Flexural properties of copper-filled carbon fiber reinforced polymers; IOP Conference Series: Materials Science and Engineering; Vol. 1118 : Mechanical Engineering and Modern Technologies (MEMT 2020)
| Parent link: | IOP Conference Series: Materials Science and Engineering Vol. 1118 : Mechanical Engineering and Modern Technologies (MEMT 2020).— 2021.— [012034, 5 p.] |
|---|---|
| Hlavní autor: | |
| Korporativní autor: | |
| Další autoři: | |
| Shrnutí: | Title screen The paper demonstrates the results of flexural tests of carbon fiber reinforced polymers with the addition of copper microfillers with content varying from 2.5 to 10 wt%. It is shown that the implemented dispersive reinforcement leads to the increase of flexural strength on composites by 9%, while the elastic modulus remains the same. The reasons for the advancement in mechanical properties are discussed. |
| Jazyk: | angličtina |
| Vydáno: |
2021
|
| Témata: | |
| On-line přístup: | http://earchive.tpu.ru/handle/11683/68503 https://doi.org/10.1088/1757-899X/1118/1/012034 |
| Médium: | Elektronický zdroj Kapitola |
| KOHA link: | https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=665579 |
MARC
| LEADER | 00000naa2a2200000 4500 | ||
|---|---|---|---|
| 001 | 665579 | ||
| 005 | 20251117145639.0 | ||
| 035 | |a (RuTPU)RU\TPU\network\36778 | ||
| 035 | |a RU\TPU\network\36777 | ||
| 090 | |a 665579 | ||
| 100 | |a 20211019d2021 k||y0rusy50 ba | ||
| 101 | 0 | |a eng | |
| 135 | |a drcn ---uucaa | ||
| 181 | 0 | |a i | |
| 182 | 0 | |a b | |
| 200 | 1 | |a Flexural properties of copper-filled carbon fiber reinforced polymers |f A. V. Eremin, A. V. Burkov | |
| 203 | |a Text |c electronic | ||
| 300 | |a Title screen | ||
| 320 | |a [References: 7 tit.] | ||
| 330 | |a The paper demonstrates the results of flexural tests of carbon fiber reinforced polymers with the addition of copper microfillers with content varying from 2.5 to 10 wt%. It is shown that the implemented dispersive reinforcement leads to the increase of flexural strength on composites by 9%, while the elastic modulus remains the same. The reasons for the advancement in mechanical properties are discussed. | ||
| 461 | 1 | |0 (RuTPU)RU\TPU\network\2008 |t IOP Conference Series: Materials Science and Engineering | |
| 463 | 0 | |0 (RuTPU)RU\TPU\network\36608 |t Vol. 1118 : Mechanical Engineering and Modern Technologies (MEMT 2020) |o International Conference, October 26–30, 2020, Tomsk, Russian Federation |o [proceedings] |f National Research Tomsk Polytechnic University (TPU) |v [012034, 5 p.] |d 2021 | |
| 610 | 1 | |a электронный ресурс | |
| 610 | 1 | |a труды учёных ТПУ | |
| 610 | 1 | |a изгибы | |
| 610 | 1 | |a медь | |
| 610 | 1 | |a полимеры | |
| 610 | 1 | |a армирование | |
| 610 | 1 | |a углеводородные волокна | |
| 610 | 1 | |a микронаполнители | |
| 610 | 1 | |a прочность | |
| 610 | 1 | |a композиты | |
| 610 | 1 | |a механические свойства | |
| 700 | 1 | |a Eremin |b A. V. |c specialist in the field of material science |c Engineer of Tomsk Polytechnic University |f 1990- |g Alexandr Vyacheslavovich |3 (RuTPU)RU\TPU\pers\32912 | |
| 701 | 1 | |a Burkov |b A. V. | |
| 712 | 0 | 2 | |a Национальный исследовательский Томский политехнический университет |b Инженерная школа новых производственных технологий |b Отделение материаловедения |3 (RuTPU)RU\TPU\col\23508 |
| 801 | 2 | |a RU |b 63413507 |c 20211026 |g RCR | |
| 856 | 4 | |u http://earchive.tpu.ru/handle/11683/68503 | |
| 856 | 4 | |u https://doi.org/10.1088/1757-899X/1118/1/012034 | |
| 942 | |c CF | ||