Evaporation modes of LiBr, CaCl2, LiCl, NaCl aqueous salt solution droplets on aluminum surface; International Journal of Heat and Mass Transfer; Vol. 126, pt. A

Dades bibliogràfiques
Parent link:International Journal of Heat and Mass Transfer
Vol. 126, pt. A.— 2018.— [P. 161-168]
Autor corporatiu: Национальный исследовательский Томский политехнический университет Исследовательская школа физики высокоэнергетических процессов, Национальный исследовательский Томский политехнический университет Инженерная школа энергетики Научно-образовательный центр И. Н. Бутакова (НОЦ И. Н. Бутакова)
Altres autors: Kuznetsov G. V. Geny Vladimirovich, Feoktistov D. V. Dmitriy Vladimirovich, Orlova E. G. Evgeniya Georgievna, Misyura S. Ya. Sergey Yakovlevich, Morozov V. S. Vladimir Sergeevich, Islamova A. G. Anastasiya Gomilievna
Sumari:Title screen
The evaporation of droplets of the LiBr, CaCl2, LiCl and NaCl aqueous salt solutions were studied experimentally and their evaporation characteristics were compared to droplets of distilled water. The geometrical parameters of droplets (contact angle, height, and diameter) were measured using three methods of data processing: tangential methods (T) and the Young-Laplace method (Y-L). Scattering of the measured data does not depend on the processing method selected for large contact angles. However, in the case of small contact angles, the Y-L method exhibited the smallest measurement error. An optical method allowed for measuring the contact angle of salt solutions droplets just prior to crystallization. The experiments have shown that crystalline hydrates grow near the contact line and distort the droplet profile. The contact angles of salt solution droplets were found to depend on time in a non-linear manner. Typical evaporation modes of the studied aqueous salt solutions are detected: 1 - increasing the contact diameter; 2 - pinning the droplet; 3 - formation of salt crystals (NaCl) or crystalline hydrates (LiBr, CaCl2 and LiCl).
Idioma:anglès
Publicat: 2018
Matèries:
Accés en línia:https://doi.org/10.1016/j.ijheatmasstransfer.2018.05.040
Format: MixedMaterials Electrònic Capítol de llibre
KOHA link:https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=666916

MARC

LEADER 00000naa0a2200000 4500
001 666916
005 20250403072126.0
035 |a (RuTPU)RU\TPU\network\38120 
035 |a RU\TPU\network\37028 
090 |a 666916 
100 |a 20220204d2018 k||y0rusy50 ba 
101 0 |a eng 
102 |a NL 
135 |a drcn ---uucaa 
181 0 |a i  
182 0 |a b 
200 1 |a Evaporation modes of LiBr, CaCl2, LiCl, NaCl aqueous salt solution droplets on aluminum surface  |f G. V. Kuznetsov, D. V. Feoktistov, E. G. Orlova [et al.] 
203 |a Text  |c electronic 
300 |a Title screen 
320 |a [References: 36 tit.] 
330 |a The evaporation of droplets of the LiBr, CaCl2, LiCl and NaCl aqueous salt solutions were studied experimentally and their evaporation characteristics were compared to droplets of distilled water. The geometrical parameters of droplets (contact angle, height, and diameter) were measured using three methods of data processing: tangential methods (T) and the Young-Laplace method (Y-L). Scattering of the measured data does not depend on the processing method selected for large contact angles. However, in the case of small contact angles, the Y-L method exhibited the smallest measurement error. An optical method allowed for measuring the contact angle of salt solutions droplets just prior to crystallization. The experiments have shown that crystalline hydrates grow near the contact line and distort the droplet profile. The contact angles of salt solution droplets were found to depend on time in a non-linear manner. Typical evaporation modes of the studied aqueous salt solutions are detected: 1 - increasing the contact diameter; 2 - pinning the droplet; 3 - formation of salt crystals (NaCl) or crystalline hydrates (LiBr, CaCl2 and LiCl). 
461 |t International Journal of Heat and Mass Transfer 
463 |t Vol. 126, pt. A  |v [P. 161-168]  |d 2018 
610 1 |a электронный ресурс 
610 1 |a труды учёных ТПУ 
610 1 |a contact angle 
610 1 |a crystalline hydrate 
610 1 |a desorption 
610 1 |a evaporation mode 
610 1 |a salt solution 
610 1 |a контактные углы 
610 1 |a кристаллогидраты 
610 1 |a десорбция 
610 1 |a испарения 
610 1 |a солевые растворы 
701 1 |a Kuznetsov  |b G. V.  |c Specialist in the field of heat power energy  |c Professor of Tomsk Polytechnic University, Doctor of Physical and Mathematical Sciences  |f 1949-  |g Geny Vladimirovich  |3 (RuTPU)RU\TPU\pers\31891  |9 15963 
701 1 |a Feoktistov  |b D. V.  |c Specialist in the field of thermal engineering  |c Associate Professor; Deputy Director of Tomsk Polytechnic University, Candidate of technical sciences  |f 1983-  |g Dmitriy Vladimirovich  |y Tomsk  |3 (RuTPU)RU\TPU\pers\34158  |9 17698 
701 1 |a Orlova  |b E. G.  |c specialist in the field of thermal engineering  |c Associate Professor of Tomsk Polytechnic University, Candidate of Physical and Mathematical Sciences  |f 1991-  |g Evgeniya Georgievna  |3 (RuTPU)RU\TPU\pers\34157  |9 17697 
701 1 |a Misyura  |b S. Ya.  |c specialist in the field of power engineering  |c leading researcher of Tomsk Polytechnic University, candidate of technical sciences  |f 1964-  |g Sergey Yakovlevich  |3 (RuTPU)RU\TPU\pers\39641 
701 1 |a Morozov  |b V. S.  |g Vladimir Sergeevich 
701 1 |a Islamova  |b A. G.  |c specialist in the field of thermal engineering  |c Engineer of Tomsk Polytechnic University  |f 1993-  |g Anastasiya Gomilievna  |3 (RuTPU)RU\TPU\pers\37306 
712 0 2 |a Национальный исследовательский Томский политехнический университет  |b Исследовательская школа физики высокоэнергетических процессов  |c (2017- )  |3 (RuTPU)RU\TPU\col\23551 
712 0 2 |a Национальный исследовательский Томский политехнический университет  |b Инженерная школа энергетики  |b Научно-образовательный центр И. Н. Бутакова (НОЦ И. Н. Бутакова)  |3 (RuTPU)RU\TPU\col\23504 
801 2 |a RU  |b 63413507  |c 20221024  |g RCR 
856 4 |u https://doi.org/10.1016/j.ijheatmasstransfer.2018.05.040 
942 |c CF