SiC- and Ti₃SiC₂-Based Ceramics Synthesis by Spark Plasma Sintering of Preceramic Paper; Journal of Physics: Conference Series; Vol. 1443 : Issues of Physics and Technology in Science, Power Industry and Medicine
| Источник: | Journal of Physics: Conference Series Vol. 1443 : Issues of Physics and Technology in Science, Power Industry and Medicine.— 2020.— [012007, 7 p.] |
|---|---|
| Корпоративные авторы: | , , |
| Другие авторы: | , , , , , |
| Примечания: | Title screen This paper is devoted to proposing a new approach to the synthesis of SiC- and Ti₃SiC₂-based ceramics by using of preceramic paper as a feedstock. A preceramic paper with SiC and Ti₃SiC₂ powder fillers were sintered by spark plasma sintering (SPS) method for holding time 10 minutes under pressure 20-100 MPa. The temperature for the sintering of SiC- and Ti₃SiC₂-filled paper was 2073-2373 K and 1373-1473 K respectively. The influence of sintering parameters on the materials microstructure was analyzed by scanning electron microscopy. It was revealed that with an increase in pressure from 20 to 100 MPa, the microstructure of the materials becomes denser. It agrees with the results of measuring the density of the sintering materials by the hydrostatic weighting. The determination of Young`s modulus by the acoustic method demonstrates that with the increase of the applied pressure during SPS, Young's modulus of the synthesized SiC- and Ti₃SiC₂-ceramics increase. |
| Язык: | английский |
| Опубликовано: |
2020
|
| Предметы: | |
| Online-ссылка: | http://earchive.tpu.ru/handle/11683/65045 https://doi.org/10.1088/1742-6596/1443/1/012007 |
| Формат: | Электронный ресурс Статья |
| Запись в KOHA: | https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=664460 |
MARC
| LEADER | 00000naa0a2200000 4500 | ||
|---|---|---|---|
| 001 | 664460 | ||
| 005 | 20250814131331.0 | ||
| 035 | |a (RuTPU)RU\TPU\network\35644 | ||
| 035 | |a RU\TPU\network\34728 | ||
| 090 | |a 664460 | ||
| 100 | |a 20210414d2020 k||y0engy50 ba | ||
| 101 | 0 | |a eng | |
| 135 | |a drcn ---uucaa | ||
| 181 | 0 | |a i | |
| 182 | 0 | |a b | |
| 200 | 1 | |a SiC- and Ti₃SiC₂-Based Ceramics Synthesis by Spark Plasma Sintering of Preceramic Paper |f E. P. Sedanova, E. B. Kashkarov, A. M. Lider [et al.] | |
| 203 | |a Text |c electronic | ||
| 300 | |a Title screen | ||
| 320 | |a [References: 7 tit.] | ||
| 330 | |a This paper is devoted to proposing a new approach to the synthesis of SiC- and Ti₃SiC₂-based ceramics by using of preceramic paper as a feedstock. A preceramic paper with SiC and Ti₃SiC₂ powder fillers were sintered by spark plasma sintering (SPS) method for holding time 10 minutes under pressure 20-100 MPa. The temperature for the sintering of SiC- and Ti₃SiC₂-filled paper was 2073-2373 K and 1373-1473 K respectively. The influence of sintering parameters on the materials microstructure was analyzed by scanning electron microscopy. It was revealed that with an increase in pressure from 20 to 100 MPa, the microstructure of the materials becomes denser. It agrees with the results of measuring the density of the sintering materials by the hydrostatic weighting. The determination of Young`s modulus by the acoustic method demonstrates that with the increase of the applied pressure during SPS, Young's modulus of the synthesized SiC- and Ti₃SiC₂-ceramics increase. | ||
| 461 | 0 | |0 (RuTPU)RU\TPU\network\3526 |t Journal of Physics: Conference Series | |
| 463 | |t Vol. 1443 : Issues of Physics and Technology in Science, Power Industry and Medicine |o International Conference for Young Scientists, 30 September to 5 October 2019, Tomsk, Russia |v [012007, 7 p.] |d 2020 | ||
| 610 | 1 | |a электронный ресурс | |
| 610 | 1 | |a труды учёных ТПУ | |
| 701 | 1 | |a Sedanova |b E. P. |c Specialist in the field of nuclear technologies |c Engineer of Tomsk Polytechnic University |f 1994- |g Elizaveta Pavlovna |9 21923 | |
| 701 | 1 | |a Kashkarov |b E. B. |c Physicist |c Associate Professor, Researcher of Tomsk Polytechnic University, Candidate of Physical and Mathematical Sciences |f 1991- |g Egor Borisovich |3 (RuTPU)RU\TPU\pers\34949 |9 18267 | |
| 701 | 1 | |a Lider |b A. M. |c Physicist |c Professor of Tomsk Polytechnic University, Doctor of Technical Sciences |f 1976-2025 |g Andrey Markovich |3 (RuTPU)RU\TPU\pers\30400 |9 14743 | |
| 701 | 1 | |a Abdullina |b K. R. |g Kristina Rinatovna | |
| 701 | 1 | |a Mingazova |b Yu. R. |c Specialist in the field of nuclear technologies |c Engineer of Tomsk Polytechnic University |f 1998- |g Yuliya Rafailovna |3 (RuTPU)RU\TPU\pers\47088 | |
| 701 | 1 | |a Travitsky (Travitzky) |b N. |c specialist in the field of material science |c Professor of Tomsk Polytechnic University |f 1951- |g Nakhum |3 (RuTPU)RU\TPU\pers\42461 | |
| 712 | 0 | 2 | |a Национальный исследовательский Томский политехнический университет |b Инженерная школа ядерных технологий |b Отделение экспериментальной физики |3 (RuTPU)RU\TPU\col\23549 |
| 712 | 0 | 2 | |a Национальный исследовательский Томский политехнический университет |b Инженерная школа ядерных технологий |b Отделение ядерно-топливного цикла |3 (RuTPU)RU\TPU\col\23554 |
| 712 | 0 | 2 | |a Национальный исследовательский Томский политехнический университет |b Инженерная школа новых производственных технологий |b Отделение материаловедения |3 (RuTPU)RU\TPU\col\23508 |
| 801 | 2 | |a RU |b 63413507 |c 20220204 |g RCR | |
| 856 | 4 | |u http://earchive.tpu.ru/handle/11683/65045 | |
| 856 | 4 | |u https://doi.org/10.1088/1742-6596/1443/1/012007 | |
| 942 | |c CF | ||