Thermogravimetric analysis of epoxy-based carbon fiber reinforced polymers modified by carbon fillers; IOP Conference Series: Materials Science and Engineering; Vol. 1118 : Mechanical Engineering and Modern Technologies (MEMT 2020)
| Parent link: | IOP Conference Series: Materials Science and Engineering Vol. 1118 : Mechanical Engineering and Modern Technologies (MEMT 2020).— 2021.— [012035, 5 p.] |
|---|---|
| Autor principal: | |
| Autor Corporativo: | |
| Outros Autores: | |
| Resumo: | Title screen The paper presents the results of thermogravimetric/differential scanning calorimetry investigation of hybrid thermoset CFRPs modified by the addition of single-wall carbon nanotubes and milled carbon fibers. Specimens were tested using NETZSCH STA 409 PC/PG with the following parameters: heating from ambient temperature to 873 K with a rate of 15 K/min; Ar flow rate of 50 ml/min. The content of the carbon filler in CFRP was varied allowing to establish some regularities in thermal and physical properties. |
| Idioma: | inglês |
| Publicado em: |
2021
|
| Assuntos: | |
| Acesso em linha: | http://earchive.tpu.ru/handle/11683/68504 https://doi.org/10.1088/1757-899X/1118/1/012035 |
| Formato: | Recurso Electrónico Capítulo de Livro |
| KOHA link: | https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=665580 |
MARC
| LEADER | 00000naa2a2200000 4500 | ||
|---|---|---|---|
| 001 | 665580 | ||
| 005 | 20251117145538.0 | ||
| 035 | |a (RuTPU)RU\TPU\network\36779 | ||
| 035 | |a RU\TPU\network\36778 | ||
| 090 | |a 665580 | ||
| 100 | |a 20211019d2021 k||y0rusy50 ba | ||
| 101 | 0 | |a eng | |
| 135 | |a drcn ---uucaa | ||
| 181 | 0 | |a i | |
| 182 | 0 | |a b | |
| 200 | 1 | |a Thermogravimetric analysis of epoxy-based carbon fiber reinforced polymers modified by carbon fillers |f M. V. Burkov, A. V. Eremin | |
| 203 | |a Text |c electronic | ||
| 300 | |a Title screen | ||
| 320 | |a [References: 7 tit.] | ||
| 330 | |a The paper presents the results of thermogravimetric/differential scanning calorimetry investigation of hybrid thermoset CFRPs modified by the addition of single-wall carbon nanotubes and milled carbon fibers. Specimens were tested using NETZSCH STA 409 PC/PG with the following parameters: heating from ambient temperature to 873 K with a rate of 15 K/min; Ar flow rate of 50 ml/min. The content of the carbon filler in CFRP was varied allowing to establish some regularities in thermal and physical properties. | ||
| 461 | 1 | |0 (RuTPU)RU\TPU\network\2008 |t IOP Conference Series: Materials Science and Engineering | |
| 463 | 0 | |0 (RuTPU)RU\TPU\network\36608 |t Vol. 1118 : Mechanical Engineering and Modern Technologies (MEMT 2020) |o International Conference, October 26–30, 2020, Tomsk, Russian Federation |o [proceedings] |f National Research Tomsk Polytechnic University (TPU) |v [012035, 5 p.] |d 2021 | |
| 610 | 1 | |a электронный ресурс | |
| 610 | 1 | |a труды учёных ТПУ | |
| 610 | 1 | |a термогравиметрический анализ | |
| 610 | 1 | |a полимеры | |
| 610 | 1 | |a эпоксидные смолы | |
| 610 | 1 | |a армирование | |
| 610 | 1 | |a углеродные волокна | |
| 610 | 1 | |a калориметрия | |
| 610 | 1 | |a углепластики | |
| 610 | 1 | |a теплофизические свойства | |
| 700 | 1 | |a Burkov |b M. V. |c specialist in the field of material science |c associate professor of Tomsk polytechnical university, Candidate of Technical Sciences |f 1987- |g Mikhail Vladimirovich |3 (RuTPU)RU\TPU\pers\32915 | |
| 701 | 1 | |a Eremin |b A. V. |c specialist in the field of material science |c Engineer of Tomsk Polytechnic University |f 1990- |g Alexandr Vyacheslavovich |3 (RuTPU)RU\TPU\pers\32912 | |
| 712 | 0 | 2 | |a Национальный исследовательский Томский политехнический университет |b Инженерная школа новых производственных технологий |b Отделение материаловедения |3 (RuTPU)RU\TPU\col\23508 |
| 801 | 2 | |a RU |b 63413507 |c 20211026 |g RCR | |
| 856 | 4 | |u http://earchive.tpu.ru/handle/11683/68504 | |
| 856 | 4 | |u https://doi.org/10.1088/1757-899X/1118/1/012035 | |
| 942 | |c CF | ||