Oxidation features of sintered SiC composites deposited on E110 alloyat 1200 °c in air for fuel cladding studies; Journal of Physics: Conference Series; Vol. 1989 : Prospects of Fundamental Sciences Development (PFSD 2021)
| Parent link: | Journal of Physics: Conference Series Vol. 1989 : Prospects of Fundamental Sciences Development (PFSD 2021).— 2021.— [012010, 7 p.] |
|---|---|
| 団体著者: | |
| その他の著者: | , , , |
| 要約: | Title screen Protective coatings are designed to reduce oxidation under extreme reactor temperature conditions. This study involves the application of a SiC coating on an E110 (Zr-1Nb) substrate in an atmosphere of air and argon by selective laser sintering (SLS) technique in which high-temperature oxidation test (HT-Ox) was performed on samples at a temperature of 1200 °C in air for 600 seconds. Calculated mass gained after HT-Ox test gave 34.6 mg/cm2, 31.1 mg/cm2, and 22.8 mg/cm2 for uncoated E110 alloy, SiC-E110 sintered in air and SiC-E110 sintered in an argon atmosphere respectively. X-ray diffraction (XRD) phase studies show the formation of more than 90% ZrO2 on the uncoated E110 alloy after HT-Ox. SiO2 and YAlO3 accounted for more than 50% of the oxides formed on the surfaces of samples coated with SiC after a HT-Ox test. Higher coating hardness's with lower indentation depths were consistently observed in the SiC coated specimen before and after HT-Ox tests proving stability in the coated samples while higher indentation depths and sudden quadrupling in hardness was recorded in E110 alloy before and after HT-Ox respectively. SiC coating on Zr-alloy plays a significant role in reducing oxidation, especially in coatings fabricated in an inert environment. |
| 言語: | 英語 |
| 出版事項: |
2021
|
| 主題: | |
| オンライン･アクセス: | http://earchive.tpu.ru/handle/11683/72805 https://doi.org/10.1088/1742-6596/1989/1/012010 |
| フォーマット: | 電子媒体 図書の章 |
| KOHA link: | https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=665759 |
MARC
| LEADER | 00000naa0a2200000 4500 | ||
|---|---|---|---|
| 001 | 665759 | ||
| 005 | 20250818142515.0 | ||
| 035 | |a (RuTPU)RU\TPU\network\36963 | ||
| 035 | |a RU\TPU\network\36570 | ||
| 090 | |a 665759 | ||
| 100 | |a 20211112d2021 k||y0engy50 ba | ||
| 101 | 0 | |a eng | |
| 102 | |a GB | ||
| 135 | |a drcn ---uucaa | ||
| 181 | 0 | |a i | |
| 182 | 0 | |a b | |
| 200 | 1 | |a Oxidation features of sintered SiC composites deposited on E110 alloyat 1200 °c in air for fuel cladding studies |f B. K. Afornu, A. M. Lider, E. B. Kashkarov, M. S. Syrtanov | |
| 203 | |a Text |c electronic | ||
| 300 | |a Title screen | ||
| 320 | |a [References: 7 tit.] | ||
| 330 | |a Protective coatings are designed to reduce oxidation under extreme reactor temperature conditions. This study involves the application of a SiC coating on an E110 (Zr-1Nb) substrate in an atmosphere of air and argon by selective laser sintering (SLS) technique in which high-temperature oxidation test (HT-Ox) was performed on samples at a temperature of 1200 °C in air for 600 seconds. Calculated mass gained after HT-Ox test gave 34.6 mg/cm2, 31.1 mg/cm2, and 22.8 mg/cm2 for uncoated E110 alloy, SiC-E110 sintered in air and SiC-E110 sintered in an argon atmosphere respectively. X-ray diffraction (XRD) phase studies show the formation of more than 90% ZrO2 on the uncoated E110 alloy after HT-Ox. SiO2 and YAlO3 accounted for more than 50% of the oxides formed on the surfaces of samples coated with SiC after a HT-Ox test. Higher coating hardness's with lower indentation depths were consistently observed in the SiC coated specimen before and after HT-Ox tests proving stability in the coated samples while higher indentation depths and sudden quadrupling in hardness was recorded in E110 alloy before and after HT-Ox respectively. SiC coating on Zr-alloy plays a significant role in reducing oxidation, especially in coatings fabricated in an inert environment. | ||
| 461 | 0 | |0 (RuTPU)RU\TPU\network\3526 |t Journal of Physics: Conference Series | |
| 463 | |t Vol. 1989 : Prospects of Fundamental Sciences Development (PFSD 2021) |o The XVIII International Conference 27-30 April 2021, Tomsk, Russia |v [012010, 7 p.] |d 2021 | ||
| 610 | 1 | |a электронный ресурс | |
| 610 | 1 | |a труды учёных ТПУ | |
| 610 | 1 | |a окисление | |
| 610 | 1 | |a спеченные композиты | |
| 610 | 1 | |a сплавы | |
| 610 | 1 | |a покрытия | |
| 610 | 1 | |a селективное лазерное спекание | |
| 610 | 1 | |a высокотемпературное окисление | |
| 610 | 1 | |a твердость | |
| 701 | 1 | |a Afornu |b B. K. |c Specialist in the field of nuclear technologies |c Engineer of Tomsk Polytechnic University |f 1989- |g Bright Kwame |3 (RuTPU)RU\TPU\pers\46933 | |
| 701 | 1 | |a Lider |b A. M. |c Physicist |c Professor of Tomsk Polytechnic University, Doctor of Technical Sciences |f 1976-2025 |g Andrey Markovich |3 (RuTPU)RU\TPU\pers\30400 |9 14743 | |
| 701 | 1 | |a Kashkarov |b E. B. |c Physicist |c Associate Professor, Researcher of Tomsk Polytechnic University, Candidate of Physical and Mathematical Sciences |f 1991- |g Egor Borisovich |3 (RuTPU)RU\TPU\pers\34949 |9 18267 | |
| 701 | 1 | |a Syrtanov |b M. S. |c physicist |c Associate Professor, Researcher of Tomsk Polytechnic University, Candidate of Technical Sciences |f 1990- |g Maksim Sergeevich |3 (RuTPU)RU\TPU\pers\34764 |9 18114 | |
| 712 | 0 | 2 | |a Национальный исследовательский Томский политехнический университет |b Инженерная школа ядерных технологий |b Отделение экспериментальной физики |3 (RuTPU)RU\TPU\col\23549 |
| 801 | 2 | |a RU |b 63413507 |c 20220830 |g RCR | |
| 856 | 4 | |u http://earchive.tpu.ru/handle/11683/72805 | |
| 856 | 4 | |u https://doi.org/10.1088/1742-6596/1989/1/012010 | |
| 942 | |c CF | ||