$Influence of Refractory Fillers on the Properties of Ceramics Based on Highly Concentrated Silica Glass Suspensions; Glass and Ceramics; Vol. 81, iss. 1-2$

Influence of Refractory Fillers on the Properties of Ceramics Based on Highly Concentrated Silica Glass Suspensions; Glass and Ceramics; Vol. 81, iss. 1-2

Bibliographic Details
Parent link:	Glass and Ceramics.— .— New York: Springer Science+Business Media LLC. Vol. 81, iss. 1-2.— 2024.— P. 17-23
Other Authors:	Sharafeev Sh. M. Sharif Mnirovich, Kazmina O. V. Olga Viktorovna, Gubanov A. V. Aleksandr Valerjevich, Kutugin V. A. Viktor Aleksandrovich, Polushin G. V. Gleb Vladimirovich
Summary:	Title screen Refractory and heat-resistant materials with a coarse-grained and large-porous structure were obtained using silica glass suspensions with mullite, spinel, alumina, and quartz fillers. The influence of sintering temperature on the phase composition, structure, porosity, and density of the materials were studied. Although the strength of the ceramics was found to increase in the temperature range 1300 – 1400°C, it decreases at 1500 – 1600°C due to the crystallization of the silica glass. Composites in the silica glass-alumina system were found to have the most stable strength characteristics Текстовый файл AM_Agreement
Language:	English
Published:	2024
Subjects:	highly concentrated binder suspensions silica glass refractory filler mullite spinel quartz alumina электронный ресурс труды учёных ТПУ
Online Access:	https://doi.org/10.1007/s10717-024-00652-7
Format:	Electronic Book Chapter
KOHA link:	https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=677974

Similar Items

Rheological Characteristics of Highly Concentrated Silica Glass Suspensions for 3D Printing of Refractories; Refractories and Industrial Ceramics; Vol. 64, iss. 6
Published: (2024)

Structure and properties of 3D printed porous Al2O3-SiO2 refractories based on silica glass binder with a complex water-polymer plasticizer/pore-former; Ceramics International; Vol. 51, iss. 14
Published: (2025)

Mullite-Corundum Materials Based on Mullite Binder Resistant to High-Temperature Deformation; Refractories and Industrial Ceramics; Vol. 58, iss. 6
Published: (2018)

Porous articles with rigid structure based on natural amorphous silica; Glass and Ceramics; Vol. 75, iss. 1-2
Published: (2018)

The effect of chromium concentration on luminescent properties of alkali-alumina-borate glass-ceramics; Journal of Non-Crystalline Solids; Vol. 521
Published: (2019)

Influence of the Tb3+ concentration on the luminescent properties of high silica glass; Optical Materials; Vol. 86
Published: (2018)

Effect of Modifying Additions on Synthesis and Properties of Cordierite-Mullite Ceramic from Kazakhstan Resources; Refractories and Industrial Ceramics; Vol. 58, iss. 2
Published: (2017)

Corundum Refractory Material in Alumina-Binder Resistant to High-Temperature Deformation; Refractories and Industrial Ceramics; Vol. 59, iss. 1
Published: (2018)

Technological aspects of borate glass–ceramics preparation doped with transition metals for optoelectronic applications; Journal of Non-Crystalline Solids; Vol. 570
Published: (2021)

Spectroscopic properties of chromium/antimony co-doped alkali-alumina-borate glass-ceramics; Optical Materials; Vol. 106
Published: (2020)

Radiation-induced processes in alkali-alumina-borate glass-ceramics doped with Cr3+ ions; Journal of Non-Crystalline Solids; Vol. 534
Published: (2020)

Lithium concentration effect on crystallization kinetics and spectral properties of Cr-doped Li2O-K2O-Al2O3-B2O3 glass-ceramics; Ceramics International; Vol. 49, iss. 12
Published: (2023)

Influence of Silica Fume on the Production Process and Properties of Porous Glass Composite; Известия вузов. Химия и химическая технология; Т. 66, вып. 1
by: Skirdin K. V. Kirill Vyacheslavovich
Published: (2023)

Properties of Hollow Glass Microspheres Obtained in a Propane-Air Torch; Glass and Ceramics; Vol. 80
Published: (2023)

Metal-Ceramic Nanocomosite for Radiation Shielding of Electronics; Energy Fluxes and Radiation Effects (EFRE-2020 online)
Published: (2020)

Structure Formation in Cast Spinelide-Pyroxene Glass-Ceramic Materials under Non-Equilibrium Crystallization; Glass and Ceramics; Vol. 78, iss. 3-4
by: Ignatova A. M. Anna Mikhaylovna
Published: (2021)

Studying the Structural Phase Composition and Optical and Mechanical Properties of Al–Si–Re–O Coatings Deposited on Quartz Glass; Russian Physics Journal; Vol. 67, iss. 4
Published: (2024)

Temperature regimes for obtaining granular material for foamed crystal glass materials as a function of the batch composition; Glass and Ceramics; Vol. 66, N 5-6
Published: (2009)

Low-Fired Electrotechnical Porcelain with Diopside Additives; Glass and Ceramics; Vol. 78, iss. 1-2
by: Vereshchagin (Vereschagin, Vereshagin) V. I. Vladimir Ivanovich
Published: (2021)

The peculiar alterations of the optical and mechanical characteristics of the quartz glass plates with a reinforcing coating under the collision with a hyper-velocity flux of microparticles; Acta Astronautica; Vol. 216
Published: (2024)

Overview of achievements in the refractory industry; Journal of Economics and Social Sciences; № 16
by: Tolegenov D. T. Dias
Published: (2020)

Batch pulping on the basis of natural substandard siliceous materials; Bulletin of the Tomsk Polytechnic University; Vol. 310, № 1
by: Krasheninnikova N. S. Nadia Sergeevna
Published: (2007)

Ancient Glass of South Asia Archaeology, Ethnography and Global Connections /
Published: (2021)

Features of phase formation of mullite-corundum materials in mixtures of kaolin with a fluoriding component; Refractories and Industrial Ceramics; Vol. 51, iss. 3
Published: (2010)

Synthesis and Properties of Silicon-Carbide-Modified Porous Glass Composite; Glass and Ceramics; Vol. 77, iss. 3-4
by: Semenova V. I. Valeriya Igorevna
Published: (2020)

Effect of a Coating Deposited on Foam Glass on the Ability to Absorb High-Frequency Electromagnetic Radiation; Glass and Ceramics; Vol. 75, iss. 5-6
Published: (2018)

Physical, Mechanical, and Electrophysical Properties of Porous Glass Composite with Silicon Carbide Additives; Glass and Ceramics; Vol. 78, iss. 3-4
Published: (2021)

Magnetite’s Influence on the Radio-Absorbing Properties of a Porous Glass Composite at High-Frequencies; Glass and Ceramics; Vol. 79, iss. 5-6
by: Skirdin K. V. Kirill Vyacheslavovich
Published: (2022)

Nanodispersed systems in processing building materials and units; Bulletin of the Tomsk Polytechnic University; Vol. 311, № 3
by: Lotov V. A. Vasiliy Agafonovich
Published: (2007)

Refractory ceramics based on magnesium–aluminate spinel and periclase of the Satka deposit; Materials Chemistry and Physics; Vol. 313
Published: (2024)

The different fractal structure of oxide nanopowders depending on the method of production; Solid State Phenomena; Vol. 271
Published: (2018)

Physico-chemical processes of alkaline activation of silica during heat treatment in the SiO2-NaOH-H2O system; Известия высших учебных заведений. Серия: Химия и химическая технология; Т. 67, вып. 4
Published: (2024)

Оценка степени кристалличности кварцевого сырья; Известия Томского политехнического университета [Известия ТПУ]. Инжиниринг георесурсов; Т. 334, № 8
Published: (2023)

Mixed-halide CsPb(BrxI1-x)3 perovskite nanocrystals in borogermanate glass-ceramics; Ceramics International; Vol. 50, iss. 13, Pt. B
Published: (2024)

Study of Shear Properties of Nanoparticle Suspensions; Procedia Chemistry; Vol. 10 : Chemistry and Chemical Engineering in XXI century
Published: (2014)

Evolution of Porous Structure and Texture in Nanoporous SiO[2]/Al[2]O[3] Materials during Calcination; AIP Conference Proceedings; Vol. 1783 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016
by: Glazkova E. A. Elena
Published: (2016)

Prediction of Properties of Cast Spinelide-Pyroxene Glass-Ceramic Materials through Parameters of Spherulite-Mesh Structure Model; Inorganic Materials: Applied Research; Vol. 11, iss. 4
by: Ignatova A. M. Anna Mikhaylovna
Published: (2020)

Modeling the effect of the addition of alumina on structural characteristics and tensile deformation response of aluminosilicate glasses; Ceramics International; Vol. 46, iss. 13
Published: (2020)

Valence state conversion of Mn ions in Li2O–ZnO-GeO2 glass-ceramics: Spectral, structural, ESR and XRF studies; Ceramics International; Vol. 50, iss. 11, Pt. B
Published: (2024)

Multilayered converters based on ZrO2-Y2O3/MgAl2O4 ceramics doped with Eu/Ce fabricated by SPS technique; Ceramics International; Vol. 51, iss. 1
Published: (2025)