Superior MoTiN and NiMoTiN coating electrode with platinum-like catalytic activity fabricated by plasma electrolytic oxidation; International Journal of Hydrogen Energy; Vol. 68
| Parent link: | International Journal of Hydrogen Energy.— .— Amsterdam: Elsevier Science Publishing Company Inc. Vol. 68.— 2024.— P. 798-806 |
|---|---|
| Korporativní autor: | National Research Tomsk Polytechnic University |
| Další autoři: | Fan Wei, Jing Li, Wenxian Lu, An V. V. Vladimir Vilorievich, Jingzhi Tang, Ling Zhao, Zhe Hua, Liu Yang, Jinlei Yao, Baodan Liu |
| Shrnutí: | Title screen Electrolyzing water is an effective and feasible technology to achieve a large-scale hydrogen production in industry. However, it is still challenging to develop an efficient approach to fabricate a superior and stable hydrogen evolution reaction (HER) electrodes with low cost and outstanding catalytic efficiency. This work presents an innovative surface modification technique of plasma electrolytic oxidation (PEO) to fabricate superior MoN based coating electrodes. By simply introducing Na2MoO4 and NiAc2 into the electrolyte, a novel MoTiN and NiMoTiN coatings were successfully achieved on the surface of a titanium substrate by PEO and annealing treatments, which exhibits excellent mechanical adhesion and platinum-like catalytic properties. Importantly, it has been demonstrated that the newly formed MoTiN solid solution combined by active Mo2N and conductive TiN can contribute the superior catalytic activity and the subsequent Ni doping can effectively stabilize the structure and activity of MoTiN. Under the alkaline environment of 1 M KOH, the MoTiN and NiMoTiN coated electrodes require only 126 and 121 mV overpotential, respectively, to achieve a current density of 10 mA cm−2. Additionally, under the same test conditions, NiMoTiN can operate stably for over 24 h, demonstrating excellent HER catalytic activity and stability. This work provides new insights into the preparation of HER electrodes with superior mechanical properties and excellent catalytic performance towards industrial hydrogen production Текстовый файл |
| Jazyk: | angličtina |
| Vydáno: |
2024
|
| Témata: | |
| On-line přístup: | https://doi.org/10.1016/j.ijhydene.2024.04.304 |
| Médium: | Elektronický zdroj Kapitola |
| KOHA link: | https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=672584 |
Podobné jednotky
Superhard nanocrystalline Ti-Cu-N coatings deposited by vacuum arc evaporation of a sintered cathode; Surface and Coatings Technology; Vol. 207
Vydáno: (2012)
Vydáno: (2012)
Прямой синтез нанодисперсного TiN в импульсной струе электроэрозионной плазмы; Современные техника и технологии; Т. 2
Autor: Сайгаш А. С. Анастасия Сергеевна
Vydáno: (2008)
Autor: Сайгаш А. С. Анастасия Сергеевна
Vydáno: (2008)
Применение метода акустической эмиссии для исследованиия повреждаемости покрытия TiN; Дефектоскопия; № 7
Vydáno: (2002)
Vydáno: (2002)
Thermal Stability of TiZrAlN and TiZrSiN Films Formed by Reactive Magnetron Sputtering; Inorganic Materials: Applied Research; Vol. 9, iss. 3
Vydáno: (2018)
Vydáno: (2018)
Применения методики анализа спектральных образов сигналов акустической эмиссии для исследования повреждаемости покрытий TiN на стальной подложке; Дефектоскопия; № 7
Autor: Мерсон Д. Л.
Vydáno: (2002)
Autor: Мерсон Д. Л.
Vydáno: (2002)
Effect of N2 to total pressure ratio on the structure, mechanical and tribological properties of magnetron-sputtered Ti-Al-Ta-Si-N coatings; Surface and Coatings Technology; Vol. 492
Vydáno: (2024)
Vydáno: (2024)
In Situ Synchrotron Study of the Phase Transformations in Ti-5.7Al-1.6V-3Mo Titanium Alloy at High Temperature; Journal of Materials Engineering and Performance; Vol. 33, iss. 19
Autor: Perevalova O. B. Olga Borisovna
Vydáno: (2024)
Autor: Perevalova O. B. Olga Borisovna
Vydáno: (2024)
Energy Flux at the Substrate During Dual Magnetron Sputtering of TiAlN Coating; Russian Physics Journal; № 11 - Vol. 65
Vydáno: (2023)
Vydáno: (2023)
Improvement of Mechanical Properties and Adhesion of Ti-Al-Si-N Coatings by Alloying with Ta; Lubricants; Vol. 10 iss. 8
Vydáno: (2022)
Vydáno: (2022)
Взаимодействие метана с серой в присуствии нанесенного на [γ-AL2O3] молибден-никель-сульфидного катализатора; Нефтехимия; Т. 42, № 2
Vydáno: (2002)
Vydáno: (2002)
The Effect of Heat Treatment on the Microstructure and Phase Composition of Wrought and 3D-Printed Ti–5Al–3Mo–1V Titanium Alloy Samples; Journal of Surface Investigation: X-ray, Synchrotron and Neutron Techniques; Vol. 17, Suppl. 1
Vydáno: (2023)
Vydáno: (2023)
Модификация структуры покрытий TiALN путем предварительной бомбардировки стальной подложки ионами Ti; Журнал технической физики; Т. 86, вып. 3
Vydáno: (2016)
Vydáno: (2016)
Biocompatibility of Porous SHS-TiNi; Materials Science Forum; Vol. 970 : Modern Problems in Materials Processing, Manufacturing, Testing and Quality Assurance II
Vydáno: (2019)
Vydáno: (2019)
Modeling of microstructure and elastic properties of nc-TiN/a-Si3N4 nanocomposite; Computational Materials Science; Vol. 123
Vydáno: (2016)
Vydáno: (2016)
Tuning of mechanical properties of Ti1?xAlxN coatings through Ta alloying; Surface and Coatings Technology; Vol. 382
Vydáno: (2020)
Vydáno: (2020)
Laser-synthesized TiN nanoparticles for biomedical applications: Evaluation of safety, biodistribution and pharmacokinetics; Materials Science and Engineering: C; Vol. 120
Vydáno: (2021)
Vydáno: (2021)
Assessment of Microstructural, Mechanical and Electrochemical Properties of Ti–42Nb Alloy Manufactured by Electron Beam Melting; Materials; Vol. 16, iss. 13
Vydáno: (2023)
Vydáno: (2023)
Математическое моделирование синтеза покрытия системы TI-NI на стальной подложке цилиндрической формы; Перспективы развития фундаментальных наук
Autor: Сорокова С. Н. Светлана Николаевна
Vydáno: (2008)
Autor: Сорокова С. Н. Светлана Николаевна
Vydáno: (2008)
All-inkjet-printed MoS2 field-effect transistors on paper for low-cost and flexible electronics; Applied Nanoscience; Vol. 10, iss. 9
Vydáno: (2020)
Vydáno: (2020)
Кристаллогеометрия структур в системах Ti-Ni, Ti-Nb и Ti-Ni-Nb; Фундаментальные проблемы современного материаловедения; Т. 7, № 3
Vydáno: (2010)
Vydáno: (2010)
Direct dynamic synthesis of nanodispersed titanium nitride in a high-speed pulse electroerosion plasma jet; Journal of Superhard Materials; Vol. 30, № 5
Autor: Sivkov A. A. Aleksandr Anatolyevich
Vydáno: (2008)
Autor: Sivkov A. A. Aleksandr Anatolyevich
Vydáno: (2008)
Structural Defects in TiNi-Based Alloys after Warm ECAP; Metals; Vol. 10, iss. 9
Vydáno: (2020)
Vydáno: (2020)
Laser-Induced photothermal activation of multilayer MoS2 with spatially controlled catalytic activity; Journal of Colloid and Interface Science; Vol. 654, Pt. A
Vydáno: (2024)
Vydáno: (2024)
Characterization of the Hydrogen Migration in a VT1-0 Titanium Alloy by Thermo-EMF and Eddy Current Nondestructive Control Methods; Russian Metallurgy (Metally); Vol. 2020, iss. 11
Vydáno: (2020)
Vydáno: (2020)
Effect of Surface Alloying by Silicon on the Corrosion Resistance and Biocompatibility of the Binary NiTi; Journal of Materials Engineering and Performance; Vol. 23, iss. 7
Vydáno: (2014)
Vydáno: (2014)
Structure-phase status of the high-entropy AlNiNbTiCo alloy; Russian Physics Journal; Vol. 67, No. 2
Vydáno: (2024)
Vydáno: (2024)
Influence of Strain Localization on Deformation Mechanisms and Fracture of 12Cr1MoV Steel with Various Notch Shape under Impact Loading; AIP Conference Proceedings; Vol. 1783 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016
Vydáno: (2016)
Vydáno: (2016)
Hydrogen diffusion and the effect of hydrogen on structural transformations in binary TiNi based alloys; International Journal of Hydrogen Energy; Vol. 44, iss. 55
Vydáno: (2019)
Vydáno: (2019)
Effect of short-pulsed ion irradiation on the optical and electrical properties of titanium nitride films deposited by reactive magnetron sputtering; Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms; Vol. 526
Vydáno: (2022)
Vydáno: (2022)
ÐÐʻÑДÐʻ Ð″ ÑпÐʺÑÑ: ÑÐʺЂÑеÐ♯еÐʹÐʹÑе ÑеÐʹдеÐʹÑÐ″Ð″ Đ 4 (ÑÐʺÐ♯ 8), 2020 гÐʺд -
Vydáno: (ÐÐʺÑДЂÐʻ, ÐʺЂÐʺлЇÑДÐʻÑ Ð³ÐʺÑÑдÐʻÑÑÑЂеÐʹÐʹÐʻÑ ÐʻДÐʻдеÐ♯Ð″Ñ ÑÐ″зÐ″ÑеÑДÐʺÐ’ ДÑл, 2021)
Vydáno: (ÐÐʺÑДЂÐʻ, ÐʺЂÐʺлЇÑДÐʻÑ Ð³ÐʺÑÑдÐʻÑÑÑЂеÐʹÐʹÐʻÑ ÐʻДÐʻдеÐ♯Ð″Ñ ÑÐ″зÐ″ÑеÑДÐʺÐ’ ДÑл, 2021)
ÐÐʻÑДÐʻ Ð″ ÑпÐʺÑÑ: ÑÐʺЂÑеÐ♯еÐʹÐʹÑе ÑеÐʹдеÐʹÑÐ″Ð″ Đ 1 (ÑÐʺÐ♯ 8), 2020 гÐʺд -
Vydáno: (ÐÐʺÑДЂÐʻ, ÐʺЂÐʺлЇÑДÐʻÑ Ð³ÐʺÑÑдÐʻÑÑÑЂеÐʹÐʹÐʻÑ ÐʻДÐʻдеÐ♯Ð″Ñ ÑÐ″зÐ″ÑеÑДÐʺÐ’ ДÑл, 2021)
Vydáno: (ÐÐʺÑДЂÐʻ, ÐʺЂÐʺлЇÑДÐʻÑ Ð³ÐʺÑÑдÐʻÑÑÑЂеÐʹÐʹÐʻÑ ÐʻДÐʻдеÐ♯Ð″Ñ ÑÐ″зÐ″ÑеÑДÐʺÐ’ ДÑл, 2021)
Effect of nitrogen-doping and post annealing on wettability and band gap energy of TiO2 thin film; Applied Surface Science; Vol. 500
Vydáno: (2020)
Vydáno: (2020)
ÐÐʻÑДÐʻ Ð″ ÑпÐʺÑÑ: ÑÐʺЂÑеÐ♯еÐʹÐʹÑе ÑеÐʹдеÐʹÑÐ″Ð″ Đ 2 (ÑÐʺÐ♯ 8), 2020 гÐʺд -
Vydáno: (ÐÐʺÑДЂÐʻ, ÐʺЂÐʺлЇÑДÐʻÑ Ð³ÐʺÑÑдÐʻÑÑÑЂеÐʹÐʹÐʻÑ ÐʻДÐʻдеÐ♯Ð″Ñ ÑÐ″зÐ″ÑеÑДÐʺÐ’ ДÑл, 2021)
Vydáno: (ÐÐʺÑДЂÐʻ, ÐʺЂÐʺлЇÑДÐʻÑ Ð³ÐʺÑÑдÐʻÑÑÑЂеÐʹÐʹÐʻÑ ÐʻДÐʻдеÐ♯Ð″Ñ ÑÐ″зÐ″ÑеÑДÐʺÐ’ ДÑл, 2021)
ÐÐʻÑДÐʻ Ð″ ÑпÐʺÑÑ: ÑÐʺЂÑеÐ♯еÐʹÐʹÑе ÑеÐʹдеÐʹÑÐ″Ð″ Đ 3 (ÑÐʺÐ♯ 8), 2020 гÐʺд -
Vydáno: (ÐÐʺÑДЂÐʻ, ÐʺЂÐʺлЇÑДÐʻÑ Ð³ÐʺÑÑдÐʻÑÑÑЂеÐʹÐʹÐʻÑ ÐʻДÐʻдеÐ♯Ð″Ñ ÑÐ″зÐ″ÑеÑДÐʺÐ’ ДÑл, 2021)
Vydáno: (ÐÐʺÑДЂÐʻ, ÐʺЂÐʺлЇÑДÐʻÑ Ð³ÐʺÑÑдÐʻÑÑÑЂеÐʹÐʹÐʻÑ ÐʻДÐʻдеÐ♯Ð″Ñ ÑÐ″зÐ″ÑеÑДÐʺÐ’ ДÑл, 2021)
Hydrogen-induced failure of TiNi based alloy with coarse-grained and ultrafine-grained structure; Procedia Structural Integrity; Vol. 2: 21st European Conference on Fracture: ECF21, 20-24 June 2016, Catania, Italy
Vydáno: (2016)
Vydáno: (2016)
MoS2@ZnO Nanoheterostructures Prepared by Electrospark Erosion for Photocatalytic Applications; Nanomaterials; Vol. 11, iss. 1
Vydáno: (2021)
Vydáno: (2021)
Preparation and Electron-Beam Surface Modification of Novel TiNi Material for Medical Applications; Applied Sciences; Vol. 11, iss. 10
Vydáno: (2021)
Vydáno: (2021)
Atomic layer deposition-developed two-dimensional alpha-MoO3 windows excellent hydrogen peroxide electrochemical sensing capabilities; Sensors and Actuators B: Chemical; Vol. 262
Vydáno: (2018)
Vydáno: (2018)
Microstructure and Phase Composition of VT1-0, VT6, and VT14 Titanium Alloys Produced by Wire-Feed Electron-Beam Additive Manufacturing; Journal of Surface Investigation. X-ray, Synchrotron and Neutron Techniques; Vol. 16, iss. 6
Vydáno: (2022)
Vydáno: (2022)
The effect of MoO3 interlayer on electro-physical characteristics of the perovskite solar cells; Synthetic Metals; Vol. 281
Vydáno: (2021)
Vydáno: (2021)
Podobné jednotky
-
Superhard nanocrystalline Ti-Cu-N coatings deposited by vacuum arc evaporation of a sintered cathode; Surface and Coatings Technology; Vol. 207
Vydáno: (2012) -
Прямой синтез нанодисперсного TiN в импульсной струе электроэрозионной плазмы; Современные техника и технологии; Т. 2
Autor: Сайгаш А. С. Анастасия Сергеевна
Vydáno: (2008) -
Применение метода акустической эмиссии для исследованиия повреждаемости покрытия TiN; Дефектоскопия; № 7
Vydáno: (2002) -
Thermal Stability of TiZrAlN and TiZrSiN Films Formed by Reactive Magnetron Sputtering; Inorganic Materials: Applied Research; Vol. 9, iss. 3
Vydáno: (2018) -
Применения методики анализа спектральных образов сигналов акустической эмиссии для исследования повреждаемости покрытий TiN на стальной подложке; Дефектоскопия; № 7
Autor: Мерсон Д. Л.
Vydáno: (2002)