Influence of 3D-printed collimator thickness on near-the-edge scattering of high-energy electrons; Journal of Instrumentation; Vol. 15 : Radiation from Relativistic Electrons in Periodic Structures (RREPS-19)
| Parent link: | Journal of Instrumentation Vol. 15 : Radiation from Relativistic Electrons in Periodic Structures (RREPS-19).— 2020.— [C04023, 8 p.] |
|---|---|
| Autor corporatiu: | , |
| Altres autors: | , , , , , |
| Sumari: | Title screen In this research, we study how the thickness of a 3D-printed collimator affects high-energy electron scattering. As part of this work, an ABS plastic absorber was produced by fused deposition modeling. Dose distributions at the boundary of the plastic absorber were experimentally observed for 6, 12, and 20 MeV electron beams. For plastic absorber thicknesses of up to 3 cm, dose "hot spots" are observed at the boundary between the primary beam and the beam that has passed through the absorber for 12 and 20 MeV electrons. However, no additional scattering is observed at the absorber edges for the thicknesses of plastic collimators above the minimum thickness providing the total absorption of electron beams (=4 cm for 6 MeV electrons, =8 cm for 12 MeV electrons, and =10 cm for 20 MeV electrons). The experiments show that 3D printing is a useful tool for modulating high energy electron beams, for example, in the field of medical physics. |
| Idioma: | anglès |
| Publicat: |
2020
|
| Matèries: | |
| Accés en línia: | https://doi.org/10.1088/1748-0221/15/04/C04023 |
| Format: | MixedMaterials Electrònic Capítol de llibre |
| KOHA link: | https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=664917 |
MARC
| LEADER | 00000naa0a2200000 4500 | ||
|---|---|---|---|
| 001 | 664917 | ||
| 005 | 20250815101933.0 | ||
| 035 | |a (RuTPU)RU\TPU\network\36102 | ||
| 090 | |a 664917 | ||
| 100 | |a 20210528d2020 k y0engy50 ba | ||
| 101 | 0 | |a eng | |
| 102 | |a GB | ||
| 135 | |a vrcn ---uucaa | ||
| 181 | 0 | |a i | |
| 182 | 0 | |a b | |
| 200 | 1 | |a Influence of 3D-printed collimator thickness on near-the-edge scattering of high-energy electrons |f S. G. Stuchebrov, A. A. Bulavskaya, Yu. M. Cherepennikov [et al.] | |
| 203 | |a Text |c electronic | ||
| 300 | |a Title screen | ||
| 320 | |a [References: 26 tit.] | ||
| 330 | |a In this research, we study how the thickness of a 3D-printed collimator affects high-energy electron scattering. As part of this work, an ABS plastic absorber was produced by fused deposition modeling. Dose distributions at the boundary of the plastic absorber were experimentally observed for 6, 12, and 20 MeV electron beams. For plastic absorber thicknesses of up to 3 cm, dose "hot spots" are observed at the boundary between the primary beam and the beam that has passed through the absorber for 12 and 20 MeV electrons. However, no additional scattering is observed at the absorber edges for the thicknesses of plastic collimators above the minimum thickness providing the total absorption of electron beams (=4 cm for 6 MeV electrons, =8 cm for 12 MeV electrons, and =10 cm for 20 MeV electrons). The experiments show that 3D printing is a useful tool for modulating high energy electron beams, for example, in the field of medical physics. | ||
| 461 | 1 | |0 (RuTPU)RU\TPU\network\25113 |t Journal of Instrumentation | |
| 463 | |t Vol. 15 : Radiation from Relativistic Electrons in Periodic Structures (RREPS-19) |o XIII International Symposium, 16-20 September, 2019, Belgorod, Russian Federation |o [proceedings] |v [C04023, 8 p.] |d 2020 | ||
| 610 | 1 | |a электронный ресурс | |
| 610 | 1 | |a труды учёных ТПУ | |
| 610 | 1 | |a accelerator applications | |
| 610 | 1 | |a beam dynamics | |
| 610 | 1 | |a приложения | |
| 610 | 1 | |a лучевая терапия | |
| 701 | 1 | |a Stuchebrov |b S. G. |c physicist |c Associate Professor of Tomsk Polytechnic University, Candidate of Physical and Mathematical Sciences |f 1981- |g Sergey Gennadevich |3 (RuTPU)RU\TPU\pers\31559 |9 15719 | |
| 701 | 1 | |a Bulavskaya |b A. A. |c Specialist in the field of nuclear technologies |c Senior Lecturer of Tomsk Polytechnic University, Candidate of Physical and Mathematical Sciences |f 1993- |g Angelina Aleksandrovna |3 (RuTPU)RU\TPU\pers\45898 |9 22019 | |
| 701 | 1 | |a Cherepennikov |b Yu. M. |c physicist |c Associate Professor of Tomsk Polytechnic University, Candidate of Sciences |f 1989- |g Yuriy Mihaylovich |3 (RuTPU)RU\TPU\pers\31561 |9 15721 | |
| 701 | 1 | |a Gargioni |b E. |g Elisabetta | |
| 701 | 1 | |a Grigorieva (Grigorjeva) |b A. A. |c nuclear technology specialist |c engineer of Tomsk Polytechnic University |f 1995- |g Anna Anatoljevna |3 (RuTPU)RU\TPU\pers\46746 | |
| 701 | 1 | |a Miloichikova |b I. A. |c physicist |c Associate Professor of Tomsk Polytechnic University, Candidate of Physical and Mathematical Sciences |f 1988- |g Irina Alekseevna |3 (RuTPU)RU\TPU\pers\35525 |9 18707 | |
| 712 | 0 | 2 | |a Национальный исследовательский Томский политехнический университет |b Исследовательская школа физики высокоэнергетических процессов |c (2017- ) |3 (RuTPU)RU\TPU\col\23551 |
| 712 | 0 | 2 | |a Национальный исследовательский Томский политехнический университет |b Инженерная школа ядерных технологий |b Отделение ядерно-топливного цикла |3 (RuTPU)RU\TPU\col\23554 |
| 801 | 2 | |a RU |b 63413507 |c 20210528 |g RCR | |
| 850 | |a 63413507 | ||
| 856 | 4 | |u https://doi.org/10.1088/1748-0221/15/04/C04023 | |
| 942 | |c CF | ||