Deformation Behavior of Wrought and EBAM Ti-6Al-4V under Scratch Testing; Metals; Vol. 11, iss. 11

Deformation Behavior of Wrought and EBAM Ti-6Al-4V under Scratch Testing; Metals; Vol. 11, iss. 11

Podrobná bibliografie
Parent link:	Metals Vol. 11, iss. 11.— 2021.— [1882, 12 p.]
Další autoři:	Shugurov A. R. Artur Rubinovich, Panin A. V. Alexey Viktorovich, Kazachenok M. S. Marina Sergeevna, Kazantseva L. M. Lyudmila Mikhaylovna, Martynov S. A. Sergey Aleksandrovich, Bakulin A. V. Aleksandr Viktorovich, Kulkova S. E. Svetlana Evgenjevna
Shrnutí:	Title screen The microstructure, mechanical properties, and deformation behavior of wrought and electron beam additive manufactured (EBAM) Ti-6Al-4V samples under scratching were studied. As-received wrought Ti-6Al-4V was subjected to thermal treatment to obtain the samples with microstructure and mechanical characteristics similar to those of the EBAM samples. As a result, both alloys consisted of colonies of [alpha] phase laths within prior [beta] phase grains and were characterized by close values of hardness. At the same time, the Young's modulus of the EBAM samples determined by nanoindentation was lower compared with the wrought samples. It was found that despite the same hardness, the scratch depth of the EBAM samples under loading was substantially smaller than that of the wrought alloy. A mechanism was proposed, which associated the smaller scratch depth of EBAM Ti-6Al-4V with [alpha]′→[alpha]″ phase transformations that occurred in the contact area during scratching. Ab initio calculations of the atomic structure of V-doped Ti crystallites containing [alpha] or [alpha]″ phases of titanium were carried out to support the proposed mechanism.
Jazyk:	angličtina
Vydáno:	2021
Témata:	электронный ресурс труды учёных ТПУ wire-feed electron beam additive manufacturing Ti-6Al-4V microstructure scratchtesting phase transformations аддитивное производство проволока микроструктуры тестирование фазовые превращения деформационное поведение
On-line přístup:	http://earchive.tpu.ru/handle/11683/71114 https://doi.org/10.3390/met11111882
Médium:	Elektronický zdroj Kapitola
KOHA link:	https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=666364

Podobné jednotky

Microstructure and Phase Composition of 3D Printed Titanium Metal Matrix Composites Based on Ti-Al-V-Fe System and Reinforced with TiC Particles; Russian Physics Journal; Vol. 67, iss. 9
Vydáno: (2024)

Microstructure and scratch behavior of TiB/Ti-6Al-4V composites fabricated by wire-feed electron beam additive manufacturing; Materials Letters; Vol. 405
Vydáno: (2026)

Effect of Ultrasonic Impact Treatment on Microstructure and Fatigue Life of 3D Printed Ti–6Al–4V Titanium Alloy; Physics of Metals and Metallography; Vol. 124, iss. 10
Vydáno: (2023)

In situ study of phase transformations in electron beam additive manufactured Ti-6Al-4 V titanium alloy by high temperature synchrotron X-ray diffraction and TEM; Journal of Alloys and Compounds; Vol. 917
Autor: Perevalova O. B. Olga Borisovna
Vydáno: (2022)

The Effect of Heat Treatment on the Microstructure and Phase Composition of Wrought and 3D-Printed Ti–5Al–3Mo–1V Titanium Alloy Samples; Journal of Surface Investigation: X-ray, Synchrotron and Neutron Techniques; Vol. 17, Suppl. 1
Vydáno: (2023)

Transformations of the Microstructure and Phase Compositions of Titanium Alloys during Ultrasonic Impact Treatment Part III: Combination with Electrospark Alloying Applied to Additively Manufactured Ti-6Al-4V Titanium Alloy; Metals; Vol. 13, iss. 5
Vydáno: (2023)

Effects of Water Cooling on the Microstructure of Electron Beam Additive-Manufactured Ti-6Al-4V; Metals; Vol. 11, iss. 11
Vydáno: (2021)

Microstructure and Phase Composition of VT1-0, VT6, and VT14 Titanium Alloys Produced by Wire-Feed Electron-Beam Additive Manufacturing; Journal of Surface Investigation. X-ray, Synchrotron and Neutron Techniques; Vol. 16, iss. 6
Vydáno: (2022)

Microstructural Transformation and Enhanced Strength of Wire-Feed Electron-Beam Additive Manufactured Ti–6Al–4V Alloy Induced by High-Pressure Torsion; Advanced Engineering Materials; Vol. 26, iss. 4
Vydáno: (2024)

Hydrogen-Induced Phase Transformation and Microstructure Evolution for Ti-6Al-4V Parts Produced by Electron Beam Melting; Metals; Vol. 8, iss. 5
Vydáno: (2018)

Effect of Heat Input on the Microstructure and Phase Composition of Additively Manufactured Ti–6Al–4V Alloy; Journal of Surface Investigation. X-ray, Synchrotron and Neutron Techniques; Vol. 18, iss. 6
Autor: Kamelina K. D. Kristina Dmitrievna
Vydáno: (2024)

Comparative Analysis of Weld Microstructure in Ti-6Al-4V Samples Produced by Rolling and Wire-Feed Electron Beam Additive Manufacturing; Physical Mesomechanics; Vol. 26, iss. 6
Vydáno: (2023)

In Situ High-Temperature Synchrotron X-ray Studies of Microstructure and Phase Composition of Additively Fabricated Ti–6Al–4V/TiC Metal Matrix Composite; Journal of Surface Investigation: X-ray, Synchrotron and Neutron Techniques; Vol. 19, iss. 4
Vydáno: (2025)

Особенности формирования сварного шва в изделиях из титанового сплава Ti-6Al-4V, полученных аддитивными методами; Инновационные технологии в машиностроении
Autor: Яхин А. Альберт
Vydáno: (2020)

Recovery of Scratch Grooves in Ti-6Al-4V Alloy Caused by Reversible Phase Transformations; Metals; Vol. 10, iss. 10
Vydáno: (2020)

Deformation and Fracture of Ti-6Al-4V/TiC Composites 3D Printed using Wire-Feed Electron Beam Additive Manufacturing under Uniaxial Tensile Stress; Physical Mesomechanics; Vol. 28, iss. 6
Vydáno: (2025)

The High-Temperature In Situ Synchrotron Study of the Structural-Phase Transformations in 3D-Printed Ti–6Al–4V and Ti–5Al–3Mo–V Titanium Alloys; Physics of Metals and Metallography; Vol. 125, iss. 9
Vydáno: (2024)

Beam Current Effect on Microstructure and Properties of Electron-Beam-Melted Ti-6Al-4V Alloy; Journal of Materials Engineering and Performance; Vol. 28, iss. 10
Vydáno: (2019)

The Microstructural and Phase Evolution of the 3D Printed Ti-6Al-4V Alloy during Mechanical Loading; Physics of Metals and Metallography; Vol. 124, iss. 2
Vydáno: (2023)

Improving mechanical properties of wire-based EBAM Ti-6Al-4V parts by adding TiC powders; Material Design and Processing Communications (MDPS); Vol. 3, iss. 1
Vydáno: (2021)

Influence of manufacturing parameters on microstructure and hydrogen sorption behavior of electron beam melted titanium Ti-6Al-4V alloy; Materials; Vol. 11, iss. 5
Vydáno: (2018)

In-situ X-ray diffraction study of hydrogen-induced phase transformation in wire-feed electron-beam additive manufactured Ti-6Al-4V alloy; Journal of Alloys and Compounds; Vol. 1045
Vydáno: (2025)

Electron Beam Impact on Microstructure and Microhardness of Ti–6Al–4V Titanium Alloy Produced by Wire Electron-Beam Additive Manufacturing Technology and Selective Laser Alloying at Simulation of Electronic-Beam Welding; Physics of Metals and Metallography; Vol. 125, iss. 7
Vydáno: (2024)

From raw elements to 3D samples: An economical route for Co-Cr-Mo alloy fabrication; Journal of Alloys and Compounds; Vol. 978
Vydáno: (2024)

Heparin Enriched-WPI Coating on Ti6Al4V Increases Hydrophilicity and Improves Proliferation and Differentiation of Human Bone Marrow Stromal Cells; International Journal of Molecular Sciences; Vol. 23, iss. 10
Vydáno: (2022)

Functionalization of additive-manufactured Ti6Al4V scaffolds with poly(allylamine hydrochloride)/poly(styrene sulfonate) bilayer microcapsule system containing dexamethasone; Materials Chemistry and Physics; Vol. 273
Vydáno: (2021)

Surface Modification of the EBM Ti-6Al-4V Alloy by Pulsed Ion Beam; Metals; Vol. 11, iss. 3
Vydáno: (2021)

Increasing the Fatigue Durability of an 3D-Printed Ti-6Al-4V Alloy Electron-Beam Welded Joint by Ultrasonic Electropulsing Shock Treatment; Physics of Metals and Metallography; Vol. 123, iss. 12
Vydáno: (2022)

Influence of anisotropy properties and structural inhomogeneity on elasticity and fracture of titanium alloys produced by electron-beam melting; International Journal of Advanced Manufacturing Technology; Vol. 135
Vydáno: (2025)

The Effect of Nanoscale Mesoscopic Structural States Associated with Lattice Curvature on the Mechanical Behavior of Ti–6Al–4V Alloy; Physical Mesomechanics; Vol. 23, iss. 6
Vydáno: (2020)

Change in the Phase Composition and Lattice Parameters of the Solid Solution Based on a-Ti in the Surface Layers of the Ti–6Al–4V Alloy Subjected to Electron-Beam Treatment; Physics of Metals and Metallography; Vol. 121, iss. 2
Autor: Perevalova O. B. Olga Borisovna
Vydáno: (2020)

Способ получения титано-алюминиевых интерметаллических соединений направленного затвердевания на основе электронно-лучевой двухниточной плавкой проволоки; Прогрессивные технологии и экономика в машиностроении
Autor: Лю Юаньсюнь
Vydáno: (2023)

Микроструктура и микромеханизмы разрушения сплава системы Ni-Cr-Al, полученного методом электронно-лучевого аддитивного производства; Перспективы развития фундаментальных наук; Т. 1 : Физика
Autor: Лысунец М. А.
Vydáno: (2025)

In Situ Synchrotron Study of the Phase Transformations in Ti-5.7Al-1.6V-3Mo Titanium Alloy at High Temperature; Journal of Materials Engineering and Performance; Vol. 33, iss. 19
Autor: Perevalova O. B. Olga Borisovna
Vydáno: (2024)

Особенности формирования сварного шва при имитации электронно-лучевой сварки толстостенных образцов ВТ6, полученных электронно-лучевой аддитивной; Перспективы развития фундаментальных наук; Т. 1 : Физика
Autor: Яхин А. Альберт
Vydáno: (2025)

Effect of the Beam Current during the Electron-Beam Melting of Titanium Alloy Ti-6Al-4V on the Structural Features and Phase Transitions in Gas-Phase Hydrogenation; Journal of Surface Investigation. X-ray, Synchrotron and Neutron Techniques; Vol. 13, No. 3
Vydáno: (2019)

Process window for electron beam melting of Ti–42Nb wt.%; Journal of Materials Research and Technology; Vol. 25
Vydáno: (2023)

The Effect of Electron Beam Welding on the Microstructure and Microhardness of 3D-Printed Products from Titanium Alloy Ti-6Al-4V; Physics of Metals and Metallography; Vol. 122, iss. 2
Vydáno: (2021)

Модификация микроструктуры в процессе ультразвуковой ударной электроискровой обработки сварных швов образцов ВТ6, полученных прокаткой и электронно-лучевой аддитивной технологией; Перспективы развития фундаментальных наук; Т. 1 : Физика
Autor: Яхин А. Альберт
Vydáno: (2025)

Исследование структуры и свойств SLM-образцов ВТ6 обработанных комбинированным ультразвуковым и электрическим воздействием; Инновационные технологии в машиностроении
Autor: Панин С. В. Сергей Викторович
Vydáno: (2020)