Thermal Stability and Flammability of Epoxy Composites Filled with Multi-Walled Carbon Nanotubes, Boric Acid, and Sodium Bicarbonate; Polymers; Vol. 13, iss. 4

Thermal Stability and Flammability of Epoxy Composites Filled with Multi-Walled Carbon Nanotubes, Boric Acid, and Sodium Bicarbonate; Polymers; Vol. 13, iss. 4

Xehetasun bibliografikoak
Parent link:	Polymers Vol. 13, iss. 4.— 2021.— [638, 11 p.]
Erakunde egilea:	Национальный исследовательский Томский политехнический университет Инженерная школа неразрушающего контроля и безопасности Отделение контроля и диагностики
Beste egile batzuk:	Nazarenko O. B. Olga Bronislavovna, Amelkovich Yu. A. Yuliya Alexandrovna, Bannov A. G. Aleksandr Georgievich, Berdyugina I. S. Irina Sergeevna, Putkhenpurakalchira M. V. Maniyan Visakkh
Gaia:	Title screen Epoxy composites filled with 0.5 wt% of multi-walled carbon nanotubes (MWCNTs), 10 and 15 wt% of boric acid and sodium bicarbonate separately, as well as composites filled with a combination of MWCNTs-boric acid and MWCNTs-sodium bicarbonate were prepared. The thermal behavior of the prepared samples was investigated under heating in oxidative environment using thermogravimetric analysis. The hardness was measured using the Shore D hardness test. To evaluate the flammability of the samples, the ignition temperature and time-to-ignition were determined. It was concluded that sodium bicarbonate in the studied concentrations (10 and 15 wt%) is not appropriate for use as a filler capable of improving the thermooxidative stability and reducing the flammability of epoxy polymers. The improvement in the thermal properties can be achieved by using the combination of boric acid and multi-walled carbon nanotubes as fillers. The thermooxidative destruction of the samples filled with boric acid passes more slowly and more evenly via the formation of B2O3 as a result of its decomposition.
Hizkuntza:	ingelesa
Argitaratua:	2021
Gaiak:	электронный ресурс труды учёных ТПУ epoxy composites biopolymers thermal degradation flammability carbon nanotubes boric acid sodium bicarbonate эпоксидные композиты термическая деструкция горючесть углеродные нанотрубки борная кислота
Sarrera elektronikoa:	http://earchive.tpu.ru/handle/11683/71101 https://doi.org/10.3390/polym13040638
Formatua:	Baliabide elektronikoa Liburu kapitulua
KOHA link:	https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=666419

Antzeko izenburuak

Thermal Behavior and Flammability of Epoxy Composites Based on Multi-Walled Carbon Nanotubes and Expanded Graphite: A Comparative Study; Applied Sciences; Vol. 10, iss. 19
Argitaratua: (2020)

Effect of zeolite and boric acid on epoxy-based composites; Polymers for Advanced Technologies; Vol. 27, iss. 8
Argitaratua: (2016)

Epoxy Composites Filled with Sodium Bicarbonate: Thermal and Mechanical Properties; Key Engineering Materials; Vol. 781 : Radiation-Thermal Effects and Processes in Inorganic Materials
nork: Murashkina Yu. Yuliya
Argitaratua: (2018)

Combined effect of zeolite and boric acid on thermal behavior of epoxy composites; Journal of Thermal Analysis and Calorimetry; Vol. 128, iss. 1
nork: Nazarenko O. B. Olga Bronislavovna
Argitaratua: (2017)

Исследование температуры воспламенения эпоксидных композитов, наполненных нанопорошком алюминия; Ресурсосберегающие технологии в контроле, управлении качеством и безопасности
Argitaratua: (2024)

Enhancement of mechanical and electrical properties of epoxy-based composites filled with intact or oxidized carbon nanotubes; Composites: Mechanics, Computations, Applications: An International Journal; Vol. 10, iss. 3
Argitaratua: (2019)

Thermooxidative Degradation of Composites Based on Epoxy Resin and Metal Nanopowders; Materials Science Forum; Vol. 942 : Modern Problems in Materials Processing, Manufacturing, Testing and Quality Assurance
nork: Lipchansky D. S. Dmitry Sergeevich
Argitaratua: (2019)

Emerging Trends for ZnO Nanoparticles and Their Applications in Food Packaging; ACS Food Science & Technology; Vol. 2, iss. 5
Argitaratua: (2022)

Влияние наполнителей на основе борной кислоты на горючесть эпоксидных композитов; Экология и безопасность в техносфере: современные проблемы и пути решения
nork: Мельникова Т. В.
Argitaratua: (2014)

Влияние борной кислоты на характеристики горючести эпоксидных полимеров; Вестник науки Сибири; № 15 : Спецвыпуск
nork: Мельникова Т. В. Татьяна Вячеславовна
Argitaratua: (2015)

Thermal properties of epoxy composites filled with boric acid; IOP Conference Series: Materials Science and Engineering; Vol. 81 : Radiation-Thermal Effects and Processes in Inorganic Materials
Argitaratua: (2015)

Влияние борной кислоты на газообразные продукты термоокислительной деструкции эпоксидных композитов; Химия и химическая технология в XXI веке; Т. 2
nork: Бухарева П. Б.
Argitaratua: (2015)

Влияние борной кислоты на фазообразование в системе «гидроксид кальция – нанопорошок алюминия» in situ; Известия Томского политехнического университета [Известия ТПУ]. Инжиниринг георесурсов; Т. 337, № 4
Argitaratua: (2026)

Effect of iron nanopowder on flammability of epoxy composites; IOP Conference Series: Materials Science and Engineering; Vol. 1019 : 14th International Forum on Strategic Technology (IFOST 2019)
nork: Nazarenko O. B. Olga Bronislavovna
Argitaratua: (2021)

Разработка огнестойких эпоксидных композиционных материалов, наполненных нанопорошком железа и борной кислотой; Инновационные технологии в машиностроении
nork: Назаренко О. Б. Ольга Брониславовна
Argitaratua: (2020)

Boron Nitride Nanotubes Versus Carbon Nanotubes: A Thermal Stability and Oxidation Behavior Study; Nanomaterials; Vol. 10, iss. 12
Argitaratua: (2020)

«Smart» materials based on epoxy vitrimers; Химия и химическая технология в XXI веке; Т. 2
nork: Manapova E. E.
Argitaratua: (2025)

Изучение изменчивости реологических свойств дисперсий биополимеров на водной основе в составе буровых растворов; Известия Томского политехнического университета [Известия ТПУ]. Инжиниринг георесурсов; Т. 334, № 8
nork: Ламбин А. И. Анатолий Иванович
Argitaratua: (2023)

Effect of Boric Acid on Volatile Products of Thermooxidative Degradation of Epoxy Polymers; Journal of Physics: Conference Series; Vol. 671 : Innovations in Non-Destructive Testing (SibTest 2015)
Argitaratua: (2016)

The features of heterogeneous water droplet evaporation in high-temperature combustion products of typical flammable liquids; Thermal Science; Vol. 21, iss. 2
Argitaratua: (2017)

The influence of single-walled carbon nanotubes additives on the structure and hydrogenation behavior of magnesium hydride; Journal of Energy Storage; Vol. 119
Argitaratua: (2025)

Thermal and Mechanical Characteristics of Polymer Composites Based on Epoxy Resin, Aluminium Nanopowders and Boric Acid; Journal of Physics: Conference Series; Vol. 671 : Innovations in Non-Destructive Testing (SibTest 2015)
nork: Nazarenko O. B. Olga Bronislavovna
Argitaratua: (2016)

Preparation of regulatory documents for sodium heparin; Journal of Economics and Social Sciences; № 16
nork: Aseeva N. V. Natalya Valerevna
Argitaratua: (2020)

Improvement of the Thermal Behaviour of Epoxy/Fe Nanoparticle Composites by the Addition of Flame Retardants; Journal of Inorganic and Organometallic Polymers and Materials; Vol. 35, iss. 12
Argitaratua: (2025)

Identification of photolysis products of aqueous sodium thiosulfate solutions; High Energy Chemistry; Vol. 57, No. 3
Argitaratua: (2023)

A new approach to the economic synthesis of multi-walled carbon nanotubes using a Ni/MgO catalyst; Materials Chemistry and Physics; Vol. 261
Argitaratua: (2021)

Dynamics of destruction of epoxy composites filled with ultra-dispersed diamond under impact conditions; Mechanics of Advanced Materials and Structures; Vol. 27, No. 9
Argitaratua: (2020)

Mechanical and thermal properties of Moringa oleifera cellulose-based epoxy nanocomposites; Journal of Composite Materials; Vol. 53, iss. 5
Argitaratua: (2019)

Comparative study of the effect of flame retardants on the ignition temperature of epoxy composites; Eurasian Physical Technical Journal; Vol. 18, No. 2
Argitaratua: (2021)

Biodegradable Electrically Conductive Polycaprolacton-Based Composites Filled with Carbon Nanotubes; Russian Physics Journal; Vol. 62, iss. 10
nork: Lebedev S. M. Sergey Mikhailovich
Argitaratua: (2020)

Study on the interfacial interactions of sulfated alumina with epoxy polymer; Ceramics International; Vol. 45, iss. 7
Argitaratua: (2019)

Physico-chemical study of the systems on the basis of sodium and ammonium perchlorate; Bulletin of the Tomsk Polytechnic University; Vol. 310, № 1
Argitaratua: (2007)

Targeted micronutrient nanofertilizers of injectable actions based on Cu/B/I halloysite nanotube composites; Microporous and Mesoporous Materials; Vol. 394
Argitaratua: (2025)

Comparative assessment of fluorine, sodium, and lithium distributions in snow cover in Siberia; Pure and Applied Chemistry; Vol. 94, iss. 3
nork: Ianchenko N. I. Natalia Ivanovna
Argitaratua: (2022)

Effect of zeolite modification on mechanical properties of epoxy composites; 11th International Forum on Strategic Technology (IFOST 2016); Pt. 1
Argitaratua: (2016)

Пептизация и ингибирование набухания глин в присутствии угольной кислоты, бикарбонатных, карбонатных ионов и ионов кальция; Известия Томского политехнического университета [Известия ТПУ]. Инжиниринг георесурсов; Т. 335, № 2
Argitaratua: (2024)

Integration of Carbon Nanotubes in an HFCVD Diamond Synthesis Process in a Methane-Rich H2/CH4 Gas Mixture; Materials; Vol. 16, iss. 20
Argitaratua: (2023)

Partial Auxeticity of Laterally Compressed Carbon Nanotube Bundles; Physica Status Solidi RRL; Online Version
Argitaratua: (2021)

Variation of Vickers microhardness and compression strength of the bioceramics based on hydroxyapatite by adding the multi-walled carbon nanotubes; Applied Nanoscience; Vol. 10, iss. 8
Argitaratua: (2019)

Data on the structure, chemical state of carbon and discharge characteristics of multi-walled carbon nanotubes and composites based on them modified by pulsed ion beam; Data in Brief; Vol. 25
Argitaratua: (2019)