Effect of radiation exposure on the structure and diffusion in the near-surface layer of ultrafine-grained nickel
Parent link: | Russian Physics Journal Vol. 64, iss. 5.— 2021.— [P. 859-865] |
---|---|
Інші автори: | Grabovskaya G. P. Galina Petrovna, Mishin I. P. Ivan Petrovich, Stepanova E. N. Ekaterina Nikolaevna, Teresov A. D. Anton Dmitrievich |
Резюме: | Title screen The effect of irradiation of ultrafine-grained (UFG) nickel with a pulsed electron beam (PEB) in the mode without surface melting on the copper diffusion in the near-surface layer is studied. The profiles of copper concentration distribution over the depth after isothermal diffusion annealing and PEB-irradiation annealing of the UFG nickel surface are determined. It is found out that as a result of PEB irradiation, the coefficient of grain-boundary diffusion of copper in nickel increases and the mode of grain-boundary heterodiffusion in the near-surface layer of nickel changes in comparison with isothermal diffusion annealing. Режим доступа: по договору с организацией-держателем ресурса |
Мова: | Англійська |
Опубліковано: |
2021
|
Предмети: | |
Онлайн доступ: | https://doi.org/10.1007/s11182-021-02400-8 |
Формат: | Електронний ресурс Частина з книги |
KOHA link: | https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=666222 |
Схожі ресурси
Numerical Simulation of Thermal Processes and the Effect of Heating of Near-Surface Layers of Titanium on the Diffusion Transfer of Dopants during High-Intensity Pulsed Ion Implantation
за авторством: Ivanova A. I. Anna Ivanovna
Опубліковано: (2023)
за авторством: Ivanova A. I. Anna Ivanovna
Опубліковано: (2023)
Effect of temperature and pulsed electron beam irradiation on the grain boundary ensemble of the ultrafine-grained molybdenum
Опубліковано: (2016)
Опубліковано: (2016)
Influence of Equal-Channel Angular Pressing on Grain Structure and Internal Stresses of Technically Pure Nickel
Опубліковано: (2023)
Опубліковано: (2023)
Features of thermal processes and the influence of pulsed heating of surface layers of titanium on the diffusion transfer of dopants during high-intensity ion implantation
за авторством: Gurulev A. V. Aleksandr Valerjevich
Опубліковано: (2023)
за авторством: Gurulev A. V. Aleksandr Valerjevich
Опубліковано: (2023)
Lattice Curvature and Mesoscopic Strain-Induced Defects as the Basis of Plastic Deformation in Ultrafine-Grained Metals
за авторством: Panin V. E. Viktor Evgenyevich
Опубліковано: (2018)
за авторством: Panin V. E. Viktor Evgenyevich
Опубліковано: (2018)
Investigation of the Features of High-Intensity Implantation of Nitrogen Ions into Titanium
Опубліковано: (2023)
Опубліковано: (2023)
Structure Effect on the Diffusion and Accumulation of Hydrogen in the Zr–1Nb Alloy
Опубліковано: (2022)
Опубліковано: (2022)
Grain-boundary diffusion of titanium in Zr-1 wt.%Nb alloy under irradiation with a pulsed electron beam
Опубліковано: (2024)
Опубліковано: (2024)
Characteristic Features of Ultrafine-Grained Ti-45 wt.% Nb Alloy under High Cycle Fatigue
Опубліковано: (2021)
Опубліковано: (2021)
Microstructure Stability and Mechanical Properties of Ultrafine-Grained Zirconium Alloy under Prolonged Thermal Exposure
Опубліковано: (2016)
Опубліковано: (2016)
Hydrogen-induced failure of TiNi based alloy with coarse-grained and ultrafine-grained structure
Опубліковано: (2016)
Опубліковано: (2016)
Effect of Irradiation with a Pulsed Electron Beam on Chromium Diffusion in the Zr–1 wt % Nb Alloy
Опубліковано: (2024)
Опубліковано: (2024)
Effect of hydrogen on the structural and phase state and the deformation behavior of the ultrafine-grained Zr–1Nb alloy
за авторством: Stepanova E. N. Ekaterina Nikolaevna
Опубліковано: (2015)
за авторством: Stepanova E. N. Ekaterina Nikolaevna
Опубліковано: (2015)
Infrared Thermography and Generation of Heat under Deformation of Bioinert Titanium- and Zirconium-Based Alloys
Опубліковано: (2019)
Опубліковано: (2019)
Structure and Phase Composition of Ultrafine-Grained TiNb Alloy after High-Temperature Annealings
Опубліковано: (2017)
Опубліковано: (2017)
Influence of ultrafine-grained structure of Ti-42Nb-7Zr alloy on energy dissipation and storage under quasi-static tension
Опубліковано: (2024)
Опубліковано: (2024)
Effect of Hydrogen on the Deformation Behavior and Localization of Plastic Deformation of the Ultrafine-Grained Zr–1Nb Alloy
Опубліковано: (2020)
Опубліковано: (2020)
Low energy, high intensity metal ion implantation method for deep dopant containing layer formation
Опубліковано: (2018)
Опубліковано: (2018)
Characteristics of Nanopowders Produced by Electrical Explosionof Tin–Lead Alloy Conductors in Air
за авторством: Ilyin A. P. Aleksandr Petrovich
Опубліковано: (2011)
за авторством: Ilyin A. P. Aleksandr Petrovich
Опубліковано: (2011)
Influence of Natural and Climatic Conditions on the Values of the Vertical Turbulent Diffusion Coefficient for Long Observation Periods
Опубліковано: (2022)
Опубліковано: (2022)
Evolution of the Structural-Phase State of a Titanium Alloy of the System Ti–Al–V–Mo During Formation of an Ultrafine-Grained Structure Using Reversible Hydrogenaтion
Опубліковано: (2019)
Опубліковано: (2019)
Structure and Phase Evolution in a SiC Ceramic Surface Layer During Electron-Beam Treatment
Опубліковано: (2018)
Опубліковано: (2018)
Hydrogen Effect on the Evolution of the Structural-Phase State and Superplastic Properties of Ultrafine-Grained Ti-Al-V-Mo Alloy
Опубліковано: (2022)
Опубліковано: (2022)
Engineering support for improving quality of layer-by-layer laser sintering
за авторством: Saprykin A. A. Aleksandr Aleksandrovich
Опубліковано: (2012)
за авторством: Saprykin A. A. Aleksandr Aleksandrovich
Опубліковано: (2012)
Effect of the structural and phase state on the deformation behavior and mechanical properties of the ultrafine-grained titanium alloy (Ti-Al-V-Мо) at temperatures in the range of 293-973 K
Опубліковано: (2021)
Опубліковано: (2021)
Влияние структуры материала на морфологию деформированной поверхности
за авторством: Филиппов А. В. Андрей Владимирович
Опубліковано: (2020)
за авторством: Филиппов А. В. Андрей Владимирович
Опубліковано: (2020)
Thin Bioactive Zn Substituted Hydroxyapatite Coating Deposited on Ultrafine-Grained Titanium Substrate: Structure Analysis
Опубліковано: (2018)
Опубліковано: (2018)
The Special Features of the Phase Formation and Distribution in the Titanium Nickelide Surface Layers Treated by Electron Beams
Опубліковано: (2015)
Опубліковано: (2015)
Regular Features of Stage Formation in the Stress-strain Curves and Microstructure in the Zone of Fracture of Coarse-Grained and Ultrafine-Grained Titanium and Zirconium Alloys
Опубліковано: (2019)
Опубліковано: (2019)
DIN 1.7035 Steel Modification with High Intensity Nitrogen Ion Implantation
Опубліковано: (2018)
Опубліковано: (2018)
Changing Mechanisms of High-Temperature Oxidation of Zr-1%Nb Alloy in Air and Steam by Surface Modification with Charged Particles
Опубліковано: (2025)
Опубліковано: (2025)
Research on the processes of deformation and failure in coarse- and ultrafine-grain states of Zr1–Nb alloys by digital image correlation and infrared thermography
Опубліковано: (2020)
Опубліковано: (2020)
Исследование качества обработки поверхности после токарной обработки коррозионностойкой стали 08Х18Н10Г2М2 с крупнокристаллической и ультрамелкозернистой структурой
за авторством: Шамарин Н. Н. Николай Николаевич
Опубліковано: (2019)
за авторством: Шамарин Н. Н. Николай Николаевич
Опубліковано: (2019)
Synthesis, luminescent and dosimetric properties of ultrafine oxide ceramics for high-dose dosimetry of ionizing radiation
Опубліковано: (2024)
Опубліковано: (2024)
Protection of molybdenum containers used at uranium dioxide sintering from grain boundary diffusion of oxygen and nitrogen
за авторством: Makarov F. V.
Опубліковано: (2007)
за авторством: Makarov F. V.
Опубліковано: (2007)
Modification of the structure of surface layers of commercial titanium in the process of treatment by low-energy high-current electron beams
Опубліковано: (2016)
Опубліковано: (2016)
Formation of nanoscale carbon structures in the surface layer of metals under the impact of high intensity ion beam
Опубліковано: (2014)
Опубліковано: (2014)
Improvement of surface layer formation technology for articles produced by layer-by-layer laser sintering
за авторством: Saprykina N. A. Natalia Anatolyevna
Опубліковано: (2013)
за авторством: Saprykina N. A. Natalia Anatolyevna
Опубліковано: (2013)
The effect of layer-by-layer laser sintering on the quality of copper powder sintered surface layer
за авторством: Saprykin A. A. Aleksandr Aleksandrovich
Опубліковано: (2016)
за авторством: Saprykin A. A. Aleksandr Aleksandrovich
Опубліковано: (2016)
The regularities of solid surface erosion and coating deposition using high-power pulsed beams of charged particles
за авторством: Bleykher (Bleicher) G. A. Galina Alekseevna
Опубліковано: (2012)
за авторством: Bleykher (Bleicher) G. A. Galina Alekseevna
Опубліковано: (2012)
Схожі ресурси
-
Numerical Simulation of Thermal Processes and the Effect of Heating of Near-Surface Layers of Titanium on the Diffusion Transfer of Dopants during High-Intensity Pulsed Ion Implantation
за авторством: Ivanova A. I. Anna Ivanovna
Опубліковано: (2023) -
Effect of temperature and pulsed electron beam irradiation on the grain boundary ensemble of the ultrafine-grained molybdenum
Опубліковано: (2016) -
Influence of Equal-Channel Angular Pressing on Grain Structure and Internal Stresses of Technically Pure Nickel
Опубліковано: (2023) -
Features of thermal processes and the influence of pulsed heating of surface layers of titanium on the diffusion transfer of dopants during high-intensity ion implantation
за авторством: Gurulev A. V. Aleksandr Valerjevich
Опубліковано: (2023) -
Lattice Curvature and Mesoscopic Strain-Induced Defects as the Basis of Plastic Deformation in Ultrafine-Grained Metals
за авторством: Panin V. E. Viktor Evgenyevich
Опубліковано: (2018)