Surface Modification of the EBM Ti-6Al-4V Alloy by Pulsed Ion Beam; Metals; Vol. 11, iss. 3

Surface Modification of the EBM Ti-6Al-4V Alloy by Pulsed Ion Beam; Metals; Vol. 11, iss. 3

Bibliografische gegevens
Parent link:	Metals Vol. 11, iss. 3.— 2021.— [512, 12 p.]
Coauteur:	Национальный исследовательский Томский политехнический университет Инженерная школа ядерных технологий Отделение экспериментальной физики
Andere auteurs:	Pushilina N. S. Natalia Sergeevna, Stepanova E. N. Ekaterina Nikolaevna, Stepanov A. V. Andrey Vladimirovich, Syrtanov M. S. Maksim Sergeevich
Samenvatting:	Title screen The effect of surface modification of Ti-6Al-4V samples manufactured by electron beam melting (EBM) using a pulsed carbon ion beam is studied in the present work. Based on the results of XRD, SEM, and TEM analysis, patterns of changes in the microstructure and phase composition of the EBM Ti-6Al-4V alloy, depending on the number of pulses of pulsed ion beam exposure, are revealed. It was found that gradient microstructure is formed as a result of pulsed ion beam irradiation of the EBM Ti-6Al-4V samples. The microstructure of the surface layer up to 300 nm thick is represented by the (? + ?”) phase. At depths of 0.3 ?m, the microstructure is mixed and contains alpha-phase plates and needle-shaped martensite. The mechanical properties were investigated using methods of uniaxial tensile tests, micro- and nanohardness measurements, and tribological tests. It was shown that surface modification by a pulsed ion beam at an energy density of 1.92 J/cm2 and five pulses leads to an increase in the micro- and nanohardness of the surface layers, a decrease in the wear rate, and a slight rise in the plasticity of EBM Ti-6Al-4V alloy.
Taal:	Engels
Gepubliceerd in:	2021
Onderwerpen:	электронный ресурс труды учёных ТПУ additive manufacturing electron beam melting titanium alloy pulsed ion beam phase transformation mechanical properties электронно-лучевая плавка титановые сплавы ионные пучки
Online toegang:	https://doi.org/10.3390/met11030512
Formaat:	Elektronisch Hoofdstuk
KOHA link:	https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=664308

Gelijkaardige items

New Ti–35Nb–7Zr–5Ta Alloy Manufacturing by Electron Beam Melting for Medical Application Followed by High Current Pulsed Electron Beam Treatment; Metals; Vol. 11, iss. 7
Gepubliceerd in: (2021)

The influence of chemical etching on porous structure and mechanical properties of the Ti6AL4V Functionally Graded Porous Scaffolds fabricated by EBM; Materials Chemistry and Physics; Vol. 275
Gepubliceerd in: (2022)

Influence of manufacturing parameters on microstructure and hydrogen sorption behavior of electron beam melted titanium Ti-6Al-4V alloy; Materials; Vol. 11, iss. 5
Gepubliceerd in: (2018)

The High-Temperature In Situ Synchrotron Study of the Structural-Phase Transformations in 3D-Printed Ti–6Al–4V and Ti–5Al–3Mo–V Titanium Alloys; Physics of Metals and Metallography; Vol. 125, iss. 9
Gepubliceerd in: (2024)

Influence of heat treatment modes on the structure and property of the Ti–4Al–3V titanium alloy manufactured by the wire electron beam additive technology; Russian Physics Journal; Vol. 68, iss. 4
Gepubliceerd in: (2025)

Hydrogen effect on Ti-6.5Al-3.5Mo-1.5Zr-0.3Si parts produced by electron beam melting; International Journal of Hydrogen Energy; Vol. 44, iss. 55
Gepubliceerd in: (2019)

Transformations of the Microstructure and Phase Compositions of Titanium Alloys during Ultrasonic Impact Treatment Part III: Combination with Electrospark Alloying Applied to Additively Manufactured Ti-6Al-4V Titanium Alloy; Metals; Vol. 13, iss. 5
Gepubliceerd in: (2023)

Hydrogen-Induced Phase Transformation and Microstructure Evolution for Ti-6Al-4V Parts Produced by Electron Beam Melting; Metals; Vol. 8, iss. 5
Gepubliceerd in: (2018)

Beam Current Effect on Microstructure and Properties of Electron-Beam-Melted Ti-6Al-4V Alloy; Journal of Materials Engineering and Performance; Vol. 28, iss. 10
Gepubliceerd in: (2019)

Electron Beam Impact on Microstructure and Microhardness of Ti–6Al–4V Titanium Alloy Produced by Wire Electron-Beam Additive Manufacturing Technology and Selective Laser Alloying at Simulation of Electronic-Beam Welding; Physics of Metals and Metallography; Vol. 125, iss. 7
Gepubliceerd in: (2024)

Effect of Heat Input on the Microstructure and Phase Composition of Additively Manufactured Ti–6Al–4V Alloy; Journal of Surface Investigation. X-ray, Synchrotron and Neutron Techniques; Vol. 18, iss. 6
door: Kamelina K. D. Kristina Dmitrievna
Gepubliceerd in: (2024)

Hydrogen influence on defect structure and mechanical properties of EBM Ti-6Al-4V; Materials Today: Proceedings; Vol. 19, Pt. 5 : International Conference on Modern Trends in Manufacturing Technologies and Equipment 2019
door: Laptev R. S. Roman Sergeevich
Gepubliceerd in: (2019)

Microstructure Formation and Mechanical Properties of Metastable Titanium-Based Gradient Coating Fabricated via Intense Pulse Ion Beam Melt Mixing; Materials; Vol. 16, iss. 8
Gepubliceerd in: (2023)

Effect of the Beam Current during the Electron-Beam Melting of Titanium Alloy Ti-6Al-4V on the Structural Features and Phase Transitions in Gas-Phase Hydrogenation; Journal of Surface Investigation. X-ray, Synchrotron and Neutron Techniques; Vol. 13, No. 3
Gepubliceerd in: (2019)

In situ synthesis of a binary Ti–10at% Nb alloy by electron beam melting using a mixture of elemental niobium and titanium powders; Journal of Materials Processing Technology; Vol. 282
Gepubliceerd in: (2020)

The impact of post manufacturing treatment of functionally graded Ti6Al4V scaffolds on their surface morphology and mechanical strength; Journal of Materials Research and Technology; Vol. 9, iss. 2
Gepubliceerd in: (2020)

Microstructure and Phase Composition of 3D Printed Titanium Metal Matrix Composites Based on Ti-Al-V-Fe System and Reinforced with TiC Particles; Russian Physics Journal; Vol. 67, iss. 9
Gepubliceerd in: (2024)

Influence of beam current on microstructure of electron beam melted Ti-6Al-4V alloy; Progress in Natural Science: Materials International; Vol. 29, iss. 4
Gepubliceerd in: (2019)

Effect of High-Power Ion Beams on the Surface Topography and Structure of the Subsurface Layer of Submicrocrystalline Titanium Alloys; Russian Journal of Non-Ferrous Metals; Vol. 60, iss. 5
Gepubliceerd in: (2019)

Laboratory X-ray Diffraction Complex for In Situ Investigations of Structural Phase Evolution of Materials under Gaseous Atmosphere; Metals; Vol. 10, iss. 4
Gepubliceerd in: (2020)

Особенности формирования сварного шва при имитации электронно-лучевой сварки толстостенных образцов ВТ6, полученных электронно-лучевой аддитивной; Перспективы развития фундаментальных наук; Т. 1 : Физика
door: Яхин А. Альберт
Gepubliceerd in: (2025)

Energy input effects on the microstructure and mechanical behavior of Ti–Nb alloy additivelymanufactured by electron beam melting; Materials Science and Engineering: A; Vol. 938
Gepubliceerd in: (2025)

In-situ X-ray diffraction study of hydrogen-induced phase transformation in wire-feed electron-beam additive manufactured Ti-6Al-4V alloy; Journal of Alloys and Compounds; Vol. 1045
Gepubliceerd in: (2025)

Process window for electron beam melting of Ti–42Nb wt.%; Journal of Materials Research and Technology; Vol. 25
Gepubliceerd in: (2023)

Titanium Alloy Surface Complex Modification; Metallurgist; Vol. 62, iss. 11-12
Gepubliceerd in: (2019)

Structure and phase composition of tungsten alloys modified by compression plasma flows and high-intense pulsed ion beam impacts; Applied Surface Science; Vol. 491
Gepubliceerd in: (2019)

Pulsed ion beam induced changes in a topography of the surface layers of VT1-0 and VT6 titanium alloy; Energy Fluxes and Radiation Effects (EFRE-2016)
Gepubliceerd in: (2016)

Модификация микроструктуры в процессе ультразвуковой ударной электроискровой обработки сварных швов образцов ВТ6, полученных прокаткой и электронно-лучевой аддитивной технологией; Перспективы развития фундаментальных наук; Т. 1 : Физика
door: Яхин А. Альберт
Gepubliceerd in: (2025)

Effect of Ultrasonic Impact Treatment on Microstructure and Fatigue Life of 3D Printed Ti–6Al–4V Titanium Alloy; Physics of Metals and Metallography; Vol. 124, iss. 10
Gepubliceerd in: (2023)

The Structure and Properties of Microcrystalline and Submicrocrystalline Titanium Alloy VT1-0 in the Area of the Electron Beam Welding Seam; Russian Physics Journal; Vol. 60, iss. 6
Gepubliceerd in: (2017)

Developing New Materials for Electron Beam Melting: Experiences and Challenges; Materials Science Forum; Vol. 941 : THERMEC 2018
Gepubliceerd in: (2018)

Titanium Surface Roughness Modification Using Ion Beam and Mechanical Method; Surface Modification of Materials by Ion Beams (SMMIB-2019)
Gepubliceerd in: (2019)

DIN 1.7035 Steel Modification with High Intensity Nitrogen Ion Implantation; Russian Physics Journal; Vol. 61, iss. 2
Gepubliceerd in: (2018)

Craters on the Surface Metal After HPIB of Carbon Ions; Surface Modification of Materials by Ion Beams (SMMIB-2019)
door: Potemkin G. V. Gely Valerjyanovich
Gepubliceerd in: (2019)

The Effect of Irradiation of a Titanium Alloy of the Ti–6Al–4V–Н System with Pulsed Electron Beams on Its Creep; Russian Physics Journal; Vol. 63, iss. 6
Gepubliceerd in: (2020)

Study of phase transformation and surface microstructure of alumina ceramic under irradiation of intense pulsed ion beam; Vacuum; Vol. 187
Gepubliceerd in: (2021)

Formation of the structure and properties of the near-surface layer in alloys of the Ti–6Al–4V–H system under irradiation with a pulsed electron beam; Russian Physics Journal; Vol. 66, No. 2
Gepubliceerd in: (2023)

Changing Mechanisms of High-Temperature Oxidation of Zr-1%Nb Alloy in Air and Steam by Surface Modification with Charged Particles; Journal of Materials Engineering and Performance; Vol. 34, iss. 13
Gepubliceerd in: (2025)

Increasing the Fatigue Durability of an 3D-Printed Ti-6Al-4V Alloy Electron-Beam Welded Joint by Ultrasonic Electropulsing Shock Treatment; Physics of Metals and Metallography; Vol. 123, iss. 12
Gepubliceerd in: (2022)

Grain-boundary diffusion of titanium in Zr-1 wt.%Nb alloy under irradiation with a pulsed electron beam; Russian Physics Journal; Vol. 66, No. 11
Gepubliceerd in: (2024)