Synthesis and Properties of Silicon-Carbide-Modified Porous Glass Composite; Glass and Ceramics; Vol. 77, iss. 3-4

Synthesis and Properties of Silicon-Carbide-Modified Porous Glass Composite; Glass and Ceramics; Vol. 77, iss. 3-4

Detalles Bibliográficos
Parent link:	Glass and Ceramics Vol. 77, iss. 3-4.— 2020.— [P. 127-134]
Autor principal:	Semenova V. I. Valeriya Igorevna
Autor Corporativo:	Национальный исследовательский Томский политехнический университет Инженерная школа новых производственных технологий Научно-образовательный центр Н. М. Кижнера
Otros Autores:	Kutugin V. A. Viktor Aleksandrovich, Kazmina O. V. Olga Viktorovna
Sumario:	Title screen The synthesis and properties of a porous glass composite obtained, based on cullet powder using aluminum powder and liquid glass, at temperatures not exceeding 100°C are discussed. It is shown that silicon carbide or a mixture of silicon carbide with gallium arsenide, which is a product of grinding in the semiconductor industry, can be used as a composition modifier. It is shown that porous glass composite with density not exceeding 600 kg/m3 and strength in compression not less than 1.7 MPa can be obtained by introducing 32% waste into the composition. The introduction of modifiers promotes better foaming and positively impacts the structural quality factor of the material. The results of these studies expand the range of application and the raw material base for the production of porous glass composites. Режим доступа: по договору с организацией-держателем ресурса
Lenguaje:	inglés
Publicado:	2020
Materias:	электронный ресурс труды учёных ТПУ porous glass composite silicon carbide silicon carbide mixture with gallium arsenide foaming ratio cold foaming strength-density factor композиты пористые стекла карбид кремния пенообразование
Acceso en línea:	https://doi.org/10.1007/s10717-020-00255-y
Formato:	Electrónico Capítulo de libro
KOHA link:	https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=664759

Ejemplares similares

Physical, Mechanical, and Electrophysical Properties of Porous Glass Composite with Silicon Carbide Additives; Glass and Ceramics; Vol. 78, iss. 3-4
Publicado: (2021)

Glass waste derived silicon carbide synthesis via direct current atmospheric arc plasma; Waste Management; Vol. 144
Publicado: (2022)

Porous articles with rigid structure based on natural amorphous silica; Glass and Ceramics; Vol. 75, iss. 1-2
Publicado: (2018)

Porous SiC ceramic obtained by spark plasma sintering of preceramic paper: Microstructure, mechanical properties and gas permeability; Ceramics International; Vol. 50, iss. 8
Publicado: (2024)

Temperature regimes for obtaining granular material for foamed crystal glass materials as a function of the batch composition; Glass and Ceramics; Vol. 66, N 5-6
Publicado: (2009)

Advanced Arc Plasma Synthesis of Biomorphic Silicon Carbide Using Charcoal and Silicon Dioxide in Air; Waste and Biomass Valorization; Vol. 13, iss. 1
Publicado: (2021)

On the Possibility of Synthesis of Silicon Carbide Using an Indirect-Action Plasma Gun; Journal of Engineering Physics and Thermophysics; Vol. 97, iss. 2
Publicado: (2024)

Tribological properties of silicon carbide ceramic surfaces modified by polishing, grinding and laser radiation; Discover Applied Sciences; Vol. 7, iss. 1
Publicado: (2025)

Magnetite’s Influence on the Radio-Absorbing Properties of a Porous Glass Composite at High-Frequencies; Glass and Ceramics; Vol. 79, iss. 5-6
por: Skirdin K. V. Kirill Vyacheslavovich
Publicado: (2022)

Robocasting of reaction bonded silicon carbide structures; Journal of the European Ceramic Society; Vol. 39, iss. 15
Publicado: (2019)

Agricultural waste derived silicon carbide composite nanopowders as efficient coelectrocatalysts for water splitting; Journal of Cleaner Production; Vol. 442
Publicado: (2024)

Анализ вспенивающей активности различных видов порообразователей при синтезе пеностекла; Известия Томского политехнического университета [Известия ТПУ]. Инжиниринг георесурсов; Т. 331, № 12
por: Гольцман Б. М. Борис Михайлович
Publicado: (2020)

Microstructure and Phase Composition of Porous SiC-Ceramic Obtained by Spark Plasma Sintering of Preceramic Paper; Journal of Surface Investigation. X-ray, Synchrotron and Neutron Techniques; Vol. 17
por: Sedanova E. P. Elizaveta Pavlovna
Publicado: (2023)

Synthesis of silicon carbide using an AC atmospheric-pressure arc reactor; Journal of Alloys and Compounds; Vol. 1003
Publicado: (2024)

Sintered silicon carbide composites deposited on zirconium alloy substrates in air and Ar atmosphere – Part II: Evaluation on micro-indentation properties; Materials Letters; Vol. 308, Pt. B
Publicado: (2022)

Effect of a Coating Deposited on Foam Glass on the Ability to Absorb High-Frequency Electromagnetic Radiation; Glass and Ceramics; Vol. 75, iss. 5-6
Publicado: (2018)

Electroarc Synthesis and Cleaning from Carbon Impurities of Cubic Silicon Carbide in the Air Atmosphere; Journal of Superhard Materials; Vol. 40, iss. 3
Publicado: (2018)

Obtaining Silicon-Carbide-Based Ceramics from Ash and Slag Wastes; Technical Physics Letters; Vol. 46, iss. 7
por: Pak A. Ya. Aleksandr Yakovlevich
Publicado: (2020)

Sintered Silicon Carbide composites deposited on zirconium alloy substrates in air and Ar atmosphere – Part I: Evaluation of scratch adhesion and tribology properties; Materials Letters; Vol. 306
Publicado: (2022)

Сравнительный анализ особенностей формирования состава плазмы при магнетронном распылении карбида кремния с использованием охлаждаемой и горячей мишеней; Перспективы развития фундаментальных наук; Т. 1 : Физика
por: Фишер М. Э.
Publicado: (2025)

Silicon carbide obtaining with DC arc-discharge plasma: synthesis, product characterization and purification; Materials Chemistry and Physics; Vol. 271
Publicado: (2021)

Optimization of plasma dynamic synthesis of ultradispersed silicon carbide and obtaining SPS ceramics on its basis; International Journal of Refractory Metals and Hard Materials; Vol. 79
Publicado: (2019)

Dependence of the Product's Phase Composition on the Ratio of Precursors in Plasmadynamic Synthesis of Silicon Carbide; Key Engineering Materials; Vol. 769 : High Technology: Research and Applications (HTRA 2017)
por: Sivkov A. A. Aleksandr Anatolyevich
Publicado: (2018)

Physical and biological properties of silicon nanopowders obtained by the chemicothermal method; Nanotechnologies in Russia; Vol. 8, iss. 1-2
Publicado: (2013)

Foam glass material to absorb electromagnetic waves; Journal of Economics and Social Sciences; № 12
por: Kaymonov M. Maxim
Publicado: (2018)

Efficient Nonorthogonal Multiple Access: Cooperative Use of Distributed Space-Time Block Coding; IEEE Vehicular Technology Magazine; Vol. 13, iss. 4
Publicado: (2018)

Structural Mechanics Calculations of SiC/Mo-Re Composites with Improved High Temperature Creep Properties; Materials; Vol. 18, iss. 15
Publicado: (2025)

Properties of Foamglass with Fullerene-Like Mesostructure; Russian Physics Journal; Vol. 63, iss. 4
por: Semukhin B. S. Boris Semenovich
Publicado: (2020)

Microstructural Analysis of Novel Preceramic Paper-Derived SiCf/SiC Composites; Materials; Vol. 14, iss. 22
Publicado: (2021)

Use of Byproducts of Acidic Processing of Aluminium – Bearing Raw Materials in Production of Heat Insulating Materials; Procedia Chemistry; Vol. 10 : Chemistry and Chemical Engineering in XXI century
por: Duschkina M. A. Marija Alexejewna
Publicado: (2014)

The influence of ion irradiation on the properties of ceramic silicon carbide; Energy Fluxes and Radiation Effects (EFRE-2016)
Publicado: (2016)

Obtaining a Material Based on Я-SiC and Carbon Fibers Using an Electric Arc Technique; Inorganic Materials: Applied Research; Vol. 10, iss. 4
Publicado: (2019)

Influence of Silica Fume on the Production Process and Properties of Porous Glass Composite; Известия вузов. Химия и химическая технология; Т. 66, вып. 1
por: Skirdin K. V. Kirill Vyacheslavovich
Publicado: (2023)

Пенное пожаротушение: особенности в современных условиях; Инновационные технологии в машиностроении
por: Деменкова Л. Г. Лариса Геннадьевна
Publicado: (2019)

Литология пород туртасской свиты и возможности их использования в качестве сырья для производства пеностеклокерамики на примере Успенской площади (Тюменская область); Известия Томского политехнического университета [Известия ТПУ]. Инжиниринг георесурсов; Т. 326, № 7
por: Смирнов П. В. Павел Витальевич
Publicado: (2015)

Электроперенос пленок арсенида галлия, синтезированных ионной абляцией; Известия вузов. Физика; Т. 57, № 9/3
Publicado: (2014)

Ash Waste Utilization via Direct Current Arc Plasma with Production of SiC and AlN; Waste and Biomass Valorization; Vol. 12, iss. 10
Publicado: (2021)

Cubic SiC nanowire synthesis by DC arc discharge under ambient air conditions; Surface and Coatings Technology; Vol. 387
Publicado: (2020)

Fabrication of Ti3SiC2-based pastes for screen printing on paper-derived Al2O3 substrates; Ceramics International; Vol. 44, iss. 7
Publicado: (2018)

Вещественный состав и физические свойства алевропелитовых пород ишимской свиты юга Тюменской области. Возможные направления их практического использования; Известия Томского политехнического университета [Известия ТПУ]. Инжиниринг георесурсов; Т. 327, № 1
por: Смирнов П. В. Павел Витальевич
Publicado: (2016)