Influence of Binders on the Properties of Pellets Based on Wood Waste; Coke and Chemistry; Vol. 67, iss. 2
| Parent link: | Coke and Chemistry.— .— New York: Springer Science+Business Media LLC. Vol. 67, iss. 2.— 2024.— P. 104-111 |
|---|---|
| Corporate Author: | Томский политехнический университет (570) |
| Other Authors: | Vershinina K. Yu. Kseniya Yurievna, Dorokhov V. V. Vadim Valerjevich, Nyashina G. S. Galina Sergeevna, Romanov D. S. Daniil Sergeevich |
| Summary: | Title screen The influence of binders on the strength of sawdust pellets is investigated. Two groups of binders are considered: commercial products (starch and lignin); and those derived from low-grade fuels and waste (coal sludge, peat, and sunflower cake). All the additives considered improve pellet strength under vibration by 3.9–8.0%. Under impact, none of the pellets disintegrated completely. The impact strength was greatest for sawdust-based pellets with no additives. The use of special additives reduces the hygroscopic properties by 0.9–1.3%. The experimental results show that pellets containing peat are dense and wear-resistant and withstand impact well, but they are inclined to absorb atmospheric moisture. The best binder concentration is 5 wt %; that most improves pellet behavior. With 10 wt % binder, the pellet quality is either practically unchanged or impaired Текстовый файл AM_Agreement |
| Language: | English |
| Published: |
2024
|
| Subjects: | |
| Online Access: | https://doi.org/10.3103/S1068364X24701291 |
| Format: | Electronic Book Chapter |
| KOHA link: | https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=675901 |
Similar Items
Influence of Manufacturing Pressure on Properties of Sawdust–Lignite Pellets; Coke and Chemistry; Vol. 68, iss. 4
by: Dorokhov V. V. Vadim Valerjevich
Published: (2025)
by: Dorokhov V. V. Vadim Valerjevich
Published: (2025)
Combustion and mechanical properties of pellets from biomass and industrial waste; Renewable Energy; Vol. 228
Published: (2024)
Published: (2024)
High-strength gypsum binder with improved water-resistance coefficient derived from industrial wastes; Waste Management & Research; Vol. 43, iss. 2
Published: (2024)
Published: (2024)
Wood pellets with waste: energy, environmental and mechanical aspects; Renewable Energy; Vol. 250
Published: (2025)
Published: (2025)
Effects of the type and proportion of a binder on the quality and combustion of fuel pellets; Biomass and Bioenergy; Vol. 199
Published: (2025)
Published: (2025)
Physical characteristics and combustion behavior of pellets from sawdust and refuse-derived fuel; Fuel; Vol. 377
Published: (2024)
Published: (2024)
Structure and properties of 3D printed porous Al2O3-SiO2 refractories based on silica glass binder with a complex water-polymer plasticizer/pore-former; Ceramics International; Vol. 51, iss. 14
Published: (2025)
Published: (2025)
Influence of liquid products formed at microwave pyrolysis of solid organic raw materials on process duration and energy consumption; Energy Conversion and Management; Vol. 343
Published: (2025)
Published: (2025)
Combustion stages of waste-derived blends burned as pellets, layers, and droplets of slurry; Energy; Vol. 251
Published: (2022)
Published: (2022)
Ignition and Combustion of Mixed Fuels Based on Coal and Wood under Different Conditions of Thermal Influence; Solid Fuel Chemistry; Vol. 58, iss. 1
Published: (2024)
Published: (2024)
Benefits of Slurry Fuels Based on Industrial Wastes; Coke and Chemistry; Vol. 62, iss. 9
Published: (2019)
Published: (2019)
Проблема использования отходов лакокрасочных материалов и их утилизация; Известия Томского политехнического университета [Известия ТПУ]. Инжиниринг георесурсов; Т. 331, № 9
Published: (2020)
Published: (2020)
Ignition, Combustion, and Mechanical Properties of Briquettes from Coal Slime and Oil Waste, Biomass, Peat and Starch; Waste and Biomass Valorization; Vol. 14, iss. 2
Published: (2023)
Published: (2023)
Microwave Pyrolysis of Biomass in Steam; Coke and Chemistry; Vol. 65, iss. 10
by: Kurgankina M. A. Margarita Aleksandrovna
Published: (2022)
by: Kurgankina M. A. Margarita Aleksandrovna
Published: (2022)
Impact of oil additives on the physical and combustion characteristics of pellets from biomass and cardboard; Biomass and Bioenergy; Vol. 213
Published: (2026)
Published: (2026)
Ash Composition in the Combustion of Promising Slurry Fuels; Coke and Chemistry; Vol. 63, iss. 3
Published: (2020)
Published: (2020)
The Influence of Regimes of Thermomechanical Treatment on the Structural-Phase State, Mechanical Properties, and Fracture Toughness of Low-Alloy Steel API 5L Grade X52; Russian Physics Journal; Vol. 61, iss. 11
by: Derevyagina L. S. Lyudmila Sergeevna
Published: (2019)
by: Derevyagina L. S. Lyudmila Sergeevna
Published: (2019)
Bio-graphene activated carbon of sago waste as a potential catalyst for crude coconut oil combustion: An experimental and quantum mechanics based study; Results in Chemistry; Vol. 15
by: H. Y. Hendry
Published: (2025)
by: H. Y. Hendry
Published: (2025)
Features of the processes of heat and mass transfer when drying a large thickness layer of wood biomass; Renewable Energy; Vol. 169
Published: (2021)
Published: (2021)
Relative combustion efficiency of composite fuels based on of wood processing and oil production wastes; Energy; Vol. 169
by: Vershinina K. Yu. Kseniya Yurievna
Published: (2019)
by: Vershinina K. Yu. Kseniya Yurievna
Published: (2019)
Features of change of mechanical properties of precipitation hardening alloy 47ХНМ at hardening and ageing; Bulletin of the Tomsk Polytechnic University; Vol. 311, № 2
Published: (2007)
Published: (2007)
Production of Briquetted Semicoke from Wood Waste by Multistep Low-Temperature Pyrolysis; Coke and Chemistry; Vol. 63, iss. 12
Published: (2020)
Published: (2020)
Gypsum and high quality binders derived from water treatment sediments and spent sulfuric acid: Chemical engineering and environmental aspects; Chemical Engineering Research and Design; Vol. 184
Published: (2022)
Published: (2022)
Mullite-Corundum Materials Based on Mullite Binder Resistant to High-Temperature Deformation; Refractories and Industrial Ceramics; Vol. 58, iss. 6
Published: (2018)
Published: (2018)
High-strength fuel pellets made of flour milling and coal slack wastes; Energy; Vol. 243
Published: (2022)
Published: (2022)
Вторичные ресурсы в производстве композиционных строительных материалов на основе цемента; Известия Томского политехнического университета [Известия ТПУ]. Инжиниринг георесурсов; Т. 334, № 10
Published: (2023)
Published: (2023)
Research of alternative feedstock application ways for pyrolysis; Recent Achievements and Prospects of Innovations and Technologies; Iss. 3 : Proceedings of the XIII All-Russian Research-to-Practice Conference of Students, Postgraduates and Young Scientists, Kerch, April 22, 2024
by: Alina A. V. Anna Vladimirovna
Published: (2024)
by: Alina A. V. Anna Vladimirovna
Published: (2024)
Thermal analyses of uniformly heated fuel pin cell, inverted cell, and dual surface cooled cell geometries using comsol multi-physics; Научная инициатива иностранных студентов и аспирантов
by: Odii Ch. J. Christopher Joseph
Published: (2025)
by: Odii Ch. J. Christopher Joseph
Published: (2025)
Комплексные добавки на основе вторичных ресурсов для модификации цементных композиций; Известия Томского политехнического университета [Известия ТПУ]. Инжиниринг георесурсов; Т. 334, № 1
by: Копаница Н. О. Наталья Олеговна
Published: (2023)
by: Копаница Н. О. Наталья Олеговна
Published: (2023)
Corundum Refractory Material in Alumina-Binder Resistant to High-Temperature Deformation; Refractories and Industrial Ceramics; Vol. 59, iss. 1
Published: (2018)
Published: (2018)
Influence of anisotropy properties and structural inhomogeneity on elasticity and fracture of titanium alloys produced by electron-beam melting; International Journal of Advanced Manufacturing Technology; Vol. 135
Published: (2025)
Published: (2025)
Experimental research into the ignition and combustion characteristics of slurry fuels based on dry and wet coal processing waste; Journal of the Energy Institute; Vol. 97
Published: (2021)
Published: (2021)
Energy and environmental characteristics of coal and biocomponents co-combustion; Energy; Vol. 340
Published: (2025)
Published: (2025)
Influence of Refractory Fillers on the Properties of Ceramics Based on Highly Concentrated Silica Glass Suspensions; Glass and Ceramics; Vol. 81, iss. 1-2
Published: (2024)
Published: (2024)
The effect of co-combustion of waste from flour milling and highly mineralized peat on sintering of the ash residue; Energy; Vol. 196
Published: (2020)
Published: (2020)
Ignition and Emission Characteristics of Waste Tires Pyrolysis Char Co-Combustion with Peat and Sawdust; Energies; Vol. 16, iss. 10
Published: (2023)
Published: (2023)
Effects of additives on low temperature properties of motor oils; Химия и химическая технология в XXI веке; Т. 2
by: Murtala H. A.
Published: (2025)
by: Murtala H. A.
Published: (2025)
Structural and Electromagnetic Properties of Lithium Ferrite Manufactured by Extrusion Printing; Russian Physics Journal; Vol. 67, iss. 7
Published: (2024)
Published: (2024)
Justification of the Reduction Possibility of Sulfur Oxides and Fly Ash Emissions during Co-Combustion of Coal and Waste from Woodworking Enterprises; Applied Sciences; Vol. 11, iss. 24
Published: (2021)
Published: (2021)
Fracture resistance of the deposited metal under dynamic and cyclic loading; Structural Integrity and Life; Vol. 24, № 2
Published: (2024)
Published: (2024)
Similar Items
-
Influence of Manufacturing Pressure on Properties of Sawdust–Lignite Pellets; Coke and Chemistry; Vol. 68, iss. 4
by: Dorokhov V. V. Vadim Valerjevich
Published: (2025) -
Combustion and mechanical properties of pellets from biomass and industrial waste; Renewable Energy; Vol. 228
Published: (2024) -
High-strength gypsum binder with improved water-resistance coefficient derived from industrial wastes; Waste Management & Research; Vol. 43, iss. 2
Published: (2024) -
Wood pellets with waste: energy, environmental and mechanical aspects; Renewable Energy; Vol. 250
Published: (2025) -
Effects of the type and proportion of a binder on the quality and combustion of fuel pellets; Biomass and Bioenergy; Vol. 199
Published: (2025)