Plasma-immersion formation of high-intensity gaseous ion beams; Vacuum; Vol. 165

Plasma-immersion formation of high-intensity gaseous ion beams; Vacuum; Vol. 165

Bibliografiska uppgifter
Parent link:	Vacuum Vol. 165.— 2019.— [P. 127-133]
Institutionell upphovsman:	Национальный исследовательский Томский политехнический университет Инженерная школа ядерных технологий Научная лаборатория высокоинтенсивной имплантации ионов
Övriga upphovsmän:	Ryabchikov A. I. Aleksandr Ilyich, Sivin D. O. Denis Olegovich, Korneva O. S. Olga Sergeevna, Ananin P. S. Petr Semenovich, Bumagina A. I. Anna Ivanovna, Stepanov I. B. Igor Borisovich
Sammanfattning:	Title screen The symbiosis of plasma-immersion extraction of ions and their subsequent ballistic focusing in the hemisphere geometry of the focusing system was used to form a high intensity nitrogen, argon, and hydrogen ion beams. The gas-discharge plasma was formed using a hot-cathode-arc discharge source. The regularities of the formation of high-intensity ion beams of various gases from according to the pressures of the working gases, the plasma density depending dependence on the bias potential amplitudes in the range of 0.9–2.4?kV, frequencies in the range of 10–100?kHz and pulse durations in the range of 2–80 µs were investigated. The possibility of the stable forming of axially symmetric gas ion beams with a current density of up to hundreds of mA/cm2 was shown. Nitrogen ion beams with a maximum current density of 0.7 A/cm2 at the ion current of 0.6 A were obtained. Studies at nitrogen pressures in the range of 0.3–1.8?Pa revealed that a decrease in the gas pressure during the generation of a gas-discharge plasma caused a significant increase in the ion current amplitude at the collector. Режим доступа: по договору с организацией-держателем ресурса
Språk:	engelska
Publicerad:	2019
Ämnen:	электронный ресурс труды учёных ТПУ plasma-immersion extraction plasma ions acceleration ballistic focusing repetitively pulsed high-intensity beam of gas ions
Länkar:	https://doi.org/10.1016/j.vacuum.2019.04.024
Materialtyp:	Elektronisk Bokavsnitt
KOHA link:	https://koha.lib.tpu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=664276

Liknande verk

High-current-density gas ion ribbon beam formation; Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment; Vol. 906
Publicerad: (2018)

Regularities of Plasma-Immersion Formation of Long-Pulse High-Intensity Titanium Ion Beams; Russian Physics Journal; Vol. 61, iss. 7
Publicerad: (2018)

DIN 1.7035 Steel Modification with High Intensity Nitrogen Ion Implantation; Russian Physics Journal; Vol. 61, iss. 2
Publicerad: (2018)

High intensity plasma immersion metal ion beam source for surface modification of materials; Energy Fluxes and Radiation Effects (EFRE-2016)
Publicerad: (2016)

Investigation of the Features of High-Intensity Implantation of Nitrogen Ions into Titanium; Journal of Surface Investigation. X-ray, Synchrotron and Neutron Techniques; Vol. 17, s. 1
Publicerad: (2023)

Two Modes of Transportation of a High Current Ion Beam with Ballistic Focusing; Energy Fluxes and Radiation Effects (EFRE-2020 online)
av: Koval T. V. Tamara Vasilievna
Publicerad: (2020)

Accumulation of macroparticles on a substrate in vacuum arc titanium plasma; Известия вузов. Физика; Т. 57, № 12, ч. 3
Publicerad: (2014)

Formation of High-Power Pulsed Titanium Ion Beams of Submillisecond Duration from Vacuum Arc Plasma; Russian Physics Journal; Vol. 65, iss. 11
Publicerad: (2023)

High-intensity ion beams with submillisecond duration for synergistic of ion implantation and energy impact on the surface; Energy Fluxes and Radiation Effects (EFRE); International Conference on Modification of Materials with Particle Beams and Plasma Flows (16th CMM)
Publicerad: (2022)

Study of the Regularities of Low- and Super-Low-Energy High-intensity Metal Ion Beams Formation; Energy Fluxes and Radiation Effects (EFRE-2020 online)
Publicerad: (2020)

Focusing of intense pulsed ion beam by magnetically insulated diode for material research; Surface and Coatings Technology; Vol. 384
Publicerad: (2020)

Effect on microstructure of Fe80B13Si7 metallic glass irradiated by high intensity pulsed ion beam and He ions; Surface and Coatings Technology; Vol. 449
Publicerad: (2022)

Numerical simulation of the features and regularities of the high-power density ion beam formation; Energy Fluxes and Radiation Effects (EFRE); International Conference on Modification of Materials with Particle Beams and Plasma Flows (16th CMM)
av: Ryabchikov A. I. Aleksandr Ilyich
Publicerad: (2022)

Special Aspects of High-Intensity Low-Energy Ion Implantation; Russian Physics Journal; Vol. 63, iss. 10
Publicerad: (2021)

Transport of a Low-Energy Ion Beam with Ballistic Focusing; Plasma Physics Reports; Vol. 47, iss. 8
av: Koval T. V. Tamara Vasilievna
Publicerad: (2021)

Formation of hardened layer in WC-TiC-Co alloy by treatment of high intensity pulse ion beam and compression plasma flows; Surface and Coatings Technology; Vol. 204, iss. 12-13
Publicerad: (2010)

Effect on mechanics properties and microstructure of molybdenum by high intensity pulsed ion beam irradiation; Surface and Coatings Technology; Vol. 384
Publicerad: (2020)

Surface Modification of ZrO2-3Y2O3 with Highintensity Pulsed N2+ Ion Beams; Russian Physics Journal; Vol. 63, iss. 1
Publicerad: (2020)

High-intensity pulsed ion beam focusing by its own space charge; Laser and Particle Beams; Vol. 36, iss. 4
Publicerad: (2018)

High-Current Pulsed Induction Plasma Source for Generation of High Intensity Ion Beams of Various Gases; Surface Modification of Materials by Ion Beams (SMMIB-2019)
Publicerad: (2019)

Study of the influence of a powerful pulsed ion beam on titanium deeply-doped with aluminum; Vacuum; Vol. 217
Publicerad: (2023)

Submillisecond Chromium Ion Beams with High-Pulse Power Density; Russian Physics Journal; Vol. 67, iss. 9
av: Gurulev A. V. Aleksandr Valerjevich
Publicerad: (2024)

Effects on structure and properties of Zr55Al 10Cu30Ni5 metallic glass irradiated by high intensity pulsed ion beam; Applied Surface Science; Vol. 313
Publicerad: (2014)

Modification of AISI 420 Steel under Repetitively Pulsed Energetic Impact on the Surface of a Powerful Ion Beam of Submillisecond Duration; Russian Physics Journal; Vol. 67, iss. 5
av: Merzlyakov I. Ivan
Publicerad: (2024)

Features of High-Intensity Implantation of Chromium into Zr1%Nb Alloy Using a High-Power Density Repetitively-Pulsed Ion Beam; Journal of Surface Investigation: X-ray, Synchrotron and Neutron Techniques; Vol. 19, iss. 4
Publicerad: (2025)

Changing Mechanisms of High-Temperature Oxidation of Zr-1%Nb Alloy in Air and Steam by Surface Modification with Charged Particles; Journal of Materials Engineering and Performance; Vol. 34, iss. 13
Publicerad: (2025)

Formation of nanoscale carbon structures in the surface layer of metals under the impact of high intensity ion beam; Applied Surface Science; Vol. 310
Publicerad: (2014)

Collective Acceleration of Helium Ions from Its Residual Atmosphere in a Luce Diode; Quantum Beam Science; Vol. 7, iss. 4
av: Ryzhkov V. A. Vladislav Andreevich
Publicerad: (2023)

Mixing in TI/STEEL system under High-intensity pulsed ion beam impact; High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes; Vol. 26, iss. 1
Publicerad: (2022)

Effect of Preliminary Irradiation of 321 Steel Substrates with High-Intense Pulsed Ion Beams on Scratch Test Results of Subsequently Deposited AlN Coatings; Coatings; Vol. 11, iss. 10
Publicerad: (2021)

Investigation of Regularities of High-Intensity Ion Implantation in Combination with Subsequent Exposure to the Surface of a High-Current Electron Beam; Energy Fluxes and Radiation Effects (EFRE-2020 online)
Publicerad: (2020)

Simulation and experimental studies on the formation of high-power titanium ion beams for the synergy of ion implantation and energy impact on the surface; Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms; Vol. 533
Publicerad: (2022)

Low-energy high-current plasma immersion implantation of nitrogen ions in plasma of non-self-sustained arc discharge with thermionic and hollow cathodes; Surface and Coatings Technology; Vol. 340
Publicerad: (2018)

Influence of magnetic field of a radial focusing external magnetically insulated diode on emission behavior of intense pulsed ion beam; Nuclear Instruments and Methods in Physics Research B; Vol. 537
Publicerad: (2023)

Shielding of energy deposition by ablation of plastics under intense pulsed ion beam irradiation; Vacuum; Vol. 174
Publicerad: (2020)

Features of the Formation of Ultralow Energy High-Intensity Metal and Gaseous Ion Beams; IEEE Transactions on Plasma Science; Vol. 49, iss. 9
Publicerad: (2021)

A method of real-time monitoring beam output stability of intense pulsed ion beam; Acta Physica Sinica; Vol. 72, iss. 17
Publicerad: (2023)

Features of titanium ion beams formation taking into account ion-electron emission realizing the synergy of high-intensity ion implantation and pulsed energy impact on the surface; Materials. Technologies. Design; Т. 5, № 4 (14)
av: D. O. Dimitry Olegovich
Publicerad: (2023)

Study on the damage of Zr63.5Cu23Al9Fe4.5 amorphous and crystalline alloys irradiated by high intensity pulsed ion beam; Journal of Alloys and Compounds; Vol. 923
Publicerad: (2022)

High-power ion beam sources for industrial application; Surface and Coatings Technology; Vol. 96, iss. 1
Publicerad: (1997)