High-voltage pulse bushing with induced voltage distribution between sections; Vacuum; Vol. 194

Dades bibliogràfiques
Parent link:Vacuum
Vol. 194.— 2021.— [110593, 6 p.]
Autor principal: Poloskov A. V. Artem Viktorovich
Autor corporatiu: Национальный исследовательский Томский политехнический университет Инженерная школа новых производственных технологий Научно-производственная лаборатория "Импульсно-пучковых, электроразрядных и плазменных технологий", Национальный исследовательский Томский политехнический университет Исследовательская школа физики высокоэнергетических процессов
Altres autors: Serebrennikov M. A. Maksim Anatolevich, Egorov I. S. Ivan Sergeevich
Sumari:Title screen
The article presents test results of a sectioned vacuum bushing with induced voltage distribution. The bushing was tested with voltage pulses with amplitudes of 24 and 90 kV. The setting of the voltage along the gradient rings was carried out using a galvanic coupling with the turns of a high-voltage pulse transformer. The presented method has allowed distributing the applied voltage between the sections with a deviation of less than 3.5% from the uniform distribution throughout the entire pulse duration (0.25 ?s FWHM). The tests with 90 kV pulses were carried out at a pressure of 10?4 Тоrr. The conical design of the bushing provided a decrease in the average electric field strength in vacuum insulating gaps and a higher rate of the residual atmosphere pumping out, as compared to the traditional cylindrical design of pulse vacuum bushings. The investigated bushing can be used in designs of vacuum electron diodes of pulsed accelerating systems.
Режим доступа: по договору с организацией-держателем ресурса
Idioma:anglès
Publicat: 2021
Matèries:
Accés en línia:https://doi.org/10.1016/j.vacuum.2021.110593
Format: MixedMaterials Electrònic Capítol de llibre
KOHA link:https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=665420

MARC

LEADER 00000naa0a2200000 4500
001 665420
005 20260317071600.0
035 |a (RuTPU)RU\TPU\network\36619 
035 |a RU\TPU\network\36453 
090 |a 665420 
100 |a 20210925d2021 k||y0rusy50 ba 
101 0 |a eng 
135 |a drcn ---uucaa 
181 0 |a i  
182 0 |a b 
200 1 |a High-voltage pulse bushing with induced voltage distribution between sections  |f A. V. Poloskov, M. A. Serebrennikov, I. S. Egorov 
203 |a Text  |c electronic 
300 |a Title screen 
320 |a [References: 29 tit.] 
330 |a The article presents test results of a sectioned vacuum bushing with induced voltage distribution. The bushing was tested with voltage pulses with amplitudes of 24 and 90 kV. The setting of the voltage along the gradient rings was carried out using a galvanic coupling with the turns of a high-voltage pulse transformer. The presented method has allowed distributing the applied voltage between the sections with a deviation of less than 3.5% from the uniform distribution throughout the entire pulse duration (0.25 ?s FWHM). The tests with 90 kV pulses were carried out at a pressure of 10?4 Тоrr. The conical design of the bushing provided a decrease in the average electric field strength in vacuum insulating gaps and a higher rate of the residual atmosphere pumping out, as compared to the traditional cylindrical design of pulse vacuum bushings. The investigated bushing can be used in designs of vacuum electron diodes of pulsed accelerating systems. 
333 |a Режим доступа: по договору с организацией-держателем ресурса 
461 |t Vacuum 
463 |t Vol. 194  |v [110593, 6 p.]  |d 2021 
610 1 |a электронный ресурс 
610 1 |a труды учёных ТПУ 
610 1 |a pulsed transformer 
610 1 |a high voltage bushing 
610 1 |a high voltage generator 
610 1 |a bushing voltage distribution 
610 1 |a импульсные трансформаторы 
610 1 |a высоковольтные вводы 
610 1 |a генераторы высокого напряжения 
700 1 |a Poloskov  |b A. V.  |c physicist  |c Engineer of Tomsk Polytechnic University  |f 1990-  |g Artem Viktorovich  |3 (RuTPU)RU\TPU\pers\32794  |9 16652 
701 1 |a Serebrennikov  |b M. A.  |c Physicist  |c Engineer of Tomsk Polytechnic University  |f 1995-  |g Maksim Anatolevich  |3 (RuTPU)RU\TPU\pers\43059 
701 1 |a Egorov  |b I. S.  |c physicist  |c Researcher of Tomsk Polytechnic University, Candidate of technical sciences  |f 1985-  |g Ivan Sergeevich  |y Tomsk  |3 (RuTPU)RU\TPU\pers\32792  |9 16650 
712 0 2 |a Национальный исследовательский Томский политехнический университет  |b Инженерная школа новых производственных технологий  |b Научно-производственная лаборатория "Импульсно-пучковых, электроразрядных и плазменных технологий"  |3 (RuTPU)RU\TPU\col\23502 
712 0 2 |a Национальный исследовательский Томский политехнический университет  |b Исследовательская школа физики высокоэнергетических процессов  |c (2017- )  |3 (RuTPU)RU\TPU\col\23551 
801 2 |a RU  |b 63413507  |c 20210925  |g RCR 
856 4 |u https://doi.org/10.1016/j.vacuum.2021.110593 
942 |c CF