Study of craters formed on surface of AISI 321 stainless steel after high power ion-beam exposure

Study of craters formed on surface of AISI 321 stainless steel after high power ion-beam exposure

Bibliographic Details
Parent link:	Vacuum Vol. 198.— 2022.— [110852, 8 p.]
Corporate Author:	Национальный исследовательский Томский политехнический университет Исследовательская школа физики высокоэнергетических процессов
Other Authors:	Zhidkov M. V. Mikhail, Legachyov A. E. Aleksandr Evgenjevich, Golosov E. V. Evgeny Vitaljevich, Gazizova M. Yu. Marina Yurjevna, Pavlov S. K. Sergey Konstantinovich, Remnev G. E. Gennady Efimovich
Summary:	Title screen Surface topography and elemental composition of craters formed on the surface of AISI 321 stainless steel after processing with powerful pulsed flows of Cn+ and H+ ions (accelerating voltage: 250 keV, pulse duration: approximately 100 ns) are studied. Processing is performed using single-pulse fluences of 1 and 3 J/cm2, with the number of pulses ranging from 1 to 50. It is determined that the average size of the craters increases and the number of craters decreases with an increase in the number of impact pulses. The average size and number of craters are not dependent on the degree of preliminary deformation of the samples. Based on the applied processing parameters, it is established that titanium sulfide or titanium carbosulfide inclusions are the preferred crater sites. Furthermore, the crater structure is examined through electron backscatter diffraction analysis. The structure and phase composition of the craters formed on steel as a result of exposure to a pulsed ion beam do not differ from the structural-phase state of the crater-free regions. Режим доступа: по договору с организацией-держателем ресурса
Published:	2022
Subjects:	электронный ресурс труды учёных ТПУ AISI 321 stainless steel high-power ion beam (HPIB) crater нержавеющая сталь ионные пучки кратеры
Online Access:	https://doi.org/10.1016/j.vacuum.2021.110852
Format:	Electronic Book Chapter
KOHA link:	https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=668609

Similar Items

Influence of Surface Sputtering during High-Intensity, Hot Ion Implantation on Deep Alloying of Martensitic Stainless Steel
Published: (2023)

Study of the Structure of Crater at the Surface of 12Cr18Ni10Ti Steel Irradiated by High-Power Pulsed Ion Beam
Published: (2018)

Modification of the microstructure and properties of martensitic steel during ultra-high dose high-intensity implantation of nitrogen ions
Published: (2020)

Investigation of the interaction of liquid tin-lithium alloy with austenitic stainless steel at high temperatures
Published: (2023)

The Effect of Welding Mode Parameters on the Operational Properties of Flexible Compensating Elements Made of Austenitic Stainless Steels
Published: (2023)

Structural-phase State of Cold Deformed Stainless Steel after High Power Pulsed Ion Beam Processing
Published: (2020)

Effect of High-Power Ion Beams on the Surface Topography and Structure of the Subsurface Layer of Submicrocrystalline Titanium Alloys
Published: (2019)

Crater formation on the surface of refractory alloys during high-power ion-beam processing
Published: (2007)

Ion Plasma Passivation of X10CrNiTi18-9 Stainless Steel Samples
Published: (2016)

Temperature gradients in targets at low energy high-intensity ion implantation
Published: (2020)

The morphology of the deformation relief and the grain boundary role in the bicrystals of AISI 316 steel
by: Alferova (Alfyorova) E. A. Ekaterina Aleksandrovna
Published: (2020)

The effect of indium-tin oxide coatings on the formation of craters on glass surfaces under the impact of high-velocity microparticles
Published: (2023)

The effect of crater creation on the fatigue strength and corrosion resistance of steels and titanium alloys irradiated by high-power pulsed ion beams
by: Shulov V. A.
Published: (2002)

Production of Workpieces from Martensitic Stainless Steel Using Electron-Beam Surfacing and Investigation of Cutting Forces When Milling Workpieces
Published: (2023)

Temperature Gradients in the Targets During High-Intensity Implantation in Forced Cooling
Published: (2020)

Formation of nanoscale carbon structures in the surface layer of metals under the impact of high intensity ion beam
Published: (2014)

Oбработка поверхности стали 12х18н10т мощными импульсными пучками ионов водорода и углерода
Published: (2014)

Исследование структуры и свойств порошковой стали AISI 410
Published: (2022)

Investigation of the Resistance of K-208 Glass with Optically Transparent Al–Si–N Nanocomposite Coatings to High-Speed Microparticle Impact
Published: (2019)

Surface Doping of Steel with an Intense Pulsed Electron Beam
Published: (2018)

Comparative study of shock-wave hardening and substructure evolution of 304L and Hadfield steels irradiated with a nanosecond relativistic high-current electron beam
Published: (2017)

Effect of Preliminary Irradiation of 321 Steel Substrates with High-Intense Pulsed Ion Beams on Scratch Test Results of Subsequently Deposited AlN Coatings
Published: (2021)

Application of diffuse discharges of atmospheric pressure formed by runaway electrons for modification of copper and stainless steel surface
by: Tarasenko V. F. Victor Fedotovich
Published: (2015)

Modification of stainless steel by low-energy focused nitrogen ion beam
Published: (2018)

Prediction and stabilization of initial resistance between electrodes for small-scale resistance spot welding
by: Akbolatov E. Z. Eldos Zhannuruly
Published: (2019)

Исследование качества обработки поверхности при фрезеровании коррозионностойкой стали 08Х18Н10Г2М2 с крупнокристаллической и ультрамелкозернистой структурой
by: Филиппов А. В. Андрей Владимирович
Published: (2019)

High Chromium Steel Modification by the Intense Discrete Electron Beam: Structure and Properties
Published: (2018)

Pore Formation during Laser Welding in Different Spatial Positions
Published: (2020)

The formation of a crater on the surface of the cathode in the explosion of micro tip
Published: (2016)

Применение планетарной шаровой мельницы для получения экранирующих композиционных покрытий на основе полиэфирных порошковых красок для защиты магниевых сплавов
Published: (2015)

Изменение рельефа поверхности магния под действием мощных потоков ионов углерода
Published: (2014)

A high-current electron beam application for the surface modification of iron, stainless steel, and heat resistant alloys
Published: (2009)

Craters on the Surface Metal After HPIB of Carbon Ions
by: Potemkin G. V. Gely Valerjyanovich
Published: (2019)

Модификация аустенитно-мартенситной стали ВНС-5 ионно-пучковыми и химическими методами. Анализ электрохимических свойств
by: Хабибова Е. Д.
Published: (2024)

The Effect of Annealing on Structure and Phase Composition of Ultrafine-Grained AISI 321 Stainless Steel
Published: (2018)

Origin of John’s Stone: A quartzitic boulder from the site of the 1908 Tunguska (Siberia) explosion
Published: (2015)

Influence of high intensity ion beam irradiation on impact toughness of 12Cr1MoV steel
Published: (2016)

The Influence of Modification on Crystal Lattice Stability of Austenite in Stainless Steel
Published: (2018)

Structure and properties of steel produced by metal injection molding
Published: (2017)

Overview Information Systems for Calculating Processes Welding Stainless Steels
Published: (2018)