Microstructure, phase composition and hardness of Ti–Au cladding deposited on Ti–6Al–4V substrate by electron beam powder bed fusion method; Vacuum; Vol. 203
| Parent link: | Vacuum Vol. 203.— 2022.— [111289, 9 p.] |
|---|---|
| निगमित लेखक: | |
| अन्य लेखक: | , , , , , , , |
| सारांश: | Title screen In this study, a Ti–Au cladding was deposited on a substrate from the Ti–6Al–4V alloy by the electron beam powder bed fusion method in a vacuum. The main goal was to assess the possibility of using titanium powders and gold foils as a feedstock for additive manufacturing of such dental products. The microstructure, chemical element distributions, phase composition and hardness of the formed Ti–Au alloy were studied using optical microscopy, energy dispersive X-ray analysis, as well as X-ray diffraction and nanoindentation tests. Gold-containing intermetallic compounds were observed through the entire cladding thickness. The ?-Ti, ?-Au, AuTi and AuTi3 phases were found, in addition to the Ti3Au one, which provided hardness values greater than those of conventional titanium alloys. It was shown by results of the crystal-geometric and X-ray phase analysis that the AuTi3 phase possessed the most densely packed A15 structure. This fact correlated with the obtained data on the deviation of the atomic volume per ion from Zen's law and the high hardness levels. Metallurgical patterns of the microstructure formation that affected the functional properties of such claddings were discussed and a further research direction was proposed. Режим доступа: по договору с организацией-держателем ресурса |
| भाषा: | अंग्रेज़ी |
| प्रकाशित: |
2022
|
| विषय: | |
| ऑनलाइन पहुंच: | https://doi.org/10.1016/j.vacuum.2022.111289 |
| स्वरूप: | इलेक्ट्रोनिक पुस्तक अध्याय |
| KOHA link: | https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=669322 |
समान संसाधन
Triply Periodic Minimal Surfaces Manufactured by Electron Beam Powder Bed Fusion: Approaches and Challenges; Key Engineering Materials; Vol. 964
प्रकाशित: (2023)
प्रकाशित: (2023)
Energy input effects on the microstructure and mechanical behavior of Ti–Nb alloy additivelymanufactured by electron beam melting; Materials Science and Engineering: A; Vol. 938
प्रकाशित: (2025)
प्रकाशित: (2025)
Comparison the Preparation Methods of Powder Feedstock for Laser Powder Bed Fusion; Solid State Phenomena; Vol. 328
प्रकाशित: (2022)
प्रकाशित: (2022)
Advances in Laser Additive Manufacturing of Ti-Nb Alloys: From Nanostructured Powders to Bulk Objects; Nanomaterials; Vol. 11, iss. 5
प्रकाशित: (2021)
प्रकाशित: (2021)
From raw elements to 3D samples: An economical route for Co-Cr-Mo alloy fabrication; Journal of Alloys and Compounds; Vol. 978
प्रकाशित: (2024)
प्रकाशित: (2024)
Effect of Post-Build Annealing on the Microstructure and Mechanical Properties of LPBF-Processed AlSn10Pb10 Alloy; Journal of Manufacturing and Materials Processing; Vol. 10, iss. 3
प्रकाशित: (2026)
प्रकाशित: (2026)
Порошковый материал для селективного лазерного сплавления медицинского сплава; Инновационные технологии в машиностроении
द्वारा: Химич М. А.
प्रकाशित: (2022)
द्वारा: Химич М. А.
प्रकाशित: (2022)
Влияние температуры нагрева на состояние порошкового материала для селективного лазерного сплавления, полученного механическим легированием; Инновационные технологии в машиностроении
द्वारा: Химич М. А.
प्रकाशित: (2022)
द्वारा: Химич М. А.
प्रकाशित: (2022)
Влияние продолжительности термической обработки на структуру и фазовый состав образцов сплава Co-Cr-Mo, полученных с помощью аддитивных технологий; Письма о материалах; Т. 12, № 1
प्रकाशित: (2022)
प्रकाशित: (2022)
Effect of Laser Energy Density During LPBF on the Structure and Mechanical Properties of Al–15Sn–5Pb Alloy; Materials; Vol. 18, iss. 23
प्रकाशित: (2025)
प्रकाशित: (2025)
Geometrical features and mechanical properties of the sheet-based gyroid scaffolds with functionally graded porosity manufactured by electron beam melting; Materials Today Communications; Vol. 35
प्रकाशित: (2023)
प्रकाशित: (2023)
Технология селективного лазерного спекания в производстве изделий ракетно-космической техники учебное пособие
द्वारा: Баданина Ю. В.
प्रकाशित: (Москва, МГТУ им. Н.Э. Баумана, 2019)
द्वारा: Баданина Ю. В.
प्रकाशित: (Москва, МГТУ им. Н.Э. Баумана, 2019)
On the Use of Chromium Coating for Inner-Side Fuel Cladding Protection: Thickness Identification Based on Fission Fragments Implantation and Damage Profile; Coatings; Vol. 11, iss. 6
द्वारा: Rofida Khamad Khlifa Khamad
प्रकाशित: (2021)
द्वारा: Rofida Khamad Khlifa Khamad
प्रकाशित: (2021)
Magnetic Fusion Technology
प्रकाशित: (2013)
प्रकाशित: (2013)
Frontiers in Fusion Research II Introduction to Modern Tokamak Physics /
द्वारा: Kikuchi, Mitsuru, और अन्य
प्रकाशित: (2015)
द्वारा: Kikuchi, Mitsuru, और अन्य
प्रकाशित: (2015)
Analysis of Dental Imageries Towards Improved Diagnosis
द्वारा: Datta, Soma, और अन्य
प्रकाशित: (2025)
द्वारा: Datta, Soma, और अन्य
प्रकाशित: (2025)
n-Octanol oxidation on Au/TiO2 catalysts promoted with La and Ce oxides; Molecular Catalysis; Vol. 427
प्रकाशित: (2017)
प्रकाशित: (2017)
Лазерная наплавка металлокерамических покрытий TiB2-Ni с использованием вакуумной металлизации; Перспективы развития фундаментальных наук; Т. 1 : Физика
द्वारा: Баянова Е. О.
प्रकाशित: (2025)
द्वारा: Баянова Е. О.
प्रकाशित: (2025)
Magnetic Confinement Fusion Driven Thermonuclear Energy
द्वारा: Zohuri, Bahman
प्रकाशित: (2017)
द्वारा: Zohuri, Bahman
प्रकाशित: (2017)
Fusion's Promise How Technological Breakthroughs in Nuclear Fusion Can Conquer Climate Change on Earth (And Carry Humans To Mars, Too) /
द्वारा: Moynihan, Matthew, और अन्य
प्रकाशित: (2023)
द्वारा: Moynihan, Matthew, और अन्य
प्रकाशित: (2023)
ITER: The Giant Fusion Reactor Bringing a Sun to Earth /
द्वारा: Claessens, Michel
प्रकाशित: (2020)
द्वारा: Claessens, Michel
प्रकाशित: (2020)
The Current State of Application of Ultra- and Nanostructured Powders in Technologies in Welding Technologies (Review); Materials Science Forum; Vol. 927 : Materials and Processing Technology II
द्वारा: Kuznetsov M. A. Maksim Aleksandrovich
प्रकाशित: (2018)
द्वारा: Kuznetsov M. A. Maksim Aleksandrovich
प्रकाशित: (2018)
Investigation of characteristics of gas and coke residue for the regime of quasi- and non-stationary steam gasification of coal in a fluidized bed: Part 1; Energy; Vol. 251
प्रकाशित: (2022)
प्रकाशित: (2022)
Chromium Carbide Coatings for Inner-Side Fuel Cladding Protection: A Reactor Physics–Based Performance Analysis; Nuclear Science and Engineering; Vol. 198
द्वारा: Khlifa R. H. Rofida
प्रकाशित: (2025)
द्वारा: Khlifa R. H. Rofida
प्रकाशित: (2025)
Steam gasification of coal in a fluidized bed: Part 2; Energy; Vol. 334
द्वारा: Shevyrev S. A. Sergey Aleksandrovich
प्रकाशित: (2025)
द्वारा: Shevyrev S. A. Sergey Aleksandrovich
प्रकाशित: (2025)
Физико-механические свойства керамики на основе карбонитрида циркония, консолидированной методом горячего прессования; Перспективы развития фундаментальных наук; Т. 1 : Физика
द्वारा: Кузьменко Е. Д. Егор Дмитриевич
प्रकाशित: (2025)
द्वारा: Кузьменко Е. Д. Егор Дмитриевич
प्रकाशित: (2025)
Improvement of CoCr Alloy Characteristics by Ti-Based Carbonitride Coatings Used in Orthopedic Applications; Coatings; Vol. 10, iss. 5
प्रकाशित: (2020)
प्रकाशित: (2020)
The effect of phase transformations on the recovery of pulsed electron beam irradiated Ti-6Al-4V titanium alloy during scratching; Journal of Alloys and Compounds; Vol. 795
प्रकाशित: (2019)
प्रकाशित: (2019)
Recent Advances in Protective Coatings for Accident Tolerant Zr-Based Fuel Claddings; Coatings; Vol. 11, iss. 5
प्रकाशित: (2021)
प्रकाशित: (2021)
Nickel-chromium (Ni–Cr) coatings deposited by magnetron sputtering for accident tolerant nuclear fuel claddings; Surface and Coatings Technology; Vol. 369
प्रकाशित: (2019)
प्रकाशित: (2019)
Oxidation behavior and physico-mechanical properties of spark plasma sintered ZrCN-ZrO2 ceramics; Ceramics International; Vol. 51, iss. 28, pt. A
द्वारा: Kuzmenko E. D. Egor Dmitrievich
प्रकाशित: (2025)
द्वारा: Kuzmenko E. D. Egor Dmitrievich
प्रकाशित: (2025)
Role of Testing Conditions in Formation of Tribological Layers at Line Contacts of Antifriction CF-Reinforced PI- and PEI-Based Composites; Molecules; Vol. 27, iss. 19
प्रकाशित: (2022)
प्रकाशित: (2022)
Chromium coatings deposited by cooled and hot target magnetron sputtering for accident tolerant nuclear fuel claddings; Surface and Coatings Technology; Vol. 389
प्रकाशित: (2020)
प्रकाशित: (2020)
A fixed-bed-column study on arsenic removal from water using an in situ-synthesized nanocomposite of magnetite and reduced graphene oxide; Nano-Structures and Nano-Objects; Vol. 41
प्रकाशित: (2025)
प्रकाशित: (2025)
Создание цифровых трехмерных моделей в программе Fusion 360. Часть 1 Методические указания по выполнению практических работ
द्वारा: Боровик Т. Н.
प्रकाशित: (Москва, РТУ МИРЭА, 2021)
द्वारा: Боровик Т. Н.
प्रकाशित: (Москва, РТУ МИРЭА, 2021)
Создание цифровых трехмерных моделей в программе Fusion 360. Часть 2 Методические указания по выполнению практических работ
द्वारा: Боровик Т. Н.
प्रकाशित: (Москва, РТУ МИРЭА, 2022)
द्वारा: Боровик Т. Н.
प्रकाशित: (Москва, РТУ МИРЭА, 2022)
Man-Made Sun Experimental Advanced Superconducting Tokamak (EAST) Fusion Reactor /
प्रकाशित: (2021)
प्रकाशित: (2021)
Effect of the Metal Deposition Order on Structural, Electronic and Catalytic Properties of TiO2-Supported Bimetallic Au-Ag Catalysts in 1-Octanol Selective Oxidation; Catalysts; Vol. 11, iss. 7
प्रकाशित: (2021)
प्रकाशित: (2021)
Experimental studies of fission product release from model fuel elements at the physical start-up of the IVG.1M research reactor; Applied Radiation and Isotopes; Vol. 201
प्रकाशित: (2023)
प्रकाशित: (2023)
Crystal phase formation in colored leucite-reinforced glass-ceramics for dental restorations; Inorganic Materials: Applied Research; Vol. 8, iss. 1
प्रकाशित: (2017)
प्रकाशित: (2017)