Synergy of high-intensity chromium ion implantation and ion beam energy impact on the zirconium alloy surface; Journal of Applied Physics; Vol. 136, iss. 14

Synergy of high-intensity chromium ion implantation and ion beam energy impact on the zirconium alloy surface; Journal of Applied Physics; Vol. 136, iss. 14

Détails bibliographiques
Parent link:	Journal of Applied Physics.— .— New York: AIP Publishing Vol. 136, iss. 14.— 2024.— Article number 145903, 15 p.
Collectivité auteur:	National Research Tomsk Polytechnic University (570)
Autres auteurs:	Ryabchikov A. I. Aleksandr Ilyich, Korneva O. S. Olga Sergeevna, Bozhko I. A. Irina Aleksandrovna, Gurulev A. V. Aleksandr Valerjevich, Dektyarev S. V. Sergey Valentinovich, Ivanova A. I. Anna Ivanovna, Zaytsev Daniil Dmitrievich D. D.
Résumé:	Title screen The peculiarities and modes of material modification with high-intensity, high-power density ion beams on the irradiated surface are studied for the first time. Chromium ions are implanted into a zirconium alloy using a 25 kW/cm2, 450 μs beam at the pulse repetition rates within 8–35 pps. Every high-energy ion pulse impact is followed by ultrafast cooling of the surface due to heat removal into the target material. Three modes are studied at the temperatures of 580, 700, and 900 °C with an additional pulsed heating. An increase in the average target temperature from 580 to 700 °C within 1 h at the same pulse power density allows increasing the depth of chromium ion alloying from 1.5 to more than 7 μm. The use of ultrafast cooling of the Zr1%Nb alloy surface offers a grain size reduction from a few μm to approximately 50–250 nm, without any microstructural changes throughout the sample volume. An inhomogeneous chromium ion distribution over the target surface and depth is observed Текстовый файл
Langue:	anglais
Publié:	2024
Sujets:	электронный ресурс труды учёных ТПУ
Accès en ligne:	https://doi.org/10.1063/5.0214379
Format:	MixedMaterials Électronique Chapitre de livre
KOHA link:	https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=676886

Documents similaires

High-intensity low energy titanium ion implantation into zirconium alloy; Applied Surface Science; Vol. 439
Publié: (2018)

High-intensity chromium ion implantation into Zr-1Nb alloy; Surface and Coatings Technology; Vol. 383
Publié: (2020)

Features of titanium ion beams formation taking into account ion-electron emission realizing the synergy of high-intensity ion implantation and pulsed energy impact on the surface; Materials. Technologies. Design; Т. 5, № 4 (14)
par: D. O. Dimitry Olegovich
Publié: (2023)

Surface Modification of E110 Alloy by High-Intensity Low Ion Energy Cr Implantation; Surface Modification of Materials by Ion Beams (SMMIB-2019)
Publié: (2019)

High-Intensity Implantation of Metal Ions in Conditions of Minimizing Ion Sputtering of the Material Surface; Surface Modification of Materials by Ion Beams (SMMIB-2019)
Publié: (2019)

Modification of silicon under synergy of high-intensity implantation of titanium ions and energy influence of a high-power ion beam on a surface; Materials. Technologies. Design; Т. 6, № 1
Publié: (2024)

Study of the synergy effect of high-intensity aluminum ions implantation into titanium and energy impact on the surface; Materials. Technologies. Design; Т. 5, № 3 (13)
Publié: (2023)

Microstructure of Titanium Alloy Modified by High-Intensity Implantation of Low- and MediumEnergy Aluminum Ions; Surface Modification of Materials by Ion Beams (SMMIB-2019)
Publié: (2019)

Progress in High Intensity, Low Ion Energy Implantation Method Development; Surface Modification of Materials by Ion Beams (SMMIB-2019)
par: Ryabchikov A. I. Aleksandr Ilyich
Publié: (2019)

High Intensity low Aluminum Ion Energy Implantation into Titanium; Ion Implantation Technology (IIT 2018)
Publié: (2018)

Modification of Microstructure and Properties of Martensitic Stainless Steel by High-Intensity Implantation of Nitrogen Ions; Surface Modification of Materials by Ion Beams (SMMIB-2019)
Publié: (2019)

Simulation and experimental studies on the formation of high-power titanium ion beams for the synergy of ion implantation and energy impact on the surface; Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms; Vol. 533
Publié: (2022)

Impact of pulsed ion beams on the structure and properties of zirconium alloys; Перспективы развития фундаментальных наук
par: Beloglazova P. A. Polina Andreevna
Publié: (2013)

Microstructure of titanium alloy modified by high-intensity implantation of low- and high-energy aluminium ions; Surface and Coatings Technology; Vol. 391
Publié: (2020)

Influence of High-Intense Ion Pulses on Tungsten Surface Erosion; Surface Modification of Materials by Ion Beams (SMMIB-2019)
Publié: (2019)

High intensity, low ion energy implantation of nitrogen in AISI 5140 alloy steel; Surface and Coatings Technology; Vol. 355
Publié: (2018)

High-Intensity Implantation With an Ion Beam's Energy Impact on Materials; IEEE Transactions on Plasma Science; Vol. 49, iss. 9
par: Ryabchikov A. I. Aleksandr Ilyich
Publié: (2021)

Temperature Gradients in the Irradiated Targets During High-Intensity Implantation and Their Influence on Ion-Modified Layer Properties; Surface Modification of Materials by Ion Beams (SMMIB-2019)
Publié: (2019)

Structure and phase composition of tungsten alloys modified by compression plasma flows and high-intense pulsed ion beam impacts; Applied Surface Science; Vol. 491
Publié: (2019)

Formation of nanoscale carbon structures in the surface layer of metals under the impact of high intensity ion beam; Applied Surface Science; Vol. 310
Publié: (2014)

Features of High-Intensity Implantation of Chromium into Zr1%Nb Alloy Using a High-Power Density Repetitively-Pulsed Ion Beam; Journal of Surface Investigation: X-ray, Synchrotron and Neutron Techniques; Vol. 19, iss. 4
Publié: (2025)

High-intensity ion beams with submillisecond duration for synergistic of ion implantation and energy impact on the surface; Energy Fluxes and Radiation Effects (EFRE); International Conference on Modification of Materials with Particle Beams and Plasma Flows (16th CMM)
Publié: (2022)

The high intensity implantation of aluminium ions into titanium; Korus 2004; V. 3
Publié: (2004)

High-Current Pulsed Induction Plasma Source for Generation of High Intensity Ion Beams of Various Gases; Surface Modification of Materials by Ion Beams (SMMIB-2019)
Publié: (2019)

High-Intensity Titanium Ion Implantation into Aluminum under Conditions of Repetitively-Pulsed Energy Impact of a Beam on the Surface; Russian Physics Journal; Vol. 67, iss. 5
par: Zaytsev D. D. Daniil Dmitrievich
Publié: (2024)

Progress in low energy high intensity ion implantation method development; Surface and Coatings Technology; Vol. 388
par: Ryabchikov A. I. Aleksandr Ilyich
Publié: (2020)

Temperature gradients in targets at low energy high-intensity ion implantation; Surface and Coatings Technology; Vol. 389
Publié: (2020)

Hydrogen Interaction with Deep Surface Modified Zr-1Nb Alloy by High Intensity Ti Ion Implantation; Metals; Vol. 8, iss. 12
Publié: (2018)

Influence of Surface Sputtering during High-Intensity, Hot Ion Implantation on Deep Alloying of Martensitic Stainless Steel; Metals; Vol. 13 - iss. 9
Publié: (2023)

The Structural Thermal Stability of the Fe80Si7 B13 Alloys Under the Irradiation of High-Intensity Pulsed Ion Beam; Surface Modification of Materials by Ion Beams (SMMIB-2019)
Publié: (2019)

Investigation of High-Intensity Implantation of Titanium Ions into Silicon under Conditions of Beam Energy Impact on the Surface; Journal of Surface Investigation. X-ray, Synchrotron and Neutron Techniques; Vol. 18, iss. 5
Publié: (2024)

High Intensity Implantation of Aluminium Ions into Titanium; 7 International conference on modification of materials with particle beams and plasma flows
Publié: (2004)

High intensity metal ion beam generation; Vacuum; Vol. 143
Publié: (2017)

Thermal-Diffusion Model of Ion Implantation with Soret and Dufour Effects; Surface Modification of Materials by Ion Beams (SMMIB-2019)
par: Chepak-Gizbrekht M. V. Mariya Vladimirovna
Publié: (2019)

The Influence of Metal Surface Topography on Ablation Behavior During Intense Pulsed Ion Beam Irradiation; Surface Modification of Materials by Ion Beams (SMMIB-2019)
Publié: (2019)

Investigation of Regularities of High-Intensity Ion Implantation in Combination with Subsequent Exposure to the Surface of a High-Current Electron Beam; Energy Fluxes and Radiation Effects (EFRE-2020 online)
Publié: (2020)

Modification of hard alloy by the action of high power ion beams; Surface and Coatings Technology; Vol. 206
Publié: (2011)

Surface modification of Al by high-intensity low-energy Ti-ion implantation: Microstructure, mechanical and tribological properties; Surface and Coatings Technology; Vol. 372
Publié: (2019)

Investigation of Magnetically Insulated Diode for Intense Pulsed Ion Beam Generation for Materials Research; Surface Modification of Materials by Ion Beams (SMMIB-2019)
Publié: (2019)

Influence of Chromium Coating on Microstructure Changes in Zirconium Alloy E110 Under High-Temperature Hydrogenation and Kr Ion Irradiation; Coatings; Vol. 15, iss. 2
Publié: (2025)