The structure - phase state and microhardness of the surface layer of the VT1-0 titanium alloys treated by copper ions; Vacuum; Vol. 149

The structure - phase state and microhardness of the surface layer of the VT1-0 titanium alloys treated by copper ions; Vacuum; Vol. 149

Dades bibliogràfiques
Parent link:	Vacuum Vol. 149.— 2018.— [P. 150-155]
Autor corporatiu:	Национальный исследовательский Томский политехнический университет Инженерная школа новых производственных технологий Отделение материаловедения
Altres autors:	Fedorishcheva M. V. Marina Vladimirovna, Kalashnikov M. P. Mark Petrovich, Nikonenko A. V. Alisa Vladimirovna, Bozhko I. A. Irina Aleksandrovna, Sergeev V. P. Viktor Petrovich
Sumari:	Title screen The phase composition, the structure and the morphology of the surface of the VT1-0 titanium modified by copper ions with an energy of ~0.5 … 2.5 keV and an ion current density of ~2 … 20 mA/cm2 have been investigated by X-ray, SEM and TEM. It has been established that there are the intermetallic phases of the Cu-Ti equilibrium diagram in the surface layer during the treatment of the VT-10 titanium by copper ions. The modified surface layer in the cross section is divided into two layers up to 1 [mu]m and from 1 [mu]m up to 4.5–5.0 [mu]m in thickness depending on the treatment time. Two-level micro and nanoporous nanocrystalline structure is formed in modified layer. It has been found that the phase structure and the morphology of the surface layers of the VT1-0 alloys depend on the treatment time. Режим доступа: по договору с организацией-держателем ресурса
Idioma:	anglès
Publicat:	2018
Matèries:	электронный ресурс труды учёных ТПУ structure-phase state titanium treatment modification microhardness структурно-фазовые состояния титановые сплавы лечение модификации микротвердость медь
Accés en línia:	https://doi.org/10.1016/j.vacuum.2017.12.010
Format:	Electrònic Capítol de llibre
KOHA link:	https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=665682

Ítems similars

Исследование упрочнения поверхности сталей при комбинированном ионном и лазерном воздействии; Известия Томского политехнического университета [Известия ТПУ]; Т. 324, № 2 : Математика и механика. Физика
Publicat: (2014)

The Structure and Properties of Microcrystalline and Submicrocrystalline Titanium Alloy VT1-0 in the Area of the Electron Beam Welding Seam; Russian Physics Journal; Vol. 60, iss. 6
Publicat: (2017)

Modification of surface Ti-fiber by air, nitrogen and argon plasma on air; Energy Fluxes and Radiation Effects (EFRE-2016)
Publicat: (2016)

Increasing the Fatigue Durability of an 3D-Printed Ti-6Al-4V Alloy Electron-Beam Welded Joint by Ultrasonic Electropulsing Shock Treatment; Physics of Metals and Metallography; Vol. 123, iss. 12
Publicat: (2022)

Modification of Ti-6Al-4V alloy element and phase composition by compression plasma flows impact; Surface and Coatings Technology; Vol. 355
Publicat: (2018)

Effect of Ultrasonic Impact Treatment on Microstructure and Fatigue Life of 3D Printed Ti–6Al–4V Titanium Alloy; Physics of Metals and Metallography; Vol. 124, iss. 10
Publicat: (2023)

Hydrogen effect on Ti-6.5Al-3.5Mo-1.5Zr-0.3Si parts produced by electron beam melting; International Journal of Hydrogen Energy; Vol. 44, iss. 55
Publicat: (2019)

Effect of Surface Electropulsing Assisted Ultrasonic Impact Treatment on the Microstructure, Phase Composition, and Microhardness of 3D Printed Ti-6Al-4V Alloy; Physics of Metals and Metallography; Vol. 122, iss. 7
per: Perevalova O. B. Olga Borisovna
Publicat: (2021)

Effect of Surface Modification of a Titanium Alloy by Copper Ions on the Structure and Properties of the Substrate-Coating Composition; Metals; Vol. 10, iss. 12
Publicat: (2020)

Electron Beam Impact on Microstructure and Microhardness of Ti–6Al–4V Titanium Alloy Produced by Wire Electron-Beam Additive Manufacturing Technology and Selective Laser Alloying at Simulation of Electronic-Beam Welding; Physics of Metals and Metallography; Vol. 125, iss. 7
Publicat: (2024)

Electron-Beam Welding - Structural-Phase State and Microhardnes in the Weld Zone in a Submicrocrystalline Titanium Alloy Grade2; Materials Science Forum; Vol. 906 : Materials and Processing Technology
Publicat: (2017)

The Effect of Electropulsing-Assisted Ultrasonic Impact Treatment on the Microstructure, Phase Composition, and Microhardness of Electron-Beam-Welded 3D Printed Ti-6Al-4V Alloy; Physics of Metals and Metallography; Vol. 123, iss. 9
Publicat: (2022)

The Influence of Dimesions and Phase State of Structural Elements on Mechanical Properties of Binary Alloys of the Ti–Nb and Zr–Nb Systems; Russian Physics Journal; Vol. 61, iss. 10
Publicat: (2019)

Transformations of the Microstructure and Phase Compositions of Titanium Alloys during Ultrasonic Impact Treatment. Part I. Commercially Pure Titanium; Metals; Vol. 11, iss. 4
Publicat: (2021)

Thermal Stability of Structure and Properties of the Surface Layer of Instrumental Steel Alloyed with Zirconium and Silicon Atoms under the Action of Compression Plasma Flows; Inorganic Materials: Applied Research; Vol. 9, iss. 5
Publicat: (2018)

The Special Features of the Phase Formation and Distribution in the Titanium Nickelide Surface Layers Treated by Electron Beams; Russian Physics Journal; Vol. 58, iss. 5
Publicat: (2015)

Effect of Structural-Phase State on the Deformation Behavior and Mechanical Properties of Near β Titanium Alloy VT22 in the Temperature Range 293–823 K; Physical Mesomechanics; Vol. 27, iss. 1
Publicat: (2024)

Influence of Ion Treatment Modes on the Physical and Mechanical Properties of Zirconia Ceramics; Inorganic Materials: Applied Research; Vol. 12, iss. 2
per: Gyngazov (Ghyngazov) S. A. Sergey Anatolievich
Publicat: (2021)

Surface modification of ZrO2-3Y2O3 ceramics with continuous Ar+ ion beams; Surface and Coatings Technology; Vol. 388
Publicat: (2020)

Effect of Ultrasonic Impact Treatment on Structural Phase Transformations in Ti-6Al-4V Titanium Alloy; Physical Mesomechanics; Vol. 25, iss. 3
Publicat: (2022)

Titanium Surface Roughness Modification Using Ion Beam and Mechanical Method; Surface Modification of Materials by Ion Beams (SMMIB-2019)
Publicat: (2019)

The use of low-temperature plasma in a combined technology for the formation of wear-resistant boron-containing coatings; Surface and Coatings Technology; Vol. 389
Publicat: (2020)

Transformations of the Microstructure and Phase Compositions of Titanium Alloys during Ultrasonic Impact Treatment Part III: Combination with Electrospark Alloying Applied to Additively Manufactured Ti-6Al-4V Titanium Alloy; Metals; Vol. 13, iss. 5
Publicat: (2023)

Микроструктура ультрамелкозернистого сплава Ti-40мас.%Nb после отжигов; Письма о материалах; Т. 10, № 1
Publicat: (2018)

Thermal Stability of the Structure and Phase Composition of Titanium Treated with Compression Plasma Flows; Journal of Surface Investigation. X-ray, Synchrotron and Neutron Techniques; Vol. 12, iss. 4
Publicat: (2018)

Влияние технологических факторов на микротвердость углей; Известия Томского политехнического университета [Известия ТПУ]. Инжиниринг георесурсов; Т. 330, № 11
per: Салтыкова С. Н. Светлана Николаевна
Publicat: (2019)

Microstructure and Compressive Behavior of Ti-6Al-4V Alloy Built by Electron Beam Free-Form Fabrication; Journal of Materials Engineering and Performance; Vol. 29, iss. 11
Publicat: (2020)

Enhancing Microhardness and Corrosion Resistance of Anodic Oxides Grown on Hypoeutectic Al–Si Alloys Pretreated by Low-Energy High-Current Electron Beams; Journal of Surface Investigation. X-ray, Synchrotron and Neutron Techniques; Vol. 18, iss. 5
Publicat: (2024)

Surface properties modification of magnesium alloys by low energy high current pulsed electron beam; Surface and Coatings Technology; Vol. 420
Publicat: (2021)

Surface modification of Al by high-intensity low-energy Ti-ion implantation: Microstructure, mechanical and tribological properties; Surface and Coatings Technology; Vol. 372
Publicat: (2019)

Neutron irradiation effect on the hardness of nickel titanium alloy modified by krypton ions; Russian Physics Journal; Vol. 63, iss. 7
per: Poltavtseva V. P. Valentina Petrovna
Publicat: (2020)

Microhardness Homogeneity and Microstructure of High-Nitrogen Austenitic Steel Processed by High-Pressure Torsion; AIP Conference Proceedings; Vol. 1909 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2017 (AMHS’17)
Publicat: (2017)

Microstructure and Phase Composition of VT1-0, VT6, and VT14 Titanium Alloys Produced by Wire-Feed Electron-Beam Additive Manufacturing; Journal of Surface Investigation. X-ray, Synchrotron and Neutron Techniques; Vol. 16, iss. 6
Publicat: (2022)

Mesoscopic Structural States at the Nanoscale in Surface Layers of Titanium and Its Alloy Ti-6Al-4V in Ultrasonic and Electron Beam Treatment; Physical Mesomechanics; Vol. 22, iss. 5
Publicat: (2019)

Surface Modification of Electrospun Bioresorbable and Biostable Scaffolds by Pulsed DC Magnetron Sputtering of Titanium for Gingival Tissue Regeneration; Polymers; Vol. 14, iss. 22
Publicat: (2022)

Beam Current Effect on Microstructure and Properties of Electron-Beam-Melted Ti-6Al-4V Alloy; Journal of Materials Engineering and Performance; Vol. 28, iss. 10
Publicat: (2019)

Hydrogen Accumulation and Distribution in Titanium Coatings at Gas-Phase Hydrogenation; Metals; Vol. 10, iss. 7
Publicat: (2020)

Change in the Phase Composition and Lattice Parameters of the Solid Solution Based on a-Ti in the Surface Layers of the Ti–6Al–4V Alloy Subjected to Electron-Beam Treatment; Physics of Metals and Metallography; Vol. 121, iss. 2
per: Perevalova O. B. Olga Borisovna
Publicat: (2020)

Protection from High-Velocity Impact Particles for Quartz Glass by Coatings on the Basis of Al-Si-N; AIP Conference Proceedings; Vol. 1783 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016
Publicat: (2016)

Formation of Structural-Phase States in Alumina Ceramics VK-95 by Sintering in a Constant Magnetic Field; Russian Physics Journal; Vol. 62, iss. 2
Publicat: (2019)