In Situ Studies of Strain Fields in Titanium Welds under Tensile Loads by Digital Image Correlation Method; Solid State Phenomena; Vol. 328

In Situ Studies of Strain Fields in Titanium Welds under Tensile Loads by Digital Image Correlation Method; Solid State Phenomena; Vol. 328

Бібліографічні деталі
Parent link:	Solid State Phenomena Vol. 328.— 2022.— [P. 83-92]
Співавтор:	Национальный исследовательский Томский политехнический университет Инженерная школа новых производственных технологий Отделение материаловедения
Інші автори:	Klopotov A. A. Anatoly Anatoljevich, Slobodyan M. S. Mikhail Stepanovich, Klimenov V. A. Vasily Aleksandrovich, Kurgan K. A. Kirill Andreevich, Ustinov A. M. Artem Mikhaylovich
Резюме:	Title screen The paper reports changes in strain fields on welded sample surfaces from commercial pure titanium, joined by both laser beam welding (LBW) and gas tungsten arc welding (GTAW) procedures, under uniaxial tensile loads. Their dynamics were investigated by the digital image correlation method using a ‘Vic-3D’ optical system. In addition, stress-strain curves were drawn in both ?eng-?eng and ?true-?true coordinates. It was shown that the laser welded sample was characterized by a higher ultimate tensile strength to yield point ratio than the as-received one. The GTAW sample fractured under much less stresses than the LBW one.
Мова:	Англійська
Опубліковано:	2022
Предмети:	электронный ресурс труды учёных ТПУ butt welds digital image correlation method strain fields titanium швы цифровые изображения деформации титан
Онлайн доступ:	https://doi.org/10.4028/p-9u7g66
Формат:	Електронний ресурс Частина з книги
KOHA link:	https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=668125

Схожі ресурси

Applying Digital Image Correlation Technique for Studying the Growth of a Fatigue Crack in VT23 Titanium Alloy Welded Joints; Russian Journal of Nondestructive Testing; Vol. 55, iss. 5
Опубліковано: (2019)

Pydic: 2D-DIC Code Accuracy Evaluation for Strain Field Measurements; Electron Devices and Materials (EDM)
за авторством: Abouellail A. F. A. Abdelmeguid Fathy Ahmed
Опубліковано: (2024)

Pulsed laser welding of Zr1%Nb alloy; Nuclear Engineering and Technology; Vol. 51, iss. 3
за авторством: Yolkin M. A. Maksim Aleksandrovich
Опубліковано: (2019)

Digital image correlation (DIC): Decorrelation problem due to large strains; Перспективы развития фундаментальных наук; Т. 7 : IT-технологии и электроника
за авторством: Abouellail A. F. A. Abdelmeguid Fathy Ahmed
Опубліковано: (2024)

Optical Inspection of Surfaces under Large Strains Using Digital Image Correlation; Atmospheric and Oceanic Optics; Vol. 38, iss. 3
за авторством: Abouellail A. F. A. Abdelmeguid Fathy Ahmed
Опубліковано: (2025)

Accuracy Enhancement in 2D Digital Image Correlation: A Comparative Study of Bi-Cubic, Cubic, and Spline Interpolation Methods; IEEE Instrumentation & Measurement Magazine; Vol. 29, iss. 2
за авторством: Abouellail A. F. A. Abdelmeguid Fathy Ahmed
Опубліковано: (2026)

Influence of gas shielding method in welding with consumable electrode on heat distribution in a welded product; Solid State Phenomena; Vol. 265 : Materials Engineering and Technologies for Production and Processing III
за авторством: Chinakhov D. A. Dmitriy Anatol'evich
Опубліковано: (2017)

Effect of ultrasound on interface morphology and strength of titanium and aluminum alloys joints produced by friction stir welding; Physical Mesomechanics; Vol. 26, iss. 1
Опубліковано: (2023)

The Structure and Properties of Microcrystalline and Submicrocrystalline Titanium Alloy VT1-0 in the Area of the Electron Beam Welding Seam; Russian Physics Journal; Vol. 60, iss. 6
Опубліковано: (2017)

Regular Features of Stage Formation in the Stress-strain Curves and Microstructure in the Zone of Fracture of Coarse-Grained and Ultrafine-Grained Titanium and Zirconium Alloys; Russian Physics Journal; Vol. 62, iss. 8
Опубліковано: (2019)

Comparative Analysis of Weld Microstructure in Ti-6Al-4V Samples Produced by Rolling and Wire-Feed Electron Beam Additive Manufacturing; Physical Mesomechanics; Vol. 26, iss. 6
Опубліковано: (2023)

Strain-Induced Surface Roughening in Polycrystalline VT1-0 Titanium Specimens under Uniaxial Tension; Physical Mesomechanics; Vol. 21, iss. 3
Опубліковано: (2018)

Effects of preheating and slow cooling stages in small-scale resistance spot welding of the Ti-2Al-1Mn alloy; International Journal of Advanced Manufacturing Technology; Vol. 128, iss/ 7-8
Опубліковано: (2023)

The Correlation Between Earth Heat Flow and Oil and Gas Potential - Fundamental Pattern of Western Siberia: Chap.; Innovation and Discovery in Russian Science and Engineering (IDRSE); Heat-Mass Transfer and Geodynamics of the Lithosphere
за авторством: Galieva M. F. Margarita Faritovna
Опубліковано: (2021)

Effect of Protective Coatings in Welded Constructions on Welding Stability and Electrode Metal Transfer into a Weld Pool in MMA; Solid State Phenomena; Vol. 303
Опубліковано: (2020)

Experimental Evaluation of 2D-DIC Limitations for Hightemperature Surface Inspection: Speckle Degradation, Oxidation, and Out-of-Plane Motion; IEEE Instrumentation & Measurement Magazine; Vol. 29, iss. 2
за авторством: Abouellail A. F. A. Abdelmeguid Fathy Ahmed
Опубліковано: (2026)

Study of Hydrogen Migration in Titanium Using a Vortex Electromagnetic Field and Accelerated Electrons in Subthreshold Values; Journal of Surface Investigation. X-ray, Synchrotron and Neutron Techniques; Vol. 18, iss. 3
за авторством: Tyurin Yu. I. Yuri Ivanovich
Опубліковано: (2024)

Стенд для исследований усталостного разрушения комбинацией методов акустической эмиссии, картирования деформации на поверхности и тензометрии; Известия Томского политехнического университета [Известия ТПУ]; Т. 325, № 2 : Математика, физика и механика
Опубліковано: (2014)

Автоматизация расчета напряженно-деформированного состояния сварных конструкций общего назначения в программной среде Salome_Meca; Известия Томского политехнического университета [Известия ТПУ]. Промышленная кибернетика; Т. 3, №1
за авторством: Жуковец М. В. Михаил Владимирович
Опубліковано: (2025)

The Structure and Mechanical Properties of VT23 Welded Joints with Surface Layer Modified by Ultrasonic Mechanical Forging; Key Engineering Materials; Vol. 743 : High Technology: Research and Applications (HTRA 2016)
Опубліковано: (2017)

Влияние постоянного и переменного магнитных полей на процесс выделения водорода из циркония и титана; Перспективы развития фундаментальных наук; Т. 1 : Физика
за авторством: Ма Ли
Опубліковано: (2025)

The Effect of Energy Parameters of Power Sources on the Structure and Properties of Permanent Joints at Manual Arc Welding; Metals; Vol. 14, iss. 7
за авторством: Ilyashchenko D. P. Dmitry Pavlovich
Опубліковано: (2024)

Titanium Macroparticle Fraction Suppression with Steered Arc And Negative Pulse Biasing; Journal of Industrial Pollution Control; Vol. 32, iss. 2
Опубліковано: (2016)

Calculation of Stress-Strain State and Contact Stresses in the Process of Chip Formation; Solid State Phenomena; Vol. 313
за авторством: Proskokov A. V. Andrey Vladimirovich
Опубліковано: (2021)

Stability of MMA welding with protective coatings; Structural Integrity and Life; Vol. 20, № 1
Опубліковано: (2020)

Особенности формирования сварного шва при имитации электронно-лучевой сварки толстостенных образцов ВТ6, полученных электронно-лучевой аддитивной; Перспективы развития фундаментальных наук; Т. 1 : Физика
за авторством: Яхин А. Альберт
Опубліковано: (2025)

Модификация микроструктуры в процессе ультразвуковой ударной электроискровой обработки сварных швов образцов ВТ6, полученных прокаткой и электронно-лучевой аддитивной технологией; Перспективы развития фундаментальных наук; Т. 1 : Физика
за авторством: Яхин А. Альберт
Опубліковано: (2025)

Influence of Welding Regimes on Structure and Properties of Steel 12KH18N10T Weld Metal in Different Spatial Positions; Metallurgist; Vol. 65, iss. 11-12
Опубліковано: (2022)

Assessment of Negative Influence of Manganese in Welding Fumes on Welder's Health and Ways to Reduce it; FME Transactions; Vol. 48, No. 1
Опубліковано: (2019)

Influence of Nanostructured Powder Modifiers on the Structure of a Welding Bead; Advanced Materials Research; Vol. 872
Опубліковано: (2014)

Research of the current type effect and its modulation algorithm on the performance of welded joints; Welding International; Vol. 34, iss. 1-3
Опубліковано: (2020)

Associations Between Heart Rate Variability-Derived Indexes and Training Load: Repeated Measures Correlation Approach Contribution; Journal of Strength and Conditioning Research; Vol. 36, iss. 7
Опубліковано: (2022)

Технология профилактического поворота трубопровода, подверженного канавочной коррозии; Известия Томского политехнического университета [Известия ТПУ]. Инжиниринг георесурсов; Т. 336, № 7
Опубліковано: (2025)

К вопросу обработки результатов геотехнического мониторинга за осадками сооружений; Известия Томского политехнического университета [Известия ТПУ]. Инжиниринг георесурсов; Т. 330, № 8
за авторством: Кулешов А. П. Александр Петрович
Опубліковано: (2019)

Electron Beam Welding of Dissimilar Materials; Key Engineering Materials; Vol. 743 : High Technology: Research and Applications (HTRA 2016)
за авторством: Frolov V. A.
Опубліковано: (2017)

Особенности эволюции структуры титанового сплава ВТ6 в субмикрокристаллическом состоянии при сверхпластической деформации; Известия Томского политехнического университета [Известия ТПУ]; Т. 325, № 2 : Математика, физика и механика
за авторством: Раточка И. В. Илья Васильевич
Опубліковано: (2014)

Optimization of Welding Parameters for Small-Scale Resistance Spot Welding of Zirconium Alloys; Materials Science Forum; Vol. 970 : Modern Problems in Materials Processing, Manufacturing, Testing and Quality Assurance II
за авторством: Slobodyan M. S. Mikhail Stepanovich
Опубліковано: (2019)

Hydrogen Effect on the Evolution of the Structural-Phase State and Superplastic Properties of Ultrafine-Grained Ti-Al-V-Mo Alloy; Physical Mesomechanics; Vol. 25, iss. 5
Опубліковано: (2022)

Structure and Phase Composition of Welded Joints Modified by Different Welding Techniques; AIP Conference Proceedings; Vol. 1909 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2017 (AMHS’17)
Опубліковано: (2017)

Investigation of High-Intensity Implantation of Titanium Ions into Silicon under Conditions of Beam Energy Impact on the Surface; Journal of Surface Investigation. X-ray, Synchrotron and Neutron Techniques; Vol. 18, iss. 5
Опубліковано: (2024)