$Evaluation of fracture toughness of hybrid CNT/CFRP composites; Mechanics of Advanced Materials and Structures; Vol. XX, No. XX$

Evaluation of fracture toughness of hybrid CNT/CFRP composites; Mechanics of Advanced Materials and Structures; Vol. XX, No. XX

Bibliografiske detaljer
Parent link:	Mechanics of Advanced Materials and Structures Vol. XX, No. XX.— 2022.— [7 p.]
Hovedforfatter:	Burkov M. V. Mikhail Vladimirovich
Institution som forfatter:	Национальный исследовательский Томский политехнический университет Инженерная школа новых производственных технологий Отделение материаловедения
Andre forfattere:	Eremin A. V. Alexandr Vyacheslavovich
Summary:	Title screen The article is focused on the investigation of interlaminar fracture toughness (IFT) of CFRP modified by SWCNT with 0.1–0.5 wt% concentrations. Mode I IFT is negatively affected by the addition of SWCNTs demonstrating the decrease by 16–46% depending on content. Mode II IFT testing showed a positive influence of SWCNTs resulting in the improvement of IFT up to 35%. The results of these mechanical tests and SEM data along with data of previously conducted research are jointly treated and possible reasons for this behavior are proposed and discussed. Режим доступа: по договору с организацией-держателем ресурса
Sprog:	engelsk
Udgivet:	2022
Fag:	электронный ресурс труды учёных ТПУ CFRP nanocomposite epoxy SWCNT interlaminar fracture toughness
Online adgang:	https://doi.org/10.1080/15376494.2022.2064569
Format:	Electronisk Book Chapter
KOHA link:	https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=668636

Lignende værker

Impact toughness of nanocomposite materials filled with fullerene c60particles; Composites: Mechanics, Computations, Applications: An International Journal; Vol. 9, iss. 2
Udgivet: (2018)

Fracture toughness and abrasive wear of (ZrTi)B2–SiC ceramic composites with low-modulus hexagonal boron nitride inclusions; Ceramics International; Vol. 51, iss. 18, Pt. B
Udgivet: (2025)

Effect of the Lattice Curvature of Ti-6Al-4V Titanium Alloy on Their Fatigue Life and Fracture Toughness; Physical Mesomechanics; Vol. 23, iss. 5
Udgivet: (2020)

Transparent Magnesium Aluminate Spinel Ceramics Reinforced by Alumina Nanofibers; Russian Physics Journal; Vol. 67, iss. 9
Udgivet: (2024)

A novel force-temperature model for evaluating internal forces in CFRP by means of infrared thermography; NDT and E International; Vol. 143
Udgivet: (2024)

Influence of high intensity ion beam irradiation on impact toughness of 12Cr1MoV steel; Procedia Structural Integrity; Vol. 2 : 21st European Conference on Fracture: ECF21, 20-24 June 2016, Catania, Italy
Udgivet: (2016)

Mechanical and thermal properties of Moringa oleifera cellulose-based epoxy nanocomposites; Journal of Composite Materials; Vol. 53, iss. 5
Udgivet: (2019)

Enhancement of mechanical and electrical properties of epoxy-based composites filled with intact or oxidized carbon nanotubes; Composites: Mechanics, Computations, Applications: An International Journal; Vol. 10, iss. 3
Udgivet: (2019)

Lamb Wave Ultrasonic Detection of Barely Visible Impact Damages of CFRP; Russian Journal of Nondestructive Testing; Vol. 55, iss. 2
af: Burkov M. V. Mikhail Vladimirovich
Udgivet: (2019)

Temperature Effect on Deformation and Fracture Mechanisms under Impact Loading of 17Mn1Si Steel with Explicit Accounting Structural Heterogeneity; Procedia Engineering; Vol. 187 : TransBaltica 2017: Transportation science and technology
Udgivet: (2017)

The Effect of Thermal Annealing on Mechanical and Optical Properties of MgAl2O4 Ceramics Fabricated by Spark Plasma Sintering; Russian Physics Journal; Vol. 67, No. 4
Udgivet: (2024)

Studying stability of CFRP composites to low-energy impact damage by laser vibrometry; Russian Journal of Nondestructive Testing; Vol. 55, iss. 9
Udgivet: (2019)

Effects of Low-Modulus BN Inclusions on Properties of Y-TZP Ceramic; Inorganic Materials: Applied Research; Vol. 10, iss. 5
af: Buyakov A. S. Ales Sergeevich
Udgivet: (2019)

Tuning of mechanical properties of Ti1?xAlxN coatings through Ta alloying; Surface and Coatings Technology; Vol. 382
Udgivet: (2020)

The Influence of Regimes of Thermomechanical Treatment on the Structural-Phase State, Mechanical Properties, and Fracture Toughness of Low-Alloy Steel API 5L Grade X52; Russian Physics Journal; Vol. 61, iss. 11
af: Derevyagina L. S. Lyudmila Sergeevna
Udgivet: (2019)

Microstructure of intercritical heat affected zone and toughness of microalloyed steel laser welds; Materials Science and Engineering: A; Vol. 770
Udgivet: (2020)

Optimized machine learning models for natural fractures prediction using conventional well logs; Fuel; Vol. 326
Udgivet: (2022)

A comprehensive review of beneficial applications of viscoelastic surfactants in wellbore hydraulic fracturing fluids; Fuel; Vol. 338
Udgivet: (2023)

Fractography, Fracture Toughness and Structural Turbulence Under Low-Temperature Shock Loading of a Nonequilibrium Titanium Alloy Ti-6Al-4V; Mechanics of Solids; Vol. 55, iss. 5
Udgivet: (2020)

Nanoscale Mesoscopic Structural States in Low-Alloy Steels for Martensitic Phase Formation and Low-Temperature Toughness Enhancement; Physical Mesomechanics; Vol. 23, iss. 5
Udgivet: (2020)

Nanoscale Mesoscopic Structural States in Low-Alloy Steels for Martensitic Phase Formation and Low-Temperature Toughness Enhancement; Physical Mesomechanics; Vol. 23, iss. 5
Udgivet: (2021)

Influence of long-term cold climate operation on structure, fatigue durability and impact toughness of 09Mn2Si pipe steel; Engineering Failure Analysis; Vol. 102
Udgivet: (2019)

Influence of long-term operation on structure, fatigue durability and impact toughness of 09Mn2Si pipe steel; Procedia Structural Integrity; Vol. 5 : 2nd International Conference on Structural Integrity, ICSI 2017, 4-7 September 2017, Funchal, Madeira, Portugal
Udgivet: (2017)

Effect of helical rolling on the bainitic microstructure and impact toughness of the low-carbon microalloyed steel; Materials Science and Engineering: A; Vol. 816
Udgivet: (2021)

The role of nanoscale strain-induced defects in the sharp increase of low-temperature toughness in low-carbon and low-alloy steels; Materials Science and Engineering: A; Vol. 768
Udgivet: (2019)

Shale strata development problems and origin of the Bazhenov Formation fractures in the southeast of the West Siberian Plate; Russian Geology and Geophysics; Vol. 59, iss. 1
af: Belozerov V. B. Vladimir Borisovich
Udgivet: (2018)

Dynamic infrared scanning thermography based on CNN: a novel large-scale honeycomb defect detection and classification technique; Journal of Thermal Analysis and Calorimetry; Vol. 150, iss. 11
Udgivet: (2025)

Deformation and fracture of alumina ceramics with hierarchical porosity; Journal of Silicate Based and Composite Materials; Vol. 70, No. 1
Udgivet: (2018)

Comparative study of active infrared thermography, ultrasonic laser vibrometry and laser ultrasonics in application to the inspection of graphite/epoxy composite parts; Quantitative InfraRed Thermography Journal; Vol. XX
Udgivet: (2019)

Novel hybrid machine learning optimizer algorithms to prediction of fracture density by petrophysical data; Journal of Petroleum Exploration and Production; Vol. 11, iss. 12
Udgivet: (2021)

«Smart» materials based on epoxy vitrimers; Химия и химическая технология в XXI веке; Т. 2
af: Manapova E. E.
Udgivet: (2025)

Improvement of the Thermal Behaviour of Epoxy/Fe Nanoparticle Composites by the Addition of Flame Retardants; Journal of Inorganic and Organometallic Polymers and Materials; Vol. 35, iss. 12
Udgivet: (2025)

Acoustic emission study on the effect of notch shape and temperature on elastic energy release during impact testing of 17Mn1Si pipe steel; Engineering Fracture Mechanics; Vol. 210
Udgivet: (2019)

Brittle fracture strength analysis for reactor pressure vessel of VVER-1000 reactor unit; Journal of Economics and Social Sciences; № 16
Udgivet: (2020)

Investigation of proeprties of hybrid CFRP/SWCNTcompsites; Современные материалы и технологии новых поколений
af: Burkov M. V. Mikhail Vladimirovich
Udgivet: (2019)

Novel method for fracture propagation analysis after multistage refracturing on horizontal wells; Journal of Economics and Social Sciences; № 17
af: Nabokin I. Ilia
Udgivet: (2021)

Targeted micronutrient nanofertilizers of injectable actions based on Cu/B/I halloysite nanotube composites; Microporous and Mesoporous Materials; Vol. 394
Udgivet: (2025)

Hybrid lead-free polymer-based nanocomposites with improved piezoelectric response for biomedical energy-harvesting applications: A review; Nano Energy; Vol. 62
Udgivet: (2019)

Scale levels of quasi-static and dynamic fracture behavior of Ti-6Al-4V parts built by various additive manufacturing methods; Theoretical and Applied Fracture Mechanics; Vol. 110
Udgivet: (2020)

Fracture resistance of the deposited metal under dynamic and cyclic loading; Structural Integrity and Life; Vol. 24, № 2
Udgivet: (2024)