Energy recycling of pyrolysis water as a part of coal-water fuel; International Journal of Energy Research; Vol. 45, iss. 10

Bibliographische Detailangaben
Parent link:International Journal of Energy Research
Vol. 45, iss. 10.— 2021.— P. 14895-14909
Weitere Verfasser: Larionov K. B. Kirill Borisovich, Gvozdyakov D. V. Dmitry Vasilievich, Zenkov A. V. Andrey Viktorovich, Kaltaev A. Albert, Ulko A. A. Aleksandr Anatoljevich, Gubin V. E. Vladimir Evgenievich
Zusammenfassung:Title screen
Under research, there is a combustion process of multicomponent coal‐water fuel (CWF) that was conducted with mixing ratio of coal, pyrolysis, and technical water. The pyrolysis water was extracted through pyrolysis oil settling, where the oil was obtained from pyrolysis of wood waste. Ignition and combustion of CWF samples were carried out in a combustion chamber at heating medium temperatures (Tg = 600‐1000°C, with an interim step of 50°C). Gas‐phase combustion products were analyzed with a flow‐line gas analyzer. Technical water in CWF composition was replaced with pyrolysis one that was acted to raise the reactive capacity. It resulted in reducing the ignition delay time τi (by an average of 25%) and the minimum ignition temperature (from 440°С to 393°С, reliance on a CWF composition). In addition, increase in flame combustion time was recorded by an average of 20%, as well as dependence on a heating medium temperature and a CWF composition. In the case when a CWF liquid‐phase component was completely replaced with the pyrolysis water, the significant increase in heat value by 2.14 MJ/kg was observed. According to the data of the flow‐line gas analyzer, we concluded that the CWF combustion based on the pyrolysis water was accompanied by less NOx emission (by an average of 22%) but more CO and CO2 amount (by an average of 1.4 and 1.2, respectively). It was found according to the results of the energy balance assessment that application of pyrolysis water in CWF composition leads to a decrease in fuel consumption for heat production by 16.7%.
Sprache:Englisch
Veröffentlicht: 2021
Schlagworte:
Online-Zugang:https://doi.org/10.1002/er.6765
Format: Elektronisch Buchkapitel
KOHA link:https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=664672

MARC

LEADER 00000naa0a2200000 4500
001 664672
005 20260217132247.0
035 |a (RuTPU)RU\TPU\network\35856 
035 |a RU\TPU\network\34307 
090 |a 664672 
100 |a 20210513d2021 k||y0rusy50 ba 
101 0 |a eng 
102 |a US 
135 |a drnn ---uucaa 
181 0 |a i  
182 0 |a b 
200 1 |a Energy recycling of pyrolysis water as a part of coal-water fuel  |f K. B. Larionov, D. V. Gvozdyakov, A. V. Zenkov [et al.] 
203 |a Text  |c electronic 
300 |a Title screen 
320 |a [References: 48 tit.] 
330 |a Under research, there is a combustion process of multicomponent coal‐water fuel (CWF) that was conducted with mixing ratio of coal, pyrolysis, and technical water. The pyrolysis water was extracted through pyrolysis oil settling, where the oil was obtained from pyrolysis of wood waste. Ignition and combustion of CWF samples were carried out in a combustion chamber at heating medium temperatures (Tg = 600‐1000°C, with an interim step of 50°C). Gas‐phase combustion products were analyzed with a flow‐line gas analyzer. Technical water in CWF composition was replaced with pyrolysis one that was acted to raise the reactive capacity. It resulted in reducing the ignition delay time τi (by an average of 25%) and the minimum ignition temperature (from 440°С to 393°С, reliance on a CWF composition). In addition, increase in flame combustion time was recorded by an average of 20%, as well as dependence on a heating medium temperature and a CWF composition. In the case when a CWF liquid‐phase component was completely replaced with the pyrolysis water, the significant increase in heat value by 2.14 MJ/kg was observed. According to the data of the flow‐line gas analyzer, we concluded that the CWF combustion based on the pyrolysis water was accompanied by less NOx emission (by an average of 22%) but more CO and CO2 amount (by an average of 1.4 and 1.2, respectively). It was found according to the results of the energy balance assessment that application of pyrolysis water in CWF composition leads to a decrease in fuel consumption for heat production by 16.7%. 
461 |t International Journal of Energy Research 
463 |t Vol. 45, iss. 10  |v P. 14895-14909  |d 2021 
610 1 |a электронный ресурс 
610 1 |a труды учёных ТПУ 
610 1 |a coal 
610 1 |a coal-water fuel 
610 1 |a combustion 
610 1 |a gas-phase combustion products 
610 1 |a ignition 
610 1 |a pyrolysis water 
610 1 |a каменный уголь 
610 1 |a водоугольное топливо 
610 1 |a горение 
610 1 |a пиролизный конденсат 
701 1 |a Larionov  |b K. B.  |c specialist in the field of power engineering  |c Associate Professor of Tomsk Polytechnic University, Candidate of Technical Sciences  |f 1990-  |g Kirill Borisovich  |3 (RuTPU)RU\TPU\pers\35705  |9 18865 
701 1 |a Gvozdyakov  |b D. V.  |c specialist in the field of power engineering  |c Associate Professor of Tomsk Polytechnic University, Candidate of technical sciences  |f 1985-  |g Dmitry Vasilievich  |3 (RuTPU)RU\TPU\pers\35121  |9 18396 
701 1 |a Zenkov  |b A. V.  |c Associate Professor of Tomsk Polytechnic University, Candidate of Technical Sciences  |c specialist in the field of power engineering  |f 1992-  |g Andrey Viktorovich  |3 (RuTPU)RU\TPU\pers\37816  |9 20530 
701 1 |a Kaltaev  |b A.  |c Physicist  |c Assistant of the Department of Tomsk Polytechnic University  |f 1995-  |g Albert  |3 (RuTPU)RU\TPU\pers\47142  |9 22735 
701 1 |a Ulko  |b A. A.  |g Aleksandr Anatoljevich 
701 1 |a Gubin  |b V. E.  |c specialist in the field of power engineering  |c Associate Professor of Tomsk Polytechnic University, Candidate of technical sciences  |f 1976-  |g Vladimir Evgenievich  |3 (RuTPU)RU\TPU\pers\35120  |9 18395 
801 2 |a RU  |b 63413507  |c 20220329  |g RCR 
856 4 0 |u https://doi.org/10.1002/er.6765  |z https://doi.org/10.1002/er.6765 
942 |c CF