Study of Thermal Behavior of Epoxy Composites Filled with Different Natural Zeolites; Materials Science Forum; Vol. 1065

Study of Thermal Behavior of Epoxy Composites Filled with Different Natural Zeolites; Materials Science Forum; Vol. 1065

Détails bibliographiques
Parent link:	Materials Science Forum Vol. 1065.— 2022.— [P. 23-33]
Collectivité auteur:	Национальный исследовательский Томский политехнический университет Инженерная школа неразрушающего контроля и безопасности Отделение контроля и диагностики
Autres auteurs:	Amelkovich Yu. A. Yuliya Alexandrovna, Nazarenko O. B. Olga Bronislavovna, Putkhenpurakalchira M. V. Maniyan Visakkh, Zadorozhnaya T. A. Tatiyana Anatolyevna
Résumé:	Title screen One of the ways to enhance thermal stability and reduce the flammability of polymers is the introduction of fillers with flame retardant properties. The paper studies the effect of natural zeolites of the Sakhaptinsk and Shivyrtuysk deposits on the thermal stability and flame retardancy of epoxy composites. The thermal stability of epoxy composites was characterized by thermogravimetric analysis in oxidizing (air) and inert (argon) atmospheres. The parameters of thermo-oxidative degradation and thermal degradation of the samples with a filler concentration of 0, 1, 5, and 10 wt% were studied. Flame retardancy of epoxy composites filled with zeolite was evaluated using the limiting oxygen index. The limiting oxygen index increases with increasing concentration of natural zeolites in the epoxy matrix. The study revealed some differences in the first and second stages of heating the epoxy composites depending on zeolite type and did not reveal significant difference in the thermal behavior of the epoxy composites in the third stage of the heating. Thermal stability and flame retardant properties are more dependent on the zeolite content in the epoxy matrix than zeolite type. Режим доступа: по договору с организацией-держателем ресурса
Langue:	anglais
Publié:	2022
Sujets:	электронный ресурс труды учёных ТПУ
Accès en ligne:	https://doi.org/10.4028/p-jhe993
Format:	Électronique Chapitre de livre
KOHA link:	https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=669584

Documents similaires

Combined effect of zeolite and boric acid on thermal behavior of epoxy composites; Journal of Thermal Analysis and Calorimetry; Vol. 128, iss. 1
par: Nazarenko O. B. Olga Bronislavovna
Publié: (2017)

Influence of modified natural zeolite on the thermal stability of epoxy based composites; IOP Conference Series: Materials Science and Engineering; Vol. 1019 : 14th International Forum on Strategic Technology (IFOST 2019)
par: Murashkina Y. S.
Publié: (2021)

Epoxy Composites Filled with Sodium Bicarbonate: Thermal and Mechanical Properties; Key Engineering Materials; Vol. 781 : Radiation-Thermal Effects and Processes in Inorganic Materials
par: Murashkina Yu. Yuliya
Publié: (2018)

Thermal properties of epoxy composites filled with boric acid; IOP Conference Series: Materials Science and Engineering; Vol. 81 : Radiation-Thermal Effects and Processes in Inorganic Materials
Publié: (2015)

Effect of Shivirtui zeolite on thermal and thermooxidative destruction of epoxy composites; Энерго-ресурсоэффективность в интересах устойчивого развития
par: Murashkina Y. S.
Publié: (2018)

Modeling of the stress–strain behavior of an epoxy-based nanocomposite filled with silica nanoparticles; Materials and Design; Vol. 89
Publié: (2015)

Effect of zeolite modification on mechanical properties of epoxy composites; 11th International Forum on Strategic Technology (IFOST 2016); Pt. 1
Publié: (2016)

Synthesis of Tree-Component Cobalt-Based Alloy by Selective Laser Melting; Materials Science Forum; Vol. 1065
Publié: (2022)

Effect of boric acid on thermal behavior of copper nanopowder/epoxy composites; Journal of Thermal Analysis and Calorimetry; Vol. 131, iss. 1
Publié: (2018)

Thermal Stability and Flammability of Epoxy Composites Filled with Multi-Walled Carbon Nanotubes, Boric Acid, and Sodium Bicarbonate; Polymers; Vol. 13, iss. 4
Publié: (2021)

Thermal Behavior and Flammability of Epoxy Composites Based on Multi-Walled Carbon Nanotubes and Expanded Graphite: A Comparative Study; Applied Sciences; Vol. 10, iss. 19
Publié: (2020)

Effect of zeolite and boric acid on epoxy-based composites; Polymers for Advanced Technologies; Vol. 27, iss. 8
Publié: (2016)

Dynamics of destruction of epoxy composites filled with ultra-dispersed diamond under impact conditions; Mechanics of Advanced Materials and Structures; Vol. 27, No. 9
Publié: (2020)

Modeling and Experimental Study of Hysteresis during the Reactive Sputter Deposition of Titanium Oxides and Nitrides Using a Pulsed DC Magnetron; Materials Science Forum; Vol. 1065
Publié: (2022)

Thermooxidative Degradation of Composites Based on Epoxy Resin and Metal Nanopowders; Materials Science Forum; Vol. 942 : Modern Problems in Materials Processing, Manufacturing, Testing and Quality Assurance
par: Lipchansky D. S. Dmitry Sergeevich
Publié: (2019)

Mechanical and thermal properties of Moringa oleifera cellulose-based epoxy nanocomposites; Journal of Composite Materials; Vol. 53, iss. 5
Publié: (2019)

Mesoscale modeling of the mechanical and tribological behavior of a polymer matrix composite based on epoxy and 6 vol.% silica nanoparticles; Computational Materials Science; Vol. 110
Publié: (2015)

Enhancement of mechanical and electrical properties of epoxy-based composites filled with intact or oxidized carbon nanotubes; Composites: Mechanics, Computations, Applications: An International Journal; Vol. 10, iss. 3
Publié: (2019)

Effect of iron nanopowder on flammability of epoxy composites; IOP Conference Series: Materials Science and Engineering; Vol. 1019 : 14th International Forum on Strategic Technology (IFOST 2019)
par: Nazarenko O. B. Olga Bronislavovna
Publié: (2021)

Improvement of the Thermal Behaviour of Epoxy/Fe Nanoparticle Composites by the Addition of Flame Retardants; Journal of Inorganic and Organometallic Polymers and Materials; Vol. 35, iss. 12
Publié: (2025)

Thermal characteristics of polymer composites based on epoxy resin and copper nanopowders; International Conference on Thermal Analysis and Calorimetry in Russia (RTAC-2016); Vol. 1
Publié: (2016)

Effect of electron beam irradiation on thermal and mechanical properties of aluminum based epoxy composites; Radiation Physics and Chemistry; Vol. 136
Publié: (2017)

Materials Science Forum
Publié: (Bäch, Trans Tech Publications Ltd., 1984-)

Comparative study of the effect of flame retardants on the ignition temperature of epoxy composites; Eurasian Physical Technical Journal; Vol. 18, No. 2
Publié: (2021)

A comparative study on thermal conductivity and permittivity of composites based on linear low-density polyethylene and poly(lactic acid) filled with hexagonal boron nitride; Polymer Composites; Vol. 43, iss. 1
par: Lebedev S. M. Sergey Mikhailovich
Publié: (2022)

Natural fi bre composites: Materials, processes and properties
Publié: (Oxford, Woodhead Publishing Limited, 2014)

Thermal nondestructive testing of carbon epoxy composites: detailed analysis and data processing; NDT and E International; Vol. 26, iss. 2, April
Publié: (1993)

Effect of electron beam irradiation on thermal and mechanical properties of epoxy polymer; IOP Conference Series: Materials Science and Engineering; Vol. 168 : Radiation-Thermal Effects and Processes in Inorganic Materials (RTEP2016)
Publié: (2017)

Characterization of Shivirtui Zeolite Modified with Aluminum Oxyhydroxide Nanofibers; Materials Science Forum; Vol. 942 : Modern Problems in Materials Processing, Manufacturing, Testing and Quality Assurance
par: Murashkina Yu. S. Yuliya Sergeevna
Publié: (2019)

Проект железобетонного рамного путепровода пролетом в свету 10,65 mt
par: Барри В. А.
Publié: (Харбин, Издание Русско-Китайского Политехнического Института, 1927)

Evaluation of equivalent defect heat generation in carbon epoxy composite under powerful ultrasonic stimulation by using infrared thermography; IOP Conference Series: Materials Science and Engineering; Vol. 81 : Radiation-Thermal Effects and Processes in Inorganic Materials
par: Derusova D. A. Dariya Aleksandrovna
Publié: (2015)

Formation of catalytically active copper and nickel nanoparticles in natural zeolites; Studies in Surface Science and Catalysis; Vol. 174, part A
Publié: (2008)

Acoustic Tomography of Composite Materials of the Through-Transition Method; Materials Science Forum; Vol. 938 : Materials and Technologies in Mechanical Engineering
Publié: (2018)

Physical and Chemical Aspects of Formation of Epoxy Composite Material with Microfilling Agent; Key Engineering Materials; Vol. 712 : Advanced Materials for Technical and Medical Purpose (AMTMP 2016)
Publié: (2016)

Evaluating impact damage in graphite epoxy composite by using low-power vibrothermography; Proceedings of SPIE; Vol. 9861 : Thermosense: Thermal Infrared Applications XXXVIII
par: Derusova D. A. Dariya Aleksandrovna
Publié: (2016)

Effect of thermal radiation on natural convection in a square porous cavity filled with a fluid of temperature-dependent viscosity; Thermal Science; Vol. OnLine-First, iss. 00
par: Astanina M. S. Marina
Publié: (2016)

Collisions between droplets of liquids of different viscosity and composite fuel particles; Experimental Thermal and Fluid Science; Vol. 173
Publié: (2026)

Thermooxidative degradation of metal nanopowders/epoxy composites; Энерго-ресурсоэффективность в интересах устойчивого развития
par: Lypchansky D. S.
Publié: (2018)

Two Different States of Copper Ions in Zeolites; Advanced Materials Research : Advanced materials, synthesis, development and application; Vol. 880 : Prospects of Fundamental Sciences Development (PFSD-2013)
Publié: (2014)

Electron beam depth dose distributions in 3D-printed samples with different material filling factor; Radiotherapy and Oncology; Vol. 152
Publié: (2020)