedic Infections; Journal of Biomedical Materials Research - Part B Applied Biomaterials; Vol. 113, iss. 7
Vydáno: (2025)

Improvement of Mechanical Properties and Adhesion of Ti-Al-Si-N Coatings by Alloying with Ta; Lubricants; Vol. 10 iss. 8
Vydáno: (2022)

Tribological properties of alloyed TiSi-stainless steel carbide coatings deposited by reactive cathodic arc method; Wear; Vol. 460-461
Vydáno: (2020)

Results of service tests of industrial water cycle in blowoff free conditions using zink-bichromate-phosphate corrosion inhibitors and hard salt accumulation; Bulletin of the Tomsk Polytechnic University; Vol. 310, № 2
Autor: Ushakov V. Ya. Vasily Yakovlevich
Vydáno: (2007)

Thermal Stability of Structure and Properties of the Surface Layer of Instrumental Steel Alloyed with Zirconium and Silicon Atoms under the Action of Compression Plasma Flows; Inorganic Materials: Applied Research; Vol. 9, iss. 5
Vydáno: (2018)

Исследование упрочнения поверхности сталей при комбинированном ионном и лазерном воздействии; Известия Томского политехнического университета [Известия ТПУ]; Т. 324, № 2 : Математика и механика. Физика
Vydáno: (2014)

Multifunctional Ti based carbonitride coatings for applications in severe environments; Thin Solid Films; Vol. 682
Vydáno: (2019)

The Influence of Two-Jet Gas Shielding Parameters on the Structure and Microhardness of Steel 45 Joints during Consumable Electrode Welding; Metals; Vol. 13, iss. 6
Autor: Chinakhov D. A. Dmitriy Anatol'evich
Vydáno: (2023)

Influence of W Addition on Microstructure and Mechanical Properties of Al-12%Si Alloys; Materials; Vol. 12, iss. 6
Vydáno: (2019)

Influence of Modifying Mixtures on Si Crystal Formation in Al-7%Si Alloy; Metals; Vol. 8, iss. 2
Vydáno: (2018)

TiSiCN as Coatings Resistant to Corrosion and Neutron Activation; Materials; Vol. 16, iss. 5
Vydáno: (2023)

Structure, mechanical and tribological properties of Ti-doped and Cr-doped a-C:H:SiOx coatings; Vacuum; Vol. 219, Pt. A
Vydáno: (2024)

Suppression of Heavy Ion Generation in a Vacuum Diode with a Passive Anode; Plasma Physics Reports; Vol. 48, iss. 11
Vydáno: (2022)

Effect of magnetron sputtered anode functional layer on the anode-supported solid oxide fuel cell performance; International Journal of Hydrogen Energy; Vol. 44, iss. 58
Vydáno: (2019)

Generation of pulsed proton beams in a vacuum diode with a passive anode; Vacuum; Vol. 216
Vydáno: (2023)

Microstructure, microhardness and chemical composition of a detail obtained by electro-arc surfacing on a hardware-software complex of a delta layout; Structural Integrity and Life; Vol. 24, № 3
Vydáno: (2024)

Microstructural Aspects of Corrosion; Journal of Surface Investigation. X-ray, Synchrotron and Neutron Techniques; Vol. 14, iss. 6
Vydáno: (2020)

Influence of Nitrogen on Corrosion Resistance of Thin Ti–O–N Films Deposited by Reactive Magnetron Sputtering; Inorganic Materials: Applied Research; Vol. 12, iss. 4
Autor: Boytsova E. L. Elena Lvovna
Vydáno: (2021)

Mechanical Properties and Structure of the Hypereutectic Silumin Treated by an Electron Beam; Key Engineering Materials; Vol. 743 : High Technology: Research and Applications (HTRA 2016)
Vydáno: (2017)

Plasma-Immersion Modification of Nitinol Surface with Silicon to Improve the Corrosion Resistance of the Alloy in Biological Media; Key Engineering Materials; Vol. 743 : High Technology: Research and Applications (HTRA 2016)
Vydáno: (2017)

The effect of crater creation on the fatigue strength and corrosion resistance of steels and titanium alloys irradiated by high-power pulsed ion beams; Surface and Coatings Technology; Vol. 158-159
Autor: Shulov V. A.
Vydáno: (2002)

Electrothermal properties and interdiffusion behavior of Cr/Mo coated Zr-1Nb alloy under high temperature for corrosion resistance of nuclear reactor; Discover Materials; Vol. 5
Autor: Salman A. M. Abdelrakhman Mokhamed Abbas Ali
Vydáno: (2025)

Characterization of electron beam deposited Nb2O5 coatings for biomedical applications; Journal of the Mechanical Behavior of Biomedical Materials; Vol. 103
Vydáno: (2020)

Severe Plastic Deformation of Mg–Zn–Zr–Ce Alloys: Advancing Corrosion Resistance and Mechanical Strength for Medical Applications; Metals; Vol. 13, iss. 11
Vydáno: (2023)

Surface properties modification of magnesium alloys by low energy high current pulsed electron beam; Surface and Coatings Technology; Vol. 420
Vydáno: (2021)

Inhibitive Effect of a Hybrid Zinc Oxide-Pectin Composite on the Corrosion of Carbon Steel; Journal of Bio- and Tribo-Corrosion; Vol. 12
Autor: Li Haonan
Vydáno: (2026)

Influence of metal structural heterogeneity on corrosion of steam boiler pipes; Bulletin of the Tomsk Polytechnic University; Vol. 311, № 4 : Power engineering
Vydáno: (2007)

Экспериментальное исследование структурной стабильности стенок котельных труб; Известия Томского политехнического университета [Известия ТПУ]. Инжиниринг георесурсов; Т. 327, № 1
Vydáno: (2016)

Sustainable corrosion protection of ferrous alloys via synergistic nano-bio hybrids: zinc oxide nanoparticles and sea buckthorn oil; Journal of the Indian Chemical Society; Vol. 103, iss. 7
Autor: Min Yang
Vydáno: (2026)