Fracture resistance of the deposited metal under dynamic and cyclic loading; Structural Integrity and Life; Vol. 24, № 2

Fracture resistance of the deposited metal under dynamic and cyclic loading; Structural Integrity and Life; Vol. 24, № 2

Bibliographic Details
Parent link:	Structural Integrity and Life.— .— Belgrad: Society for Structural Integrity and Life Vol. 24, № 2.— 2024.— P. 187-192
Other Authors:	Leshchinsky L. K. Leonid Konstantinovich, Ivanov V. P. Vitaly Petrovich, Lavrova E. V. Elena Vladimirovna, Ilyashchenko D. P. Dmitry Pavlovich, Verkhoturova E. V. Elena Viktorovna
Summary:	Title screen Analyses of experimental data are presented that enable the fracture resistance assessment of dynamically and cyclically loaded materials used for the manufacture and surfacing of rollers in continuous casting machines for beam blanks and crimping mill rollers. It has been noted that steels for manufacturing and surfacing of crimping rolls with different carbon content and alloying elements, differ in the determination fraction of the crack nucleation work in the integral value of the impact strength. The value of that fraction is much higher for corrosion-resistant steels of the Cr13 type which are also distinguished by high fracture resistance to cyclic loading. It is shown that the properties of these steels make it possible, along with the use of CCM rollers for surfacing, to recommend them for hardening the rollers in crimping mills. The possibility of an additional increase in the efficiency of the crimping rolls by eliminating uneven wear along the length of the barrel by surfacing a layer of Cr13 steel with a variable carbon content (0.10-0.25 %) is considered Текстовый файл
Language:	English
Published:	2024
Subjects:	fracture resistance deposited metal dynamic load impact strength fatigue crack электронный ресурс труды учёных ТПУ
Online Access:	https://doi.org/10.69644/ivk-2024-02-0187
Format:	Electronic Book Chapter
KOHA link:	https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=677012

Similar Items

Resistance of Heterogeneous Metal Compositions to Fracture under Dynamic and Cyclic Loads; Metals; Vol. 13, iss. 11
Published: (2023)

Technique of definition of cracking resistance characteristics of metal plates and envelopes of small thickness; Bulletin of the Tomsk Polytechnic University; Vol. 309, № 4
by: Solyanik A. S.
Published: (2006)

Acoustic emission study on the effect of notch shape and temperature on elastic energy release during impact testing of 17Mn1Si pipe steel; Engineering Fracture Mechanics; Vol. 210
Published: (2019)

The effect of crater creation on the fatigue strength and corrosion resistance of steels and titanium alloys irradiated by high-power pulsed ion beams; Surface and Coatings Technology; Vol. 158-159
by: Shulov V. A.
Published: (2002)

Research of crack initiation and propagation under loading for providing impact resilience of protective coating; Functional Materials; Vol. 26, № 1
Published: (2019)

Multiscale Fracture of Ti-Al-N Coatings under Uniaxial Tension; Physical Mesomechanics; Vol. 24, iss. 2
Published: (2021)

Synergy of crack closure, near-tip residual stress and crack-tip blunting in crack growth under periodic overloads – A fractographic study; International Journal of Fatigue; Vol. 93, pt. 1
Published: (2016)

Noisiness of the video amplifier made by the cascode circuit with dynamic load; Bulletin of the Tomsk Polytechnic University; Vol. 311, № 4 : Power engineering
by: Maslennikov V. N.
Published: (2007)

The role of notch tip shape and radius on deformation mechanisms of 12Cr1MoV steel under impact loading. Part 2. Influence of strain localization on fracture and numeric simulations; Fatigue and Fracture of Engineering Materials and Structures; Vol. 40, iss. 11
Published: (2017)

Nonlinear Mechanical Effect of Free Water on the Dynamic Compressive Strength and Fracture of High-Strength Concrete; Materials; Vol. 14, iss. 14
by: Shilko E. V. Evgeny Viktorovich
Published: (2021)

Development and Study of the Properties of Impact-Resistant Ceramic Nanocomposite Coatings for Silicon; Glass and Ceramics; Vol. 77, iss. 3-4
Published: (2020)

Combined action of crack closure and residual stress under periodic overloads: A fractographic analysis; International Journal of Fatigue; Vol. 82, pt. 3
Published: (2016)

Prediction of deposit oil-bearing capacity of the Tutleym series within the Krasnoleninsk arc (the Western Siberia); Bulletin of the Tomsk Polytechnic University; Vol. 310, № 1
by: Abrosimova О. О.
Published: (2007)

Brittle fracture strength analysis for reactor pressure vessel of VVER-1000 reactor unit; Journal of Economics and Social Sciences; № 16
Published: (2020)

Structural Changes in Steel 12GBA During Warm Rolling and Resistance to Brittle Fracture at Negative Temperatures; Metal Science and Heat Treatment; Vol. 59, iss. 11-12
Published: (2018)

Algorithm of fatigue crack detection and determination of its tip position in optical images; Optoelectronics, Instrumentation and Data Processing; Vol. 53, iss. 3
Published: (2017)

Scale levels of quasi-static and dynamic fracture behavior of Ti-6Al-4V parts built by various additive manufacturing methods; Theoretical and Applied Fracture Mechanics; Vol. 110
Published: (2020)

DIC Study of Fatigue Crack Growth after Single Overloads and Underloads; Procedia Structural Integrity; Vol. 5 : 2nd International Conference on Structural Integrity, ICSI 2017, 4-7 September 2017, Funchal, Madeira, Portugal
Published: (2017)

Influence of long-term operation on structure, fatigue durability and impact toughness of 09Mn2Si pipe steel; Procedia Structural Integrity; Vol. 5 : 2nd International Conference on Structural Integrity, ICSI 2017, 4-7 September 2017, Funchal, Madeira, Portugal
Published: (2017)

Low-Temperature Deformation and Fracture of Cr-Mn-N Stainless Steel: Tensile and Impact Bending Tests; Metals; Vol. 13, iss. 1
Published: (2023)

Dynamic resistance signal–based wear monitoring of resistance spot welding electrodes; International Journal of Advanced Manufacturing Technology; Vol. 133
Published: (2024)

Fractography, Fracture Toughness and Structural Turbulence Under Low-Temperature Shock Loading of a Nonequilibrium Titanium Alloy Ti-6Al-4V; Mechanics of Solids; Vol. 55, iss. 5
Published: (2020)

English for Shipbuilders (Английский язык для студентов кораблестроителей)
by: Дьяченко И. И.
Published: (Мурманск, МАУ, 2015)

Assessing Electrode Characteristics in Continuous Resistance Spot Welding of BH 340 Steel Based on Dynamic Resistance; Journal of Manufacturing and Materials Processing; Vol. 7, iss. 6
Published: (2023)

The Influence of Regimes of Thermomechanical Treatment on the Structural-Phase State, Mechanical Properties, and Fracture Toughness of Low-Alloy Steel API 5L Grade X52; Russian Physics Journal; Vol. 61, iss. 11
by: Derevyagina L. S. Lyudmila Sergeevna
Published: (2019)

High-strength gypsum binder with improved water-resistance coefficient derived from industrial wastes; Waste Management & Research; Vol. 43, iss. 2
Published: (2024)

Анализ и выбор тампонажной смеси, устойчивой к динамическим нагрузкам, с целью повышения качества герметичности крепи в затрубном пространстве; Известия Томского политехнического университета [Известия ТПУ]. Инжиниринг георесурсов; Т. 333, № 11
Published: (2022)

An Automated Optical Strain Measurement System for Estimating Polymer Degradation under Fatigue Testing; Sensors; Vol. 22, iss. 16
Published: (2022)

Design of Wear-Resistant UHMWPE-Based Composites Loaded with Wollastonite Microfibers Treated with Various Silane Coupling Agents; Applied Sciences; Vol. 10, iss. 13
Published: (2020)

Temperature Effect on Deformation and Fracture Mechanisms under Impact Loading of 17Mn1Si Steel with Explicit Accounting Structural Heterogeneity; Procedia Engineering; Vol. 187 : TransBaltica 2017: Transportation science and technology
Published: (2017)

Impact toughness of nanocomposite materials filled with fullerene c60particles; Composites: Mechanics, Computations, Applications: An International Journal; Vol. 9, iss. 2
Published: (2018)

Strengthening elements to increase fatigue strength of mine hoisting machine steel structures; Metalurgija; Vol. 61, No. 1
Published: (2022)

Evaluation of the reliability of resistance spot welding control via on-line monitoring of dynamic resistance; Journal of Intelligent Manufacturing; Vol. XX, iss. XX
Published: (2022)

Influence of long-term cold climate operation on structure, fatigue durability and impact toughness of 09Mn2Si pipe steel; Engineering Failure Analysis; Vol. 102
Published: (2019)

Use of reinforcing elements to improve fatigue strength of steel structures of mine hoisting machines (MHM); Metalurgija; Vol. 59, № 1
Published: (2020)

Аналитическое исследование временной прочностной характеристики горной породы при резании-скалывании резцами PDC; Известия Томского политехнического университета [Известия ТПУ]; Т. 325, № 1 : Ресурсы планеты
by: Борисов К. И. Константин Иванович
Published: (2014)

Study of a Methodology for Calculating Contact Stresses during Blade Processing of Structural Steel; Metals; Vol. 13, iss. 12
Published: (2023)

Effect of Ultrasonic Impact Treatment on Microstructure and Fatigue Life of 3D Printed Ti–6Al–4V Titanium Alloy; Physics of Metals and Metallography; Vol. 124, iss. 10
Published: (2023)

Influence of Ultrafine Particles on Structure, Mechanical Properties, and Strengthening of Ductile Cast Iron; Metals; Vol. 8, iss. 7
Published: (2018)

Analyzing patterns of heat generated by the tensile loading of steel rods containing discontinuity-like defects; International Journal of Damage Mechanics; Vol. 27, iss.6
by: Moyseychik E. Eugeny
Published: (2017)