Thermogravimetric analysis of epoxy-based carbon fiber reinforced polymers modified by carbon fillers; IOP Conference Series: Materials Science and Engineering; Vol. 1118 : Mechanical Engineering and Modern Technologies (MEMT 2020)

Thermogravimetric analysis of epoxy-based carbon fiber reinforced polymers modified by carbon fillers; IOP Conference Series: Materials Science and Engineering; Vol. 1118 : Mechanical Engineering and Modern Technologies (MEMT 2020)

Бібліографічні деталі
Parent link:	IOP Conference Series: Materials Science and Engineering Vol. 1118 : Mechanical Engineering and Modern Technologies (MEMT 2020).— 2021.— [012035, 5 p.]
Автор:	Burkov M. V. Mikhail Vladimirovich
Співавтор:	Национальный исследовательский Томский политехнический университет Инженерная школа новых производственных технологий Отделение материаловедения
Інші автори:	Eremin A. V. Alexandr Vyacheslavovich
Резюме:	Title screen The paper presents the results of thermogravimetric/differential scanning calorimetry investigation of hybrid thermoset CFRPs modified by the addition of single-wall carbon nanotubes and milled carbon fibers. Specimens were tested using NETZSCH STA 409 PC/PG with the following parameters: heating from ambient temperature to 873 K with a rate of 15 K/min; Ar flow rate of 50 ml/min. The content of the carbon filler in CFRP was varied allowing to establish some regularities in thermal and physical properties.
Мова:	Англійська
Опубліковано:	2021
Предмети:	электронный ресурс труды учёных ТПУ термогравиметрический анализ полимеры эпоксидные смолы армирование углеродные волокна калориметрия углепластики теплофизические свойства
Онлайн доступ:	http://earchive.tpu.ru/handle/11683/68504 https://doi.org/10.1088/1757-899X/1118/1/012035
Формат:	Електронний ресурс Частина з книги
KOHA link:	https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=665580

Схожі ресурси

Thermooxidative degradation of metal nanopowders/epoxy composites; Энерго-ресурсоэффективность в интересах устойчивого развития
за авторством: Lypchansky D. S.
Опубліковано: (2018)

Flexural properties of copper-filled carbon fiber reinforced polymers; IOP Conference Series: Materials Science and Engineering; Vol. 1118 : Mechanical Engineering and Modern Technologies (MEMT 2020)
за авторством: Eremin A. V. Alexandr Vyacheslavovich
Опубліковано: (2021)

Термоокислительная деградация металлических нанопорошков/эпоксидных композитов; Энерго-ресурсоэффективность в интересах устойчивого развития
за авторством: Липчанский Д. С.
Опубліковано: (2018)

Application of 3D Computed Microtomography for Investigating the Microstructural Defects of Carbon Fiber Reinforced Composite Made by 3D-Printing; Key Engineering Materials; Vol. 712 : Advanced Materials for Technical and Medical Purpose (AMTMP 2016)
Опубліковано: (2016)

Investigation of the Structure and Properties of SWCNT-Modified Epoxy Specimens; IOP Conference Series: Materials Science and Engineering; Vol. 731 : Advanced Materials for Engineering and Medicine (AMEM-2019)
за авторством: Burkov M. V. Mikhail Vladimirovich
Опубліковано: (2020)

Investigation of "smart sensor's" behavior during cyclic test of carbon fiber reinforce polymer; Mechanical Engineering, Automation and Control Systems (MEACS)
Опубліковано: (2014)

Mechanical properties of carbon-fiber-reinforced epoxy composites modified by carbon micro- and nanofillers; Polymer Composites; Vol. 42, iss. 9
за авторством: Burkov M. V. Mikhail Vladimirovich
Опубліковано: (2021)

Enhanced Infrared Image Processing for Impacted Carbon/Glass Fiber-Reinforced Composite Evaluation; Sensors; Vol. 18, iss. 1
Опубліковано: (2018)

Термоокислительная деструкция композиций полидициклопентадиена с бромсодержащими антипиренами; Вестник технологического университета; Т. 25, № 4
Опубліковано: (2022)

Enhanced electrical and mechanical properties of CFRP modified by SWCNT; Иерархические материалы: разработка и приложения для новых технологий и надежных конструкций
за авторством: Burkov M. V. Mikhail Vladimirovich
Опубліковано: (2018)

Enhanced Electrical and Mechanical Properties of CFRP Modified by SWCNT; AIP Conference Proceedings; Vol. 2051 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2018 (AMHS’18)
за авторством: Burkov M. V. Mikhail Vladimirovich
Опубліковано: (2018)

Термоокислительная деструкция композиций полидициклопентадиена с хлорсодержащими антипиренами; Пластические массы; № 11-12
за авторством: Та Куанг Кыонг
Опубліковано: (2020)

Mechanical Strength of Additive Manufactured Carbon Fiber Reinforced Polyetheretherketone; AIP Conference Proceedings; Vol. 1783 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016
Опубліковано: (2016)

Modal Analysis of Additive Manufactured Carbon Fiber Reinforced Polymer Composite Framework: Experiment and Modeling; AIP Conference Proceedings; Vol. 1783 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016
Опубліковано: (2016)

Сверление углепластика; Прогрессивные технологии и экономика в машиностроении
за авторством: Богдашкина Ю. А.
Опубліковано: (2020)

Aluminum Foil Based Fatigue Sensor for Structural Health Monitoring of Carbon Fiber Composites; Procedia Technology; Vol. 19 : 8th International Conference Interdisciplinarity in Engineering, INTER-ENG 2014, 9-10 October 2014, Tirgu Mures, Romania
Опубліковано: (2015)

Авиационные материалы. Вып. 2: Неметаллические композиционные материалы: научно-технический сборник
Опубліковано: (Москва, ОНТИ, 1977)

Контроль термической стойкости эпоксидных нанокомпозитов; Инженерия для освоения космоса
за авторством: Липчанский Д. С.
Опубліковано: (2018)

Alumina-based composites reinforced with single-walled carbon nanotubes; IOP Conference Series: Materials Science and Engineering; Vol. 511 : Perspective Materials of Constructional and Medical Purpose
за авторством: Leonov A. A. Andrey Andreevich
Опубліковано: (2019)

The oxidation kinetic study of mechanically milled ultrafine iron powders by thermogravimetric analysis; Journal of Thermal Analysis and Calorimetry; Vol. 134, iss. 1
Опубліковано: (2018)

Mechanical and Tribotechnical Properties of Polyphenylene Sulfide Composites Reinforced with Carbon Fibers of Various Dimension; AIP Conference Proceedings; Vol. 2051 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2018 (AMHS’18)
Опубліковано: (2018)

Долговечность деталей почвообрабатывающих орудий при наплавочном армировании и создании полимер-композитных абразивостойких поверхностей
за авторством: Михальченков А. М.
Опубліковано: (Брянск, Брянский ГАУ, 2023)

Structure and Properties of SWCNT-Modified CFRP; IOP Conference Series: Materials Science and Engineering; Vol. 731 : Advanced Materials for Engineering and Medicine (AMEM-2019)
за авторством: Burkov M. V. Mikhail Vladimirovich
Опубліковано: (2020)

Термические свойства эпоксидных композитов, армированных нанопорошком железа и порошком борной кислоты; Ресурсоэффективные системы в управлении и контроле: взгляд в будущее
за авторством: Липчанский Д. С.
Опубліковано: (2019)

Dependence the Integrated Energy of the Electromagnetic Response from Excitation Pulse Duration for Epoxy Samples With Sand Filler; IOP Conference Series: Materials Science and Engineering; Vol. 168 : Radiation-Thermal Effects and Processes in Inorganic Materials (RTEP2016)
за авторством: Surzhikov V. P. Vladimir Petrovich
Опубліковано: (2017)

Evaluation of equivalent defect heat generation in carbon epoxy composite under powerful ultrasonic stimulation by using infrared thermography; IOP Conference Series: Materials Science and Engineering; Vol. 81 : Radiation-Thermal Effects and Processes in Inorganic Materials
за авторством: Derusova D. A. Dariya Aleksandrovna
Опубліковано: (2015)

Sol–gel template preparation of alumina nanofillers for reinforcing the epoxy resin; Journal of Sol-Gel Science and Technology; Vol. 80, iss. 2
за авторством: Krivoshapkin P. V. Pavel
Опубліковано: (2016)

Инструментальные методы анализа: термический анализ и низкотемпературная адсорбция азота учебное пособие
за авторством: Баннов А. Г.
Опубліковано: (Новосибирск, НГТУ, 2019)

Physical and Chemical Aspects of Formation of Epoxy Composite Material with Microfilling Agent; Key Engineering Materials; Vol. 712 : Advanced Materials for Technical and Medical Purpose (AMTMP 2016)
Опубліковано: (2016)

Thermal Stability and Flammability of Epoxy Composites Filled with Multi-Walled Carbon Nanotubes, Boric Acid, and Sodium Bicarbonate; Polymers; Vol. 13, iss. 4
Опубліковано: (2021)

Enhancement of mechanical and electrical properties of epoxy-based composites filled with intact or oxidized carbon nanotubes; Composites: Mechanics, Computations, Applications: An International Journal; Vol. 10, iss. 3
Опубліковано: (2019)

Армированные полимерные материалы: сборник переводов; пер. с англ.
Опубліковано: (Москва, Мир, 1968)

Thermal Behavior and Flammability of Epoxy Composites Based on Multi-Walled Carbon Nanotubes and Expanded Graphite: A Comparative Study; Applied Sciences; Vol. 10, iss. 19
Опубліковано: (2020)

Analysis of Oil Shale Applicability for Gasification Using TGA Results; Key Engineering Materials; Vol. 685 : High Technology: Research and Applications 2015 (HTRA 2015)
Опубліковано: (2016)

Influence of modified natural zeolite on the thermal stability of epoxy based composites; IOP Conference Series: Materials Science and Engineering; Vol. 1019 : 14th International Forum on Strategic Technology (IFOST 2019)
за авторством: Murashkina Y. S.
Опубліковано: (2021)

Effect of iron nanopowder on flammability of epoxy composites; IOP Conference Series: Materials Science and Engineering; Vol. 1019 : 14th International Forum on Strategic Technology (IFOST 2019)
за авторством: Nazarenko O. B. Olga Bronislavovna
Опубліковано: (2021)

Thermal properties of epoxy composites filled with boric acid; IOP Conference Series: Materials Science and Engineering; Vol. 81 : Radiation-Thermal Effects and Processes in Inorganic Materials
Опубліковано: (2015)

Influence of unsaturation petroleum resin on the content of epoxy groups; Mendeleev- 2015
за авторством: Ustimenko Yu. P. Yuliya Pavlovna
Опубліковано: (2015)

Comparative study of the effect of flame retardants on the ignition temperature of epoxy composites; Eurasian Physical Technical Journal; Vol. 18, No. 2
Опубліковано: (2021)

Biofiber Reinforcement in Composite Materials
Опубліковано: (Amsterdam, Elsevier, 2015)