Transformations of the Microstructure and Phase Compositions of Titanium Alloys during Ultrasonic Impact Treatment. Part I. Commercially Pure Titanium; Metals; Vol. 11, iss. 4

Transformations of the Microstructure and Phase Compositions of Titanium Alloys during Ultrasonic Impact Treatment. Part I. Commercially Pure Titanium; Metals; Vol. 11, iss. 4

Podrobná bibliografie
Parent link:	Metals Vol. 11, iss. 4.— 2021.— [562, 12 p.]
Korporativní autor:	Национальный исследовательский Томский политехнический университет Инженерная школа ядерных технологий Отделение экспериментальной физики
Další autoři:	Panin A. V. Alexey Viktorovich, Dmitriev A. I. Andrey Ivanovich, Nikonov A. Yu. Anton Yurjevich, Kazachenok M. S. Marina Sergeevna, Perevalova O. B. Olga Borisovna, Sklyarova E. A. Elena Aleksandrovna
Shrnutí:	Title screen Experimental and theoretical studies helped to reveal patterns of surface roughening and the microstructure refinement in the surface layer of commercial pure titanium during ultrasonic impact treatment. Applying transmission electron microscopy technique, a gradient microstructure in the surface layer of the ultrasonically treated sample, where the grain size is varied from nano- to micrometers was revealed. It was shown that the surface plastic strains of the titanium sample proceeded according to the plastic ploughing mechanism, which was accompanied by dislocation sliding, twinning, and the transformations of the microstructure and phase composition. The molecular dynamics method was applied to demonstrate the mechanism of the phase transformations associated with the formation of stacking faults, as well as the reversible displacement of atoms from their sites in the hcp lattice, causing a change in coordination numbers. The role of the electronic subsystem in the development of the strain-induced phase transformations during ultrasonic impact treatment was discussed.
Jazyk:	angličtina
Vydáno:	2021
Témata:	электронный ресурс труды учёных ТПУ titanium phase transformation electronic structure microstructure molecular dynamics ultrasonic impact treatment transmission electron microscopy титан фазовое превращение электронная структура микроструктура молекулярная динамика
On-line přístup:	http://earchive.tpu.ru/handle/11683/72787 https://doi.org/10.3390/met11040562
Médium:	Elektronický zdroj Kapitola
KOHA link:	https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=664972

Podobné jednotky

Transformations of the Microstructure and Phase Compositions of Titanium Alloys during Ultrasonic Impact Treatment Part III: Combination with Electrospark Alloying Applied to Additively Manufactured Ti-6Al-4V Titanium Alloy; Metals; Vol. 13, iss. 5
Vydáno: (2023)

Effect of Ultrasonic Impact Treatment on Structural Phase Transformations in Ti-6Al-4V Titanium Alloy; Physical Mesomechanics; Vol. 25, iss. 3
Vydáno: (2022)

Effect of Ultrasonic Impact Treatment on Microstructure and Fatigue Life of 3D Printed Ti–6Al–4V Titanium Alloy; Physics of Metals and Metallography; Vol. 124, iss. 10
Vydáno: (2023)

Effect of Surface Electropulsing Assisted Ultrasonic Impact Treatment on the Microstructure, Phase Composition, and Microhardness of 3D Printed Ti-6Al-4V Alloy; Physics of Metals and Metallography; Vol. 122, iss. 7
Autor: Perevalova O. B. Olga Borisovna
Vydáno: (2021)

The Effect of Electropulsing-Assisted Ultrasonic Impact Treatment on the Microstructure, Phase Composition, and Microhardness of Electron-Beam-Welded 3D Printed Ti-6Al-4V Alloy; Physics of Metals and Metallography; Vol. 123, iss. 9
Vydáno: (2022)

The Microstructural and Phase Evolution of the 3D Printed Ti-6Al-4V Alloy during Mechanical Loading; Physics of Metals and Metallography; Vol. 124, iss. 2
Vydáno: (2023)

Change in the Phase Composition and Lattice Parameters of the Solid Solution Based on a-Ti in the Surface Layers of the Ti–6Al–4V Alloy Subjected to Electron-Beam Treatment; Physics of Metals and Metallography; Vol. 121, iss. 2
Autor: Perevalova O. B. Olga Borisovna
Vydáno: (2020)

Increasing the Fatigue Durability of an 3D-Printed Ti-6Al-4V Alloy Electron-Beam Welded Joint by Ultrasonic Electropulsing Shock Treatment; Physics of Metals and Metallography; Vol. 123, iss. 12
Vydáno: (2022)

In Situ High-Temperature Synchrotron X-ray Studies of Microstructure and Phase Composition of Additively Fabricated Ti–6Al–4V/TiC Metal Matrix Composite; Journal of Surface Investigation: X-ray, Synchrotron and Neutron Techniques; Vol. 19, iss. 4
Vydáno: (2025)

Influence of heat treatment modes on the structure and property of the Ti–4Al–3V titanium alloy manufactured by the wire electron beam additive technology; Russian Physics Journal; Vol. 68, iss. 4
Vydáno: (2025)

Metallurgy of a Ti–Au alloy synthesized by controlled electric resistance fusion; Intermetallics; Vol. 127
Vydáno: (2020)

The High-Temperature In Situ Synchrotron Study of the Structural-Phase Transformations in 3D-Printed Ti–6Al–4V and Ti–5Al–3Mo–V Titanium Alloys; Physics of Metals and Metallography; Vol. 125, iss. 9
Vydáno: (2024)

The Effect of Heat Treatment on the Microstructure and Phase Composition of Wrought and 3D-Printed Ti–5Al–3Mo–1V Titanium Alloy Samples; Journal of Surface Investigation: X-ray, Synchrotron and Neutron Techniques; Vol. 17, Suppl. 1
Vydáno: (2023)

Comparative Investigation of the Influence of Ultrafine-Grained State on Deformation and Temperature Behavior and Microstructure Formed during Quasi-Static Tension of Pure Titanium and Ti-45Nb Alloy by Means of Infrared Thermography; Materials; Vol. 15, iss. 23
Vydáno: (2022)

Mesoscopic Structural States at the Nanoscale in Surface Layers of Titanium and Its Alloy Ti-6Al-4V in Ultrasonic and Electron Beam Treatment; Physical Mesomechanics; Vol. 22, iss. 5
Vydáno: (2019)

In-situ X-ray diffraction study of hydrogen-induced phase transformation in wire-feed electron-beam additive manufactured Ti-6Al-4V alloy; Journal of Alloys and Compounds; Vol. 1045
Vydáno: (2025)

Mechanical Characterization of Composite Coatings Formed by Reactive Detonation Spraying of Titanium; Metals; Vol. 7, iss. 9
Vydáno: (2017)

Orientation of Nickel-Based Alloy after Thermal Treatment; AIP Conference Proceedings; Vol. 1909 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2017 (AMHS’17)
Vydáno: (2017)

Influence of beam current on microstructure of electron beam melted Ti-6Al-4V alloy; Progress in Natural Science: Materials International; Vol. 29, iss. 4
Vydáno: (2019)

Phase transformations in ferrites during radiation-thermal sintering; Eurasian Physical Technical Journal; Vol. 17, № 1 (33)
Vydáno: (2020)

Methane conversion into aromatic hydrocarbons over Ag-Mo/ZSM-5 catalysts; Kinetics and Catalysis; Vol. 52, iss. 3
Vydáno: (2011)

Microstructure and Phase Composition of VT1-0, VT6, and VT14 Titanium Alloys Produced by Wire-Feed Electron-Beam Additive Manufacturing; Journal of Surface Investigation. X-ray, Synchrotron and Neutron Techniques; Vol. 16, iss. 6
Vydáno: (2022)

Effect of Surface Modification of a Titanium Alloy by Copper Ions on the Structure and Properties of the Substrate-Coating Composition; Metals; Vol. 10, iss. 12
Vydáno: (2020)

The Structure and Properties of Microcrystalline and Submicrocrystalline Titanium Alloy VT1-0 in the Area of the Electron Beam Welding Seam; Russian Physics Journal; Vol. 60, iss. 6
Vydáno: (2017)

The Effect of Electron Beam Welding on the Microstructure and Microhardness of 3D-Printed Products from Titanium Alloy Ti-6Al-4V; Physics of Metals and Metallography; Vol. 122, iss. 2
Vydáno: (2021)

Microstructural Transformation and Enhanced Strength of Wire-Feed Electron-Beam Additive Manufactured Ti–6Al–4V Alloy Induced by High-Pressure Torsion; Advanced Engineering Materials; Vol. 26, iss. 4
Vydáno: (2024)

Microstructure and Phase Composition of 3D Printed Titanium Metal Matrix Composites Based on Ti-Al-V-Fe System and Reinforced with TiC Particles; Russian Physics Journal; Vol. 67, iss. 9
Vydáno: (2024)

Modification of the structure of surface layers of commercial titanium in the process of treatment by low-energy high-current electron beams; The Physics of Metals and Metallography; Vol. 117, iss. 6
Vydáno: (2016)

The impact of ultrasonic post-manufacturing on the microstructure of the metallic sheet-based triply periodic minimal surfaces manufactured by electron beam melting; Перспективы развития фундаментальных наук; Т. 1 : Физика
Autor: Khrapov D. Dmitriy
Vydáno: (2023)

Obtaining and studying the luminescent properties of zinc oxide synthesized in a stream of high-energy electrons; Вестник Карагандинского университета. Физика; Bulletin of the Karaganda University. Physics; № 4 (116)
Autor: Oleshko V. I. Vladimir Ivanovich
Vydáno: (2024)

Electron Beam Impact on Microstructure and Microhardness of Ti–6Al–4V Titanium Alloy Produced by Wire Electron-Beam Additive Manufacturing Technology and Selective Laser Alloying at Simulation of Electronic-Beam Welding; Physics of Metals and Metallography; Vol. 125, iss. 7
Vydáno: (2024)

Effect of Irradiation with a Pulsed Electron Beam on the Defect Structure Formation and the Properties of the Surface Layer of Zr–Nb–H System Alloys; Journal of Surface Investigation. X-ray, Synchrotron and Neutron Techniques; Vol. 17
Vydáno: (2023)

Получение углеродных графитоподобных наноматериалов при переработке отходов на основе асфальтенов; Известия Томского политехнического университета [Известия ТПУ]. Инжиниринг георесурсов; Т. 333, № 12
Vydáno: (2022)

Structure and properties of composite coatings prepared by electron beam melting with “titanium carbide - titanium binder”; Surface and Coatings Technology; Vol. 358
Vydáno: (2019)

Features of heterophase structure formation at spark plasma sintering of high-carbon and chromium-nickel steels; Materials Characterization; Vol. 129
Autor: Nikulina A. A.
Vydáno: (2017)

In situ study of phase transformations in electron beam additive manufactured Ti-6Al-4 V titanium alloy by high temperature synchrotron X-ray diffraction and TEM; Journal of Alloys and Compounds; Vol. 917
Autor: Perevalova O. B. Olga Borisovna
Vydáno: (2022)

Effect of Conditions of the Pulsed Plasma-chemical Synthesis on Physicochemical Properties of the CuxOy/TiO2 Nanocomposite; Current Nanomaterials; Vol. 7, iss. 3
Vydáno: (2022)

Structure Changes in the Surface Layers of Ti-6Al-4V Titanium Alloy under Electron Beam Treatment; AIP Conference Proceedings; Vol. 1909 : Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2017 (AMHS’17)
Vydáno: (2017)

Influence of Aerodynamic Abrasive Treatment on the Phase State of the Surface Layer of Ceramics of Partially Stabilized Zirconium Dioxide; Journal of Surface Investigation. X-ray, Synchrotron and Neutron Techniques; Vol. 15, iss. 3
Autor: Gyngazov (Ghyngazov) S. A. Sergey Anatolievich
Vydáno: (2021)

Hydrogen-Induced Phase Transformation and Microstructure Evolution for Ti-6Al-4V Parts Produced by Electron Beam Melting; Metals; Vol. 8, iss. 5
Vydáno: (2018)