Dilatometric analysis of sintering lithium-titanium-zinc ferrite with ZrO2 additive; Journal of Thermal Analysis and Calorimetry; Vol. XXX, iss. X
| Parent link: | Journal of Thermal Analysis and Calorimetry Vol. XXX, iss. X.— 2021.— [6 p.] |
|---|---|
| Autor corporatiu: | , |
| Altres autors: | , , , |
| Sumari: | Title screen Sintering of multicomponent lithium ferrite of the chemical composition Li0.65Fe1.6Ti0.5Zn0.2Mn0.05O4 with the addition of ZrO2 was studied using dilatometric and kinetic analyses. The LiTiZn ferrite was synthesized by solid state reaction from Fe2O3, Li2CO3, TiO2, ZnO, and MnO2 high-purity powders, and then doped with zirconia nanopowder (0.5, 1 and 2 mass%). The ZrO2 was prepared by sol–gel technique. It was found that small concentration of ZrO2 additives (up to 1 mass%) increase the bulk density of ferrite. An increase in the concentration of ZrO2 additive to 2 mass% causes deterioration of ferrite compaction. Shrinkage curves were used to perform the kinetic analysis based on mathematical modeling to find the parameters of ferrite sintering. The kinetic analysis showed that the diffusion models are suitable for mathematical determination of the kinetic patterns of ferrite sintering. The estimated values of the kinetic parameters can be used to improve the technological process of sintering of multicomponent ferrite materials doped with zirconia. Режим доступа: по договору с организацией-держателем ресурса |
| Idioma: | anglès |
| Publicat: |
2021
|
| Matèries: | |
| Accés en línia: | https://doi.org/10.1007/s10973-020-10416-4 |
| Format: | Electrònic Capítol de llibre |
| KOHA link: | https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=664920 |
MARC
| LEADER | 00000naa0a2200000 4500 | ||
|---|---|---|---|
| 001 | 664920 | ||
| 005 | 20250124133516.0 | ||
| 035 | |a (RuTPU)RU\TPU\network\36105 | ||
| 035 | |a RU\TPU\network\34056 | ||
| 090 | |a 664920 | ||
| 100 | |a 20210528d2021 k||y0rusy50 ba | ||
| 101 | 0 | |a eng | |
| 135 | |a drcn ---uucaa | ||
| 181 | 0 | |a i | |
| 182 | 0 | |a b | |
| 200 | 1 | |a Dilatometric analysis of sintering lithium-titanium-zinc ferrite with ZrO2 additive |f S. A. Nikolaeva, E. N. Lysenko, E. V. Nikolaev, A. P. Surzhikov | |
| 203 | |a Text |c electronic | ||
| 300 | |a Title screen | ||
| 320 | |a [References: 44 tit.] | ||
| 330 | |a Sintering of multicomponent lithium ferrite of the chemical composition Li0.65Fe1.6Ti0.5Zn0.2Mn0.05O4 with the addition of ZrO2 was studied using dilatometric and kinetic analyses. The LiTiZn ferrite was synthesized by solid state reaction from Fe2O3, Li2CO3, TiO2, ZnO, and MnO2 high-purity powders, and then doped with zirconia nanopowder (0.5, 1 and 2 mass%). The ZrO2 was prepared by sol–gel technique. It was found that small concentration of ZrO2 additives (up to 1 mass%) increase the bulk density of ferrite. An increase in the concentration of ZrO2 additive to 2 mass% causes deterioration of ferrite compaction. Shrinkage curves were used to perform the kinetic analysis based on mathematical modeling to find the parameters of ferrite sintering. The kinetic analysis showed that the diffusion models are suitable for mathematical determination of the kinetic patterns of ferrite sintering. The estimated values of the kinetic parameters can be used to improve the technological process of sintering of multicomponent ferrite materials doped with zirconia. | ||
| 333 | |a Режим доступа: по договору с организацией-держателем ресурса | ||
| 461 | |t Journal of Thermal Analysis and Calorimetry | ||
| 463 | |t Vol. XXX, iss. X |v [6 p.] |d 2021 | ||
| 610 | 1 | |a электронный ресурс | |
| 610 | 1 | |a труды учёных ТПУ | |
| 610 | 1 | |a lithium-titanium-zinc ferrite | |
| 610 | 1 | |a ZrO2 additive | |
| 610 | 1 | |a sintering | |
| 610 | 1 | |a dilatometry | |
| 610 | 1 | |a kinetic analysis | |
| 610 | 1 | |a литий-титановые ферриты | |
| 610 | 1 | |a спекание | |
| 610 | 1 | |a дилатометрия | |
| 610 | 1 | |a кинетический анализ | |
| 701 | 1 | |a Nikolaeva |b S. A. |c specialist in the field of electrical engineering |c Laboratory assistant researcher of Tomsk Polytechnic University |f 1990- |g Svetlana Andreevna |3 (RuTPU)RU\TPU\pers\37341 |9 20260 | |
| 701 | 1 | |a Lysenko |b E. N. |c Specialist in the field of electrical engineering |c Professor of Tomsk Polytechnic University, Doctor of technical sciences |f 1972- |g Elena Nikolaevna |3 (RuTPU)RU\TPU\pers\32050 |9 16097 | |
| 701 | 1 | |a Nikolaev |b E. V. |c specialist in the field of electrical engineering |c engineer of Tomsk Polytechnic University |f 1989- |g Evgeny Vladimirovich |3 (RuTPU)RU\TPU\pers\34529 |9 17910 | |
| 701 | 1 | |a Surzhikov |b A. P. |c physicist |c Professor of Tomsk Polytechnic University, doctor of physical and mathematical sciences (DSc) |f 1951- |g Anatoly Petrovich |3 (RuTPU)RU\TPU\pers\30237 |9 14617 | |
| 712 | 0 | 2 | |a Национальный исследовательский Томский политехнический университет |b Инженерная школа неразрушающего контроля и безопасности |b Отделение контроля и диагностики |3 (RuTPU)RU\TPU\col\23584 |
| 712 | 0 | 2 | |a Национальный исследовательский Томский политехнический университет |b Институт неразрушающего контроля |b Проблемная научно-исследовательская лаборатория электроники, диэлектриков и полупроводников |3 (RuTPU)RU\TPU\col\19033 |
| 801 | 2 | |a RU |b 63413507 |c 20210528 |g RCR | |
| 856 | 4 | |u https://doi.org/10.1007/s10973-020-10416-4 | |
| 942 | |c CF | ||