Wetting, droplet evaporation and corrosion behavior of various composite and textured materials; Ceramics International; Vol. 50, iss. 11

Chi tiết về thư mục
Parent link:Ceramics International.— .— Amsterdam: Elsevier Science Publishing Company Inc.
Vol. 50, iss. 11.— 2024.— P. 19269-19282
Tác giả của công ty: Томский политехнический университет (570)
Tác giả khác: Misyura S. Ya. Sergey Yakovlevich, Morozov V. S. Vladimir Sergeevich, Orlova E. G. Evgeniya Georgievna, Andryushchenko V. A. Vladimir Andreevich
Tóm tắt:Title screen
Experimental studies were conducted on the evaporation rate of a droplet located on the surfaces of various composite and textured materials with different wettability at varying surface temperatures. The maximum droplet evaporation rate was recorded on a textured Cu–SiC composite material with superhydrophilic properties. The minimum droplet evaporation rate corresponded to a superhydrophobic AlMg3 substrate obtained using laser texturing with subsequent hydrophobization procedure. An increase in surface temperature led to a significant deterioration of hydrophobicity for a superhydrophobic substrate and a deterioration of hydrophilicity for a superhydrophilic substrate. As a result, with increasing temperature, the influence of the droplet geometry determined by surface wettability on the droplet evaporation rate for these substrates sharply decreases. Advancing and receding dynamic contact angles, as well as contact angle hysteresis were obtained on all studied substrates. It is generally accepted that a hydrophobic surface exhibits less contact angle hysteresis than a hydrophilic one. However, Cu-SiС composite substrate with a textured hydrophobic surface exhibited the opposite behavior. The contact angle hysteresis on the hydrophobic textured surface was found to be four times higher than that on the hydrophilic polished one. A mechanism was proposed that explains the high contact angle hysteresis and four hysteresis time modes. The minimum hysteresis value corresponded to the superhydrophobic AlMg3 substrate. Anti-corrosion properties were studied for all substrates under consideration. The minimum corrosion current corresponded to a copper substrate with a graphene coating, as well as a superhydrophobic AlMg3 substrate. For a given substrate, there are two corrosion modes with a three-fold difference in the corrosion current. In addition, the wettability behavior of different surfaces was examined using molecular dynamics simulations. The simulation results were found to be consistent with the experimental data.
Текстовый файл
AM_Agreement
Ngôn ngữ:Tiếng Anh
Được phát hành: 2024
Những chủ đề:
Truy cập trực tuyến:https://doi.org/10.1016/j.ceramint.2024.03.026
Định dạng: Điện tử Chương của sách
KOHA link:https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=673874

MARC

LEADER 00000naa0a2200000 4500
001 673874
005 20260727160321.0
090 |a 673874 
100 |a 20240801d2024 k||y0rusy50 ba 
101 0 |a eng 
102 |a NL 
135 |a drcn ---uucaa 
181 0 |a i   |b  e  
182 0 |a b 
183 0 |a cr  |2 RDAcarrier 
200 1 |a Wetting, droplet evaporation and corrosion behavior of various composite and textured materials  |f S. Y. Misyura, V. S. Morozov, E. G. Orlova, V. A. Andryushchenko 
203 |a Текст  |b визуальный  |c электронный 
283 |a online_resource  |2 RDAcarrier 
300 |a Title screen 
320 |a References: 85 tit. 
330 |a Experimental studies were conducted on the evaporation rate of a droplet located on the surfaces of various composite and textured materials with different wettability at varying surface temperatures. The maximum droplet evaporation rate was recorded on a textured Cu–SiC composite material with superhydrophilic properties. The minimum droplet evaporation rate corresponded to a superhydrophobic AlMg3 substrate obtained using laser texturing with subsequent hydrophobization procedure. An increase in surface temperature led to a significant deterioration of hydrophobicity for a superhydrophobic substrate and a deterioration of hydrophilicity for a superhydrophilic substrate. As a result, with increasing temperature, the influence of the droplet geometry determined by surface wettability on the droplet evaporation rate for these substrates sharply decreases. Advancing and receding dynamic contact angles, as well as contact angle hysteresis were obtained on all studied substrates. It is generally accepted that a hydrophobic surface exhibits less contact angle hysteresis than a hydrophilic one. However, Cu-SiС composite substrate with a textured hydrophobic surface exhibited the opposite behavior. The contact angle hysteresis on the hydrophobic textured surface was found to be four times higher than that on the hydrophilic polished one. A mechanism was proposed that explains the high contact angle hysteresis and four hysteresis time modes. The minimum hysteresis value corresponded to the superhydrophobic AlMg3 substrate. Anti-corrosion properties were studied for all substrates under consideration. The minimum corrosion current corresponded to a copper substrate with a graphene coating, as well as a superhydrophobic AlMg3 substrate. For a given substrate, there are two corrosion modes with a three-fold difference in the corrosion current. In addition, the wettability behavior of different surfaces was examined using molecular dynamics simulations. The simulation results were found to be consistent with the experimental data. 
336 |a Текстовый файл 
371 0 |a AM_Agreement 
461 1 |t Ceramics International  |c Amsterdam  |n Elsevier Science Publishing Company Inc. 
463 1 |t Vol. 50, iss. 11  |v P. 19269-19282  |d 2024 
610 1 |a электронный ресурс 
610 1 |a труды учёных ТПУ 
610 1 |a composite material 
610 1 |a corrosion 
610 1 |a wettability 
610 1 |a contact angle hysteresis 
610 1 |a evaporation rate 
701 1 |a Misyura  |b S. Ya.  |c specialist in the field of power engineering  |c leading researcher of Tomsk Polytechnic University, candidate of technical sciences  |f 1964-  |g Sergey Yakovlevich  |9 21039 
701 1 |a Morozov  |b V. S.  |g Vladimir Sergeevich 
701 1 |a Orlova  |b E. G.  |c specialist in the field of thermal engineering  |c Associate Professor of Tomsk Polytechnic University, Candidate of Physical and Mathematical Sciences  |f 1991-  |g Evgeniya Georgievna  |9 17697 
701 1 |a Andryushchenko  |b V. A.  |g Vladimir Andreevich 
712 0 2 |a Томский политехнический университет  |c 1991-  |9 26305  |4 570 
801 0 |a RU  |b 63413507  |c 20240801 
850 |a 63413507 
856 4 |u https://doi.org/10.1016/j.ceramint.2024.03.026  |z https://doi.org/10.1016/j.ceramint.2024.03.026 
942 |c CR