Effect of the MgO Addition on the Structure and Physical Properties of the High Entropy HfZrCeYO Fluorite Ceramics; Coatings; Vol. 13, iss. 5
| Parent link: | Coatings Vol. 13, iss. 5.— 2023.— [917, 8 p.] |
|---|---|
| Corporate Author: | Национальный исследовательский Томский политехнический университет Исследовательская школа физики высокоэнергетических процессов |
| Other Authors: | Zenkin S. P. Sergey Petrovich, Gaydaychuk A. V. Alexander Valerievich, Mitulinsky A. S. Aleksandr Sergeevich, Bulakh V. A. Vlada Aleksandrovna, Linnik S. A. Stepan Andreevich |
| Summary: | Title screen One of the most promising applications of high entropy ceramics is their use as high temperature protective materials. Due to the additional entropic stabilization of the crystal structure, four- and five-element high entropy ceramics exhibit enhanced thermal and mechanical properties. For these applications, one of the most promising high entropy protective oxides are ZrO2- and HfO2-based protective HEOs. In this article, we study the HfO2–ZrO2–Y2O3–CeO2 equimolar system with the addition of MgO as a fifth component. We found that the HfZrCeY(Mg)O system maintains a single FCC crystalline structure up to the MgO concentration = 31.9 mol.%. Additionally, we determined that an addition of MgO at the close-to-equimolar HfZrCeY(Mg)O composition enhances the thermal properties of HEO, but reduces the mechanical properties such as hardness and resistance to crack formation. The minimum weight loss at the heating from RT up to 1450 °C was measured for the close-to-equimolar HfZrCeY(Mg)O composition at 18.4 mol.% MgO. The hardness of such composition was around 18 GPa. Due to the combination of these properties, the synthesized coating can be used as a protective material for high temperature applications, such as the protection of turbine parts. |
| Language: | English |
| Published: |
2023
|
| Subjects: | |
| Online Access: | http://earchive.tpu.ru/handle/11683/132552 https://doi.org/10.3390/coatings13050917 |
| Format: | Electronic Book Chapter |
| KOHA link: | https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=669576 |
Similar Items
Influence of the elemental composition on the structural and mechanical characteristics of entropy-stabilized HfZrCeYMgAlO thin films prepared by reactive magnetron sputtering; Ceramics International; Vol. 50, iss. 18, Pt. A
Published: (2024)
Published: (2024)
Effect of nitrogen content on structural and mechanical properties of AlTiZrTaHf(-N) high entropy films deposited by reactive magnetron sputtering; Surface and Coatings Technology; Vol. 432
Published: (2022)
Published: (2022)
Tailoring of optical, mechanical and surface properties of high-entropy Hf-Zr-Ce-Y-O ceramic thin films prepared by HiPIMS sputtering; Surface and Coatings Technology; Vol. 433
Published: (2022)
Published: (2022)
A Strategy for Alleviating Micro Arcing during HiPIMS Deposition of DLC Coatings; Materials; Vol. 13, iss. 5
Published: (2020)
Published: (2020)
Flexible hard Al-Si-N films for high temperature operation; Surface and Coatings Technology; Vol. 307, pt. B: Electrochemical and Plasma Electrolytic Modification of Metal Surfaces
Published: (2016)
Published: (2016)
Magnetron deposition of chromium nitride coatings using a hot chromium target: Influence of magnetron power on the deposition rate and elemental composition; Surface and Coatings Technology; Vol. 433
Published: (2022)
Published: (2022)
Oxidation Performance of Nano-Layered (AlTiZrHfTa)Nx/SiNx Coatings Deposited by Reactive Magnetron Sputtering; Materials; Vol. 17, iss. 12
Published: (2024)
Published: (2024)
Wettability of Thin Silicate-Containing Hydroxyapatite Films Formed by RF-Magnetron Sputtering; Russian Physics Journal; Vol. 56, iss. 10
Published: (2014)
Published: (2014)
Physical-Mechanical Characteristics of RF Magnetron Sputter-Deposited Coatings Based on Silver-Doped Hydroxyapatite; Russian Physics Journal; Vol. 56, iss. 10
Published: (2014)
Published: (2014)
Erratum to: Wettability of Thin Silicate-Containing Hydroxyapatite Films formed by RF-Magnetron Sputtering; Russian Physics Journal; Vol. 56, iss. 11
Published: (2014)
Published: (2014)
Synthesis of TiZrNbHfTaC5 High-Entropy Carbide Powder: Sintering and Radiation Resistance Research; Russian Physics Journal; Vol. 67, No. 5
Published: (2024)
Published: (2024)
Impact of Hyperspeed Iron Microparticles on Light Transmission of Quartz Glasses with Protective In-Sn-O Coating in the Ultraviolet Range; Russian Physics Journal; Vol. 67, iss. 6
Published: (2024)
Published: (2024)
The effect of Si content on microstructure and mechanical properties of Ti–Al–Ta–Si–N coatings; Vacuum; Vol. 216
Published: (2023)
Published: (2023)
Production of HfTaTiNbZrC5 High-Entropy Carbide Micropowder in the Plasma of an Atmospheric Pressure Arc Discharge; Journal of Engineering Physics and Thermophysics; Vol. 94, iss. 1
Published: (2021)
Published: (2021)
The role of thermal processes and target evaporation in formation of self-sputtering mode for copper magnetron sputtering; Vacuum; Vol. 152
Published: (2018)
Published: (2018)
Microstructure and Hydrogen Permeability of Nb-Ni-Ti-Zr-Co High Entropy Alloys; Membranes; Vol. 12, iss. 11
Published: (2022)
Published: (2022)
Modification of optical and photoelectrical properties of thin gallium oxide films by intense pulsed 200 keV C+ ion beams; Optical Materials: X; Vol. 25
Published: (2025)
Published: (2025)
Silver-Containing Thin Films on Transparent Polymer Foils for Antimicrobial Applications; Coatings; Vol. 12, iss. 2
Published: (2022)
Published: (2022)
Influence of short-pulsed Ion irradiation on optical and photoelectrical properties of thin gallium oxide films; Optical Materials: X; Vol. 25
Published: (2025)
Published: (2025)
Effect of Al Addition on the Oxidation Resistance of HfC Thin Films; Coatings; Vol. 12, iss. 1
Published: (2022)
Published: (2022)
Effect of N2 to total pressure ratio on the structure, mechanical and tribological properties of magnetron-sputtered Ti-Al-Ta-Si-N coatings; Surface and Coatings Technology; Vol. 492
Published: (2024)
Published: (2024)
The preparation of calcium phosphate coatings on titanium and nickel-titanium by rf-magnetron-sputtered deposition: Composition, structure and micromechanical properties; Surface and Coatings Technology; Vol. 202, iss. 16
Published: (2008)
Published: (2008)
Deposition temperature effect on sputtered hydroxyapatite coatings prepared on AZ31B alloy substrate; Ceramics International; Vol. 48, iss. 8
Published: (2022)
Published: (2022)
Effects of annealing in vacuum on the microstructure of silicon-containing calcium phosphate films deposited on a ZrNb alloy by radio-frequency magnetron sputtering; Vacuum; Vol. 212
Published: (2023)
Published: (2023)
Study on thermal shock irradiation resistance of CoCrFeMnNi high entropy alloy by high intensity pulsed ion beam; Journal of Nuclear Materials; Vol. 559
Published: (2022)
Published: (2022)
Superconductive Nb3Sn Coatings Synthesized for Charged-Particle Accelerators Using Magnetron Sputtering; Russian Physics Journal; Vol. 65, iss. 11
Published: (2023)
Published: (2023)
Magnetron Sputtering Deposition of Intermetallic Coatings Using Tin and Niobium Plasma; Russian Physics Journal; Vol. 65, iss. 11
Published: (2023)
Published: (2023)
Glancing Angle Deposition of Zn-Doped Calcium Phosphate Coatings by RF Magnetron Sputtering; Coatings; Vol. 9, iss. 4
Published: (2019)
Published: (2019)
Synthesis of high-entropy Ti-Zr-Nb-Hf-Ta carbides and carbonitrides in high-speed arc discharge plasma jet; Journal of Alloys and Compounds; Vol. 1010
Published: (2025)
Published: (2025)
Reactive magnetron deposition of YAG:Ce phosphor coatings in the metallic mode; Optical Materials; Vol. 156
Published: (2024)
Published: (2024)
High-entropy Ti-Zr-Nb-Hf-Ta carbide and carbonitride coatings fabricated by high-speed arc discharge plasma jet; International Journal of Refractory Metals and Hard Materials; Vol. 135
Published: (2026)
Published: (2026)
Thermal stability and oxidation resistance of ZrSiN nanocomposite and ZrN/SiNx multilayered coatings: A comparative study; Surface and Coatings Technology; Vol. 332
Published: (2017)
Published: (2017)
Single SOFC with Supporting Ni-YSZ Anode, Bilayer YSZ/GDC Film Electrolyte, and La2NiO4+delta Cathode; Russian Journal of Electrochemistry; Vol. 54, iss. 6
Published: (2018)
Published: (2018)
Reactive Magnetron Plasma Modification of Electrospun PLLA Scaffolds with Incorporated Chloramphenicol for Controlled Drug Release; Polymers; Vol. 14, iss. 3
Published: (2022)
Published: (2022)
Effect of high and low Nb content in multicomponent Nb–Ni–Ti–Zr–Co alloy on its structure, hardness and hydrogen permeability; Intermetallics; Vol. 166
Published: (2024)
Published: (2024)
Влияние добавок Mg–Al–O на свойства структуры высокоэнтропийного оксида Hf–Zr–Ce–Y–O; Химия и химическая технология в XXI веке; Т. 2
by: Булах В. А. Влада Александровна
Published: (2024)
by: Булах В. А. Влада Александровна
Published: (2024)
SiC- and Ag-SiC-Doped Hydroxyapatite Coatings Grown Using Magnetron Sputtering on Ti Alloy for Biomedical Application; Coatings; Vol. 12, iss. 2
Published: (2022)
Published: (2022)
Polyether Ether Ketone Coated with Ultra-Thin Films of Titanium Oxide and Zirconium Oxide Fabricated by DC Magnetron Sputtering for Biomedical Application; Materials; Vol. 15, iss. 22
Published: (2022)
Published: (2022)
Influence of coating parameters on oxidation behavior of Cr-coated zirconium alloy for accident tolerant fuel claddings; Corrosion Science; Vol. 203
Published: (2022)
Published: (2022)
Biological Effect of the Surface Modification of the Fibrous Poly(L-lactic acid) Scaffolds by Radio Frequency Magnetron Sputtering of Different Calcium-Phosphate Targets; BioNanoScience; Vol. 7, iss. 1
Published: (2017)
Published: (2017)
Similar Items
-
Influence of the elemental composition on the structural and mechanical characteristics of entropy-stabilized HfZrCeYMgAlO thin films prepared by reactive magnetron sputtering; Ceramics International; Vol. 50, iss. 18, Pt. A
Published: (2024) -
Effect of nitrogen content on structural and mechanical properties of AlTiZrTaHf(-N) high entropy films deposited by reactive magnetron sputtering; Surface and Coatings Technology; Vol. 432
Published: (2022) -
Tailoring of optical, mechanical and surface properties of high-entropy Hf-Zr-Ce-Y-O ceramic thin films prepared by HiPIMS sputtering; Surface and Coatings Technology; Vol. 433
Published: (2022) -
A Strategy for Alleviating Micro Arcing during HiPIMS Deposition of DLC Coatings; Materials; Vol. 13, iss. 5
Published: (2020) -
Flexible hard Al-Si-N films for high temperature operation; Surface and Coatings Technology; Vol. 307, pt. B: Electrochemical and Plasma Electrolytic Modification of Metal Surfaces
Published: (2016)