Spatial stabilization of arc discharges in pulsed gas tungsten arc welding; Welding in the World; Vol. 68, iss. 9
| Parent link: | Welding in the World.— .— New York: Springer Science+Business Media LLC. Vol. 68, iss. 9.— 2024.— P. 2337–2350 |
|---|---|
| Korporativní autor: | Томский политехнический университет |
| Další autoři: | Skripko S. I. Skripko Stepan Igorevich, Gordynets A. S. Anton Sergeevich, Kiselev A. S. Aleksey Sergeevich, Slobodyan M. S. Mikhail Stepanovich |
| Shrnutí: | Title screen The aim of this study was to investigate the influence of the discharge parameters on the initial spatial instability of arcs after their initiation by the non-contact method in single-pulse electrode-negative gas tungsten arc welding. The investigated parameters were the Ppeak peak arc pressures, the T durations for achieving the peak arc pressure, and the Pfinal arc pressures at the end of current pulses. It was found that increasing the current amplitudes from 50 to 200 A enhanced mean both the Ppeak values (from 0.25 to 4.00 kPa) and the Pfinal levels (from 0.16 to 1.72 kPa). Enhancing the electrode diameters from 1.0 to 2.4 mm increased these experimental output parameters from 1.85 to 1.99 kPa and from 0.57 to 1.23 kPa, respectively, while they were decreased from 2.32 to 1.47 kPa and from 1.19 to 0.62 kPa after changing the sharpening angle of their tips from 30° to 90°. The period of the spatial instability of arc discharges was shortened from 14.4 to 5.8 ms by increasing the current amplitudes from 50 to 200 A. However, enhancing the electrode diameters from 1.0 to 2.4 mm increased its duration from 9.2 to 12.0 ms. It was also prolonged from 6.2 to 16.8 ms after changing the sharpening angle of the electrode tips from 30° up to 90°. The shortest duration of the arc stabilization period of 5 ms was observed when using the WL15 non-consumable electrode, while it was the longest (35 ms) for the WP one. Текстовый файл AM_Agreement |
| Jazyk: | angličtina |
| Vydáno: |
2024
|
| Témata: | |
| On-line přístup: | https://doi.org/10.1007/s40194-024-01781-x |
| Médium: | Elektronický zdroj Kapitola |
| KOHA link: | https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=672804 |
Podobné jednotky
Stability of MMA welding with protective coatings; Structural Integrity and Life; Vol. 20, № 1
Vydáno: (2020)
Vydáno: (2020)
Synthesis of Crystalline Tungsten Carbide Phases under the Influence of Atmospheric Electrical Arc Plasma on Tungsten Oxide; Journal of Superhard Materials; Vol. 43, iss. 3
Vydáno: (2021)
Vydáno: (2021)
The Effect of Energy Parameters of Power Sources on the Structure and Properties of Permanent Joints at Manual Arc Welding; Metals; Vol. 14, iss. 7
Autor: Ilyashchenko D. P. Dmitry Pavlovich
Vydáno: (2024)
Autor: Ilyashchenko D. P. Dmitry Pavlovich
Vydáno: (2024)
Influence of Nanostructured Powder Modifiers on the Structure of a Welding Bead; Advanced Materials Research; Vol. 872
Vydáno: (2014)
Vydáno: (2014)
Comparison of glow, arc, and magnetron direct current discharges; Resource-Efficient Technologies; No 2
Autor: Abrahamyan A. S.
Vydáno: (2019)
Autor: Abrahamyan A. S.
Vydáno: (2019)
Improvement of Arc Properties in GTAW of Aluminium Alloys; Materials Science Forum; Vol. 970 : Modern Problems in Materials Processing, Manufacturing, Testing and Quality Assurance II
Autor: Kiselev A. S. Aleksey Sergeevich
Vydáno: (2019)
Autor: Kiselev A. S. Aleksey Sergeevich
Vydáno: (2019)
Effect of Protective Coatings in Welded Constructions on Welding Stability and Electrode Metal Transfer into a Weld Pool in MMA; Solid State Phenomena; Vol. 303
Vydáno: (2020)
Vydáno: (2020)
New Developments to Reduce Arc Blow during SMAW of Pipelines; Materials Science Forum; Vol. 938 : Materials and Technologies in Mechanical Engineering
Vydáno: (2018)
Vydáno: (2018)
Vacuumless synthesis of tungsten carbide in a self-shielding atmospheric plasma of DC arc discharge; International Journal of Refractory Metals and Hard Materials; Vol. 93
Vydáno: (2020)
Vydáno: (2020)
Synthesis of Molybdenum Borides by the Impact of an A.C. Arc Discharge in Air; Journal of Engineering Physics and Thermophysics; Vol. 98, iss. 5
Vydáno: (2025)
Vydáno: (2025)
Characteristics of Temperature Field Distribution during Vacuum-Free Electric Arc Synthesis; Bulletin of the Russian Academy of Sciences: Physics; Vol. 89, Suppl. 2
Vydáno: (2026)
Vydáno: (2026)
Numerical Simulation of Thermal Processes in Welding with Pulsed Electrode Wire Feeding; Materials Science Forum; Vol. 927 : Materials and Processing Technology II
Vydáno: (2018)
Vydáno: (2018)
Initiation of an Arc Discharge in a Coaxial Magnetoplasma Accelerator; Russian Electrical Engineering; Vol. 89, iss. 3
Autor: Sivkov A. A. Aleksandr Anatolyevich
Vydáno: (2018)
Autor: Sivkov A. A. Aleksandr Anatolyevich
Vydáno: (2018)
Luders Deformation in Weld Joints; Steel in Translation; Vol. 48, No. 2
Vydáno: (2018)
Vydáno: (2018)
Modelling of fusion zone formation in shielded metal arc welding; Structural Integrity and Life; Vol. 20, № 3
Vydáno: (2020)
Vydáno: (2020)
Computer system for measurement of welding process parameters; Metrology for a Sustainable Development
Autor: Muravyov (Murav’ev) S. V. Sergey Vasilyevich
Vydáno: (2006)
Autor: Muravyov (Murav’ev) S. V. Sergey Vasilyevich
Vydáno: (2006)
Synthesis of titanium diboride by electric arc plasma in air; Materials Chemistry and Physics; Vol. 328
Vydáno: (2024)
Vydáno: (2024)
Synthesis of silicon carbide using an AC atmospheric-pressure arc reactor; Journal of Alloys and Compounds; Vol. 1003
Vydáno: (2024)
Vydáno: (2024)
Таблицы arc sin x arc tg x: пер. с англ.
Vydáno: (Москва, Вычислительный центр АН СССР, 1960)
Vydáno: (Москва, Вычислительный центр АН СССР, 1960)
Vacuum-free arc synthesis and characterization of crystalline molybdenum borides as instrumental material; Thermal Science and Engineering Progress; Vol. 67
Vydáno: (2025)
Vydáno: (2025)
In-situ carbide reinforced aluminium metal matrix composites obtained in pulsed arc plasma discharge; Ceramics International; Vol. 51, iss. 14
Vydáno: (2025)
Vydáno: (2025)
Arc-discharge Plasma Conversion of Asphaltene-rich Oil-industry Waste into Carbon Materials; Plasma Chemistry and Plasma Processing; Vol. 46, iss. 5
Vydáno: (2026)
Vydáno: (2026)
Synthesis of Mo2C-based material in DC arc discharge plasma under ambient air conditions; Materials Chemistry and Physics; Vol. 314
Vydáno: (2024)
Vydáno: (2024)
Direct Current Arc Plasma Synthesis of Superdisperced Powder Materials in "Tungsten-Carbon" System; Surface Modification of Materials by Ion Beams (SMMIB-2019)
Autor: Pak A. Ya. Aleksandr Yakovlevich
Vydáno: (2019)
Autor: Pak A. Ya. Aleksandr Yakovlevich
Vydáno: (2019)
Effect of Nitrogen Arc Discharge Plasma Treatment on Physicochemical Properties and Biocompatibility of PLA-Based Scaffolds; Polymers; Vol. 15, iss. 16
Vydáno: (2023)
Vydáno: (2023)
Hard Metal Waste Recycling by the Atmospheric Direct Current Arc Plasma; Energy Fluxes and Radiation Effects (EFRE-2020 online)
Autor: Kokorina A. I. Aleksandra Ivanovna
Vydáno: (2020)
Autor: Kokorina A. I. Aleksandra Ivanovna
Vydáno: (2020)
Влияние энергетики процесса безвакуумного электродугового синтеза на продукт переработки вольфрамового рудного концентрата; Известия Томского политехнического университета [Известия ТПУ]. Инжиниринг георесурсов; Т. 335, № 1
Vydáno: (2024)
Vydáno: (2024)
Oxidation Properties of High-Entropy Boride (Ti0.2Zr0.2Nb0.2Hf0.2Ta0.2)B2 Synthesized by DC Arc Discharge Plasma; Bulletin of the Russian Academy of Sciences: Physics; Vol. 89, Suppl. 2
Vydáno: (2025)
Vydáno: (2025)
Composite material WC1-x@C as a noble-metal-economic material for hydrogen evolution reaction; Journal of Alloys and Compounds; Vol. 834
Vydáno: (2020)
Vydáno: (2020)
Cubic SiC nanowire synthesis by DC arc discharge under ambient air conditions; Surface and Coatings Technology; Vol. 387
Vydáno: (2020)
Vydáno: (2020)
Heterogeneous Arc Discharge Plasma in a Magnetic Field; Russian Physics Journal; Vol. 60, iss. 7
Vydáno: (2017)
Vydáno: (2017)
Low-energy high-current plasma immersion implantation of nitrogen ions in plasma of non-self-sustained arc discharge with thermionic and hollow cathodes; Surface and Coatings Technology; Vol. 340
Vydáno: (2018)
Vydáno: (2018)
Synthesis of high-entropy diboride TiZrNbHfTaB2 by vacuum-free direct current arc plasma method; International Journal of Refractory Metals and Hard Materials; Vol. 134
Vydáno: (2026)
Vydáno: (2026)
Pore Formation during Laser Welding in Different Spatial Positions; Solid State Phenomena; Vol. 303
Vydáno: (2020)
Vydáno: (2020)
Физические основы неразрушающего контроля изоляции обмоток электроприводов горношахтного и нефтепромыслового оборудования; Известия Томского политехнического университета [Известия ТПУ]. Инжиниринг георесурсов; Т. 327, № 2
Autor: Смирнов Г. В. Геннадий Васильевич
Vydáno: (2016)
Autor: Смирнов Г. В. Геннадий Васильевич
Vydáno: (2016)
Digital X-Ray Apparatus Based on the Scanning R-Ray Gas-Discharge Detector for Studying of Interior Structure of Biological Objects; Advanced Materials Research : Advanced materials, synthesis, development and application; Vol. 880 : Prospects of Fundamental Sciences Development (PFSD-2013)
Vydáno: (2014)
Vydáno: (2014)
Obtaining a Material Based on Я-SiC and Carbon Fibers Using an Electric Arc Technique; Inorganic Materials: Applied Research; Vol. 10, iss. 4
Vydáno: (2019)
Vydáno: (2019)
Synthesis of transition metal carbides and high-entropy carbide TiZrNbHfTaC5 in self-shielding DC arc discharge plasma; Ceramics International; Vol. 48, iss. 2
Vydáno: (2022)
Vydáno: (2022)
Synthesis of molybdenum carbide catalyst by DC arc plasma in ambient air for hydrogen evolution; Materials Chemistry and Physics; Vol. 254
Vydáno: (2020)
Vydáno: (2020)
Inspection methods of load-recording device “Gamma-500”; Control and Communications (SIBCON)
Vydáno: (2015)
Vydáno: (2015)
Podobné jednotky
-
Stability of MMA welding with protective coatings; Structural Integrity and Life; Vol. 20, № 1
Vydáno: (2020) -
Synthesis of Crystalline Tungsten Carbide Phases under the Influence of Atmospheric Electrical Arc Plasma on Tungsten Oxide; Journal of Superhard Materials; Vol. 43, iss. 3
Vydáno: (2021) -
The Effect of Energy Parameters of Power Sources on the Structure and Properties of Permanent Joints at Manual Arc Welding; Metals; Vol. 14, iss. 7
Autor: Ilyashchenko D. P. Dmitry Pavlovich
Vydáno: (2024) -
Influence of Nanostructured Powder Modifiers on the Structure of a Welding Bead; Advanced Materials Research; Vol. 872
Vydáno: (2014) -
Comparison of glow, arc, and magnetron direct current discharges; Resource-Efficient Technologies; No 2
Autor: Abrahamyan A. S.
Vydáno: (2019)