Wood pellets with waste: energy, environmental and mechanical aspects
| Parent link: | Renewable Energy.— .— Amsterdam: Elsevier Science Publishing Company Inc. Vol. 250.— 2025.— Article number 123269, 18 p. |
|---|---|
| Інші автори: | , , , |
| Резюме: | Title screen Combining several components in the composition of pellets affects their physicochemical processes of combustion. The motivation of this research is to perform a comprehensive study on the characteristics of production and combustion of composite pellet. It served as a basis for a multi-criteria evaluation encompassing energy, economic and environmental components. The study reports experimental findings on the effect of straw and cardboard in the composition of wood pellets. The proportion of additives was varied from 10 wt% to 50 wt%. The addition of cardboard and straw to wood pellets increased their density by 3–15 %. The maximum vibration durability was exhibited by wood pellets and pellets with 50 wt% of cardboard. The use of straw in fuel pellets reduced the gas-phase ignition delay times by 30 % compared to pellets without additives. The co-combustion of straw and wood was found to yield almost 30 % lower emissions of СО2. The concentrations of СО and SO2 in the composition of flue gases produced by the combustion of composite pellets decreased by 15–60 % and 21–64%, respectively. A multi-criteria analysis revealed that the use of cardboard, straw and carboxymethylcellulose increased the efficiency indicator by 6 % relative to pellets without additives Текстовый файл AM_Agreement |
| Опубліковано: |
2025
|
| Предмети: | |
| Онлайн доступ: | https://doi.org/10.1016/j.renene.2025.123269 |
| Формат: | Електронний ресурс Частина з книги |
| KOHA link: | https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=680713 |
MARC
| LEADER | 00000naa0a2200000 4500 | ||
|---|---|---|---|
| 001 | 680713 | ||
| 005 | 20250620093549.0 | ||
| 090 | |a 680713 | ||
| 100 | |a 20250620d2025 k||y0rusy50 ba | ||
| 101 | 0 | |a eng | |
| 102 | |a NL | ||
| 135 | |a drcn ---uucaa | ||
| 181 | 0 | |a i |b e | |
| 182 | 0 | |a b | |
| 183 | 0 | |a cr |2 RDAcarrier | |
| 200 | 1 | |a Wood pellets with waste: energy, environmental and mechanical aspects |f G. S. Nyashina, V. V. Dorokhov, D. K. Shvedov, P. A. Strizhak | |
| 203 | |a Текст |b визуальный |c электронный | ||
| 283 | |a online_resource |2 RDAcarrier | ||
| 300 | |a Title screen | ||
| 320 | |a References: 76 tit | ||
| 330 | |a Combining several components in the composition of pellets affects their physicochemical processes of combustion. The motivation of this research is to perform a comprehensive study on the characteristics of production and combustion of composite pellet. It served as a basis for a multi-criteria evaluation encompassing energy, economic and environmental components. The study reports experimental findings on the effect of straw and cardboard in the composition of wood pellets. The proportion of additives was varied from 10 wt% to 50 wt%. The addition of cardboard and straw to wood pellets increased their density by 3–15 %. The maximum vibration durability was exhibited by wood pellets and pellets with 50 wt% of cardboard. The use of straw in fuel pellets reduced the gas-phase ignition delay times by 30 % compared to pellets without additives. The co-combustion of straw and wood was found to yield almost 30 % lower emissions of СО2. The concentrations of СО and SO2 in the composition of flue gases produced by the combustion of composite pellets decreased by 15–60 % and 21–64%, respectively. A multi-criteria analysis revealed that the use of cardboard, straw and carboxymethylcellulose increased the efficiency indicator by 6 % relative to pellets without additives | ||
| 336 | |a Текстовый файл | ||
| 371 | |a AM_Agreement | ||
| 461 | 1 | |t Renewable Energy |c Amsterdam |n Elsevier Science Publishing Company Inc. | |
| 463 | 1 | |t Vol. 250 |v Article number 123269, 18 p. |d 2025 | |
| 610 | 1 | |a электронный ресурс | |
| 610 | 1 | |a труды учёных ТПУ | |
| 610 | 1 | |a Pellet | |
| 610 | 1 | |a Biomass | |
| 610 | 1 | |a Municipal solid waste | |
| 610 | 1 | |a Combustion | |
| 610 | 1 | |a Emissions | |
| 610 | 1 | |a Mechanical properties | |
| 701 | 1 | |a Nyashina |b G. S. |c specialist in the field of heat and power engineering |c Assistant to Tomsk Polytechnic University, Candidate of Technical Sciences |f 1992- |g Galina Sergeevna |9 18988 | |
| 701 | 1 | |a Dorokhov |b V. V. |c specialist in the field of thermal power engineering and heat engineering |c Research Engineer of Tomsk Polytechnic University |f 1997- |g Vadim Valerjevich |9 22771 | |
| 701 | 1 | |a Shvedov |b D. K. |g Denis Konstantinovich | |
| 701 | 1 | |a Strizhak |b P. A. |c Specialist in the field of heat power energy |c Doctor of Physical and Mathematical Sciences (DSc), Professor of Tomsk Polytechnic University (TPU) |f 1985- |g Pavel Alexandrovich |9 15117 | |
| 801 | 0 | |a RU |b 63413507 |c 20250620 | |
| 850 | |a 63413507 | ||
| 856 | 4 | |u https://doi.org/10.1016/j.renene.2025.123269 |z https://doi.org/10.1016/j.renene.2025.123269 | |
| 942 | |c CF | ||